Tag Archives: mastertemp

Control Board Kit Switch Pad For Pentair MasterTemp NA/LP 42002-0007S with 472610Z

Control Board Kit Switch Pad For Pentair MasterTemp NA/LP 42002-0007S with 472610Z

Control Board Kit Switch Pad For Pentair MasterTemp NA/LP 42002-0007S with 472610Z

Control Board Kit Switch Pad For Pentair MasterTemp NA/LP 42002-0007S with 472610Z

Control Board Kit Switch Pad For Pentair MasterTemp NA/LP 42002-0007S with 472610Z

Control Board Kit Switch Pad For Pentair MasterTemp NA/LP 42002-0007S with 472610Z

Control Board Kit Switch Pad For Pentair MasterTemp NA/LP 42002-0007S with 472610Z

Control Board Kit Switch Pad For Pentair MasterTemp NA/LP 42002-0007S with 472610Z

Control Board Kit Switch Pad For Pentair MasterTemp NA/LP 42002-0007S with 472610Z

Control Board Kit Switch Pad For Pentair MasterTemp NA/LP 42002-0007S with 472610Z

Control Board Kit Switch Pad For Pentair MasterTemp NA/LP 42002-0007S with 472610Z

Compatible with Pentair MasterTemp NA and LP Series pool and spa heater electrical systems. Also compatible with Sta-Rite Max-E-Therm NA and LP Series pool and spa heater electrical systems. Compatible with Mastertemp 400, Mastertemp 300, Mastertemp 250, Mastertemp 200, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805. No need for any complicated setup. Simply unscrewed the front and back panels, unscrewed the top, yanked all the connectors out and plugged into new board. Also install this membrane pad in minutes for attachment on end of pad makes installation easy. Direct replacement, Impossible to mess up, suitable for DIY. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System. Begin by removing the old circuit board by shutting down all power and opening the top of the heater tohave access to the old board. Unplug the membrane pad from the board and remove the wire connectors connected to the old board. Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out. Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater. A Damage caused by undue ware&tear, misuse, improper installation or operation, neglect, accidents. B Damage caused by natural disaters, flood fire, lightning or pollution. C If item was opened, any parts removed or repaired by any unauthorized person.

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

Fit for MasterTemp 200, MasterTemp 250, MasterTemp 300, MasterTemp 400, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805 and compatible with All NA and LP Series Pool/Spa Heater Electrical Systems. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System. INSTALLATION: First, remove the old circuit board by turning off all power and opening the top of the heater to access the old circuit board. Unplug the membrane pad from the board, then remove the wire connector attached to the old board. Satisfaction Guarantee–100% satisfaction guarantee. Compatible with Pentair MasterTemp NA and LP Series Pool and Spa Heater Electrical Systems, and for Pentair Sta-Rite Max-E-Therm NA and LP-Series pool and spa heater electrical systems. Made of quality material, professional PCB soldering, with anti-oxidation, heat, moisture resistance. 472610Z Switch Membrane Pad. 472610Z membrane pad fits for MasterTemp pool/spa heater electrical system switch membrane pad replacement. Replacing the switch membrane pad fixes the heating performance of the system. The buttons on the board are easy to use and their functions are clearly marked. Accurate hole alignment without covering the digital display and LED lights. A replacement can make your heater electrical system like new. Rebuild your Pool and Spa Heater Electrical Systems. Begin by removing the old circuit board by shutting down all power and opening the top of the heater tohave access to the old board. Unplug the membrane pad from the board and remove the wire connectors connected to the old board. Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out. Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater.

42002-0007S Control Board Kit with472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with472610Z Switch Pad For Pentair MasterTemp NA/LP

Compatible with Pentair MasterTemp NA and LP Series pool and spa heater electrical systems. Also compatible with Sta-Rite Max-E-Therm NA and LP Series pool and spa heater electrical systems. Compatible with Mastertemp 400, Mastertemp 300, Mastertemp 250, Mastertemp 200, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805. No need for any complicated setup. Simply unscrewed the front and back panels, unscrewed the top, yanked all the connectors out and plugged into new board. Also install this membrane pad in minutes for attachment on end of pad makes installation easy. Direct replacement, Impossible to mess up, suitable for DIY. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System. Begin by removing the old circuit board by shutting down all power and opening the top of the heater tohave access to the old board. Unplug the membrane pad from the board and remove the wire connectors connected to the old board. Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out. Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater. Return will be aproved directly for orders bought by mistake. Exchanging or refunding is available for orders DOA or quality issue. We will try our best to serve to your satisfaction. Please do not leave bad feedback without noticing us the issue you encontered. Thanks for your understanding.

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

Compatible with Pentair MasterTemp NA and LP Series pool and spa heater electrical systems. Also compatible with Sta-Rite Max-E-Therm NA and LP Series pool and spa heater electrical systems. Compatible with Mastertemp 400, Mastertemp 300, Mastertemp 250, Mastertemp 200, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805. World-class advanced technology with high quality materials and high accuracy process. Provides high performance, high stability and long-lasting reliability. If your old Starite or Pentair Mastertemp Control Board no longer starts up your heater or the display no longer illuminated, or your pool heater is turning on by itself at random, maybe it is time to get a circuit board and membrane pad replacement! No need for any complicated setup. Simply unscrewed the front and back panels, unscrewed the top, yanked all the connectors out and plugged into new board. Also install this membrane pad in minutes for attachment on end of pad makes installation easy. Direct replacement, Impossible to mess up, suitable for DIY. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System.

Pentair MasterTemp Max-E-therm Gas Heater Control Board (461105)

Pentair MasterTemp Max-E-therm Gas Heater Control Board (461105)

Pentair MasterTemp Max-E-therm Gas Heater Control Board (461105).

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

Compatible with Pentair MasterTemp NA and LP Series pool and spa heater electrical systems. Also compatible with Sta-Rite Max-E-Therm NA and LP Series pool and spa heater electrical systems. Compatible with Mastertemp 400, Mastertemp 300, Mastertemp 250, Mastertemp 200, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805. World-class advanced technology with high quality materials and high accuracy process. Provides high performance, high stability and long-lasting reliability. If your old Starite or Pentair Mastertemp Control Board no longer starts up your heater or the display no longer illuminated, or your pool heater is turning on by itself at random, maybe it is time to get a circuit board and membrane pad replacement! No need for any complicated setup. Simply unscrewed the front and back panels, unscrewed the top, yanked all the connectors out and plugged into new board. Also install this membrane pad in minutes for attachment on end of pad makes installation easy. Direct replacement, Impossible to mess up, suitable for DIY. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System.

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

Fit for MasterTemp 200, MasterTemp 250, MasterTemp 300, MasterTemp 400, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805 and compatible with All NA and LP Series Pool/Spa Heater Electrical Systems. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System. First, remove the old circuit board by turning off all power and opening the top of the heater to access the old circuit board. Unplug the membrane pad from the board, then remove the wire connector attached to the old board. Satisfaction Guarantee–100% satisfaction guarantee. Compatible with Pentair MasterTemp NA and LP Series Pool and Spa Heater Electrical Systems, and for Pentair Sta-Rite Max-E-Therm NA and LP-Series pool and spa heater electrical systems. Made of quality material, professional PCB soldering, with anti-oxidation, heat, moisture resistance. 472610Z Switch Membrane Pad 472610Z membrane pad fits for MasterTemp pool/spa heater electrical system switch membrane pad replacement. Replacing the switch membrane pad fixes the heating performance of the system. The buttons on the board are easy to use and their functions are clearly marked. Accurate hole alignment without covering the digital display and LED lights. A replacement can make your heater electrical system like new. Rebuild your Pool and Spa Heater Electrical Systems. Begin by removing the old circuit board by shutting down all power and opening the top of the heater tohave access to the old board. Unplug the membrane pad from the board and remove the wire connectors. Connected to the old b. Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out. Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater.

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System. Installation: First, remove the old circuit board by turning off all power and opening the top of the heater to access the old circuit board. Unplug the membrane pad from the board, then remove the wire connector attached to the old board. Made of quality material, professional PCB soldering, with anti-oxidation, heat, moisture resistance. 472610Z Switch Membrane Pad. 472610Z membrane pad fits for MasterTemp pool/spa heater electrical system switch membrane pad replacement. Replacing the switch membrane pad fixes the heating performance of the system. The buttons on the board are easy to use and their functions are clearly marked. Accurate hole alignment without covering the digital display and LED lights. A replacement can make your heater electrical system like new. We are duty off on weekends and other public holidays. International Buyers Please Note. If you need to return, please double check to make sure the item does not work and contact our customer service representative, let us know the detailed problem and send us some photos for confirmation. Then get a unique address to return. We only accept return for original package, please make sure the item has not been used or installed. We reserve the right to refuse any return for any request that does not meet these requirements. Best price, quality and service. Follow us and get more promotional news. Providing good customer service is our first priority. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Equipment Parts”. The seller is “angelcitytrading” and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Netherlands, Slovakia, Slovenia, Equatorial Guinea, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Kuwait, Liechtenstein, Benin, Algeria, Antigua and Barbuda, Swaziland, Italy, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Tajikistan, Vietnam, Malta, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Colombia, Spain, Estonia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, Canada, Turks and Caicos Islands, Chad, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Uganda, Luxembourg, Brazil, Turkey, Germany, Egypt, Latvia, Jamaica, South Africa, Brunei Darussalam, Honduras.
  • Pool Type: Above-Ground
  • Model: 42002-0007S, 472610Z
  • Style: Modern
  • UPC: 0768481539135
  • EAN: 0768481539135
  • Compatible Brand: For Pentair
  • Brand: Pentair
  • Type: Control Board Kit
  • Item Height: 6 in
  • Compatible Model: Pentair MasterTemp NA
  • MPN: 42002-0007S
  • Item Length: 6 in
  • Item Depth: 6 in

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP

Fit for MasterTemp 200, MasterTemp 250, MasterTemp 300, MasterTemp 400, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805 and compatible with All NA and LP Series Pool/Spa Heater Electrical Systems. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System. INSTALLATION: First, remove the old circuit board by turning off all power and opening the top of the heater to access the old circuit board. Unplug the membrane pad from the board, then remove the wire connector attached to the old board. Satisfaction Guarantee–100% satisfaction guarantee. Compatible with Pentair MasterTemp NA and LP Series Pool and Spa Heater Electrical Systems, and for Pentair Sta-Rite Max-E-Therm NA and LP-Series pool and spa heater electrical systems. Made of quality material, professional PCB soldering, with anti-oxidation, heat, moisture resistance. 472610Z Switch Membrane Pad. 472610Z membrane pad fits for MasterTemp pool/spa heater electrical system switch membrane pad replacement. Replacing the switch membrane pad fixes the heating performance of the system. The buttons on the board are easy to use and their functions are clearly marked. Accurate hole alignment without covering the digital display and LED lights. A replacement can make your heater electrical system like new. Rebuild your Pool and Spa Heater Electrical Systems. Begin by removing the old circuit board by shutting down all power and opening the top of the heater tohave access to the old board. Unplug the membrane pad from the board and remove the wire connectors connected to the old board. Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out. Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Other Pool Equipment & Parts”. The seller is “singrysingry” and is located in this country: US. This item can be shipped to United States.
  • Brand: Unbranded
  • Pool Type: Above-Ground
  • Type: Pool Parts
  • Model: 42002-0007S
  • Style: Modern
  • MPN: 42002-0007S Control Circuit Board
  • UPC: 768481539135

Pentair Control Board With Digital Keypad 476199 A Mastertemp

Pentair Control Board With Digital Keypad 476199 A Mastertemp

Pentair Control Board With Digital Keypad 476199 A Mastertemp

Pentair Control Board With Digital Keypad 476199 A Mastertemp

Pentair Control Board With Digital Keypad 476199 A Mastertemp

Pentair Control Board With Digital Keypad 476199 A Mastertemp

Pentair Control Board With Digital Keypad 476199 A Mastertemp

Pentair Control Board With Digital Keypad 476199 A Mastertemp

Pentair Control Board With Digital Keypad 476199 A Mastertemp. These were removed for upgrades in good working condition. Comes as pictured with pcba board and keypad.. May have a little bit of light dust etc. Still in good working condition. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “hoppe_mik” and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Netherlands, Iraq, Slovakia, Slovenia, Equatorial Guinea, Thailand, Sweden, Iceland, Macedonia, Belgium, Israel, Kuwait, Liechtenstein, Benin, Algeria, Italy, Swaziland, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Malta, Tajikistan, Vietnam, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Greece, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Colombia, Spain, Estonia, Bermuda, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Jordan, Guinea, Canada, Chad, Andorra, Romania, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Luxembourg, Uganda, Brazil, Turkey, Germany, Egypt, Latvia, Jamaica, South Africa, Brunei Darussalam.
  • BTUh Heating Rating: na
  • Power Source: Coal, Electric, Solar
  • Bundle Description: lot of 4 mixed part numbers
  • Custom Bundle: No
  • MPN: 42002-0007, 476199
  • Suitable For: Above Ground Pools, Hot Tubs, Inflatable & Kid Pools, In Ground Pools
  • Brand: INSYNC ENGINEERING
  • Type: heater keypad
  • Tank Capacity: na
  • Heating System: na
  • Voltage: 24 V
  • Amperage: 476199 A
  • Model: COMPATIBLE WITH Pentair 461106
  • Features: Digital Display
  • Water Temperature Range: na
  • Power: na
  • UPC: 637769990862