1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Note: Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. How to use 1. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight 3. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. The installation must be according to the normal power indicated on the label. The amperage must not at any time exceed the value indicated on the label It is recommended that you consult a state-registered electrician. Place the pump in a dry area with good ventilation. The ambient temperature must not exceed 40? The pumps are only suitable for counter-clockwise rotation when viewing from the pump end. Three phase motors can rotate in either direction. Interchanging any of the cables on a three-phase motor will reverse the rotation. Momentarily start, or bump the motor without water in the tank, to check the rotation of the pump shaft. Before disconnecting electrical connections, shut off electricity at its source. Newer work on pump without making certain the power is OFF. This appliance is not intended for use by persons, including children with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety Children should be supervised to ensure that they do not play with the appliance. Problem Description: 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water Solution: When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process, generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise, pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. 1.5HP&2.0HP 110-240V Swimming Pool Pump. 2.5HP 110V Swimming Pool Pump. Powerful Self-Priming IP55 2.5HP Electric Motor, low noise with quiet operation and no leak. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. Type : Pool Pump Dual voltage : 110-120V/220V-240V Power : 1100w Horsepower : 1.5 HP Speed : 3450 RPM Max. Flow : 6500 GPH Max. Temp : 104 Degree Fahrenheit (40 Degree Celsius) Frequency : 60HZ Qmax : 410 L/min Hmax : 15.5 Meter Power Cord : 59 Certification : CSA and ETL. Model : SPPE 250 Power : 1850W/2.5HP Voltage : 110V / 60Hz Max. Flow : 560 L/m IP55 INS CL. 50 C Amps : 6.8 Head : Max 19m / 62.34ft Capacitor : 25 F Inlet : 1.5″ Internal Outlet : 1.5″ Internal Pipe Compatibility : Fit 1.5 inch plumbing internally Noise Level. Weight : 10.2 kg / 22.5 lbs. Type : Pool Pump Dual voltage : 110-120V/220V-240V Power : 1500w Horsepower : 1.5 HP Speed : 3450 RPM Max. Swimming Pool Pump X 1. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. We have Five warehouses located in CA, TX, NY, NJ & GA. Some products may be dispatched in more than one carton. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “home01-equipment” and is located in this country: US. This item can be shipped to United States.
  • Size: 2.0HP 115-230V
  • Model: 1.5/2/2.5HP
  • Motor Shaft Material: Stainless Steel
  • Speed: Single-Speed
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1.5HP/2.5HP
  • Item Height: 11.4\
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • RPM: 3450/min
  • Power Cord: 59\
  • Item Width: 9.6\
  • Pool Type: In Ground &Above Ground
  • Warranty: Lifetime
  • Color: Black
  • Energy Star: A+++
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Type: Pool Pump
  • Installation: Universal Installation
  • Item Weight: 26lbs
  • Brand: SUPER-HYPRESS
  • Material: ABS,PVC, Stainless Steel, Copper
  • Power Source: Corded
  • Features: Easy Assembly, Easy Installation, Noise Vibration Reduction, Portable, Rust Resistant
  • Item Length: 22.4\
  • Suitable For: Above Ground Pools, Inflatable & Kid Pools, In Ground Pools
  • Certification: UL Certification
  • Qmax: 410 L/min
  • Hmax: 15.5 Meter
  • Horsepower: 1.5HP/2.5HP
  • Amper: 10.8/5.4A
  • Voltage: 110-120V/220V-240V

How To Make Cheap Swimming Pool At Your Backyard

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

250kpa max working pressure. 5 way dial valve including filtration, backwash, rinse, waste, closed. Corrosion-proof and UV-resistant body. Underdrain with side-slotted laterals draws water evenly across the full diameter of the sand bed for higher flow, better filtration, longer cycles and more efficient backwashing. Standard pump and film filter base, easy to install and service. Suitable for pools of all types and sizes. For swimming pools up to 5,000-9,000 gal. Note:Inlet/Outlet Fitting: 1-1/4″NPT (fits intex 1-1/4″ hose) & 1-1/2″ Outlet (can fit to Intex 1-1/4″ hose with adapter not included). Ffective filtration area :0.05? Required media type : #20 silica sand. Required media amount :10KG. Pump rated input power :250W/0.35HP. Pump strainer basket : No. Pump suction height : 0m. Pump max flow rate. System flow rate : 5.9m³/h. Pipe Size:1 1/2in. Package size :473139.5CM. 1 x Pool Pump. 5 way dial valve. 1.5in/1.25in filter connector hose. 1.5 in Pool Pump connectors. Pump and filter are perfectly engineered to provide optimum flow rates that promotes clean water quality. 5-Way multi port provides for easy use and quick backwashing. High efficiency pump lowers system cost and ensures years of quiet operation. Flow rate of 2640 Gallons Per Hour swimming pool pump works swiftly and efficiently. Machine will protect users’s safety entirely with build-in automatic thermal overload protector. Pump strainer basket is the largest in its class with an easy open, quick lock, transparent pump lid which mean less work and more swimming. Please contact our customer service team immediately if: 1. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “fansdealonline” and is located in this country: US. This item can be shipped to United States.
  • Cartridge Type: A/C
  • Compatible Brand: For Intex
  • Pool Type: Above-Ground
  • Item Length: 20in
  • Recommended Pool Volume: 5,000-9,000gal
  • Item Height: 24in
  • Material: Safety materials ,tank made of HDPE
  • System Flow Rate: 2640GPH
  • Voltage: 110-120V
  • Manufacturer Warranty: Lifetime
  • Tank Capacity: 14L
  • Water Type: All Water Types
  • Features: Easy Installation, Easy Assembly
  • UPC: 0192072016376
  • Brand: Summer Waves
  • Minimum Pump Power Requirement: 0.25hp
  • Type: Filter Pump
  • Maximum Flow Rate: Single-Speed
  • Model: P53ST1100
  • MPN: P53ST1100
  • Suitable For: Above Ground Pools

CENTURY B2853V1 Motor, 1 HP, 3,450 rpm, 56Y, 115/230V

CENTURY B2853V1 Motor, 1 HP, 3,450 rpm, 56Y, 115/230V

CENTURY B2853V1 Motor, 1 HP, 3,450 rpm, 56Y, 115/230V

Motor, 1 HP, 3,450 rpm, 56Y, 115/230V. Pool and Spa Pump Motor, Motor Enclosure Design Open Dripproof, Motor Thermal Protection Auto, Phase Single, Standards CSA, UL. This single-compartment, permanent split capacitor motor can be used as an equivalent replacement for most popular pool and spa manufacturers’ pumps. Must equal or exceed service factor and HP for proper replacement. Auto thermal protection helps protect against damage caused by overheating. UL Recognized and CSA Certified. Grainger Part #:16U442. Add to Favorite Sellers. Sign up to Newsletter. View more great items. ECONOCO EBL/12KB Shelving Bracket, Steel, LdCap: 40 lb, PK48. THERMAL DYNAMICS 9-1260 Victor Plasma Torch Cable Cover. DURHAM MFG 206-95-D939 Drawer, 2 3/16″x2″x2 1/2,20Cmprtmt. ARMSTRONG 2907 Ceiling Tile, 24″ W, 48″ L, 5/8 Thick, PK16. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.
  • UPC: 0712971243170
  • EAN: 0712971243170
  • Brand: CENTURY
  • Minimum Pump Power Requirement: 1.5hp, 1.5 HP
  • Type: Pool Pump Motor
  • Power Source: Electric
  • Voltage: 1
  • Maximum Flow Rate: Single-SPEED, Single-Speed
  • Model: B854, B2854
  • MPN: B2854
  • Features: Insulated
  • Material: Aluminum
  • Suitable For: In Ground Pools

4 Ways To Tap Your Home Equity And Why You Shouldn T Do It

Pentair Water Pool Spa 619917Z 500W 5G Intellibrite Replacement PCB White 619919

Pentair Water Pool Spa 619917Z 500W 5G Intellibrite Replacement PCB White 619919

Pentair Water Pool Spa 619917Z 500W 5G Intellibrite Replacement PCB White 619919

Pentair Water Pool Spa 619917Z 500W 5G Intellibrite Replacement PCB White 619919

Pentair Water Pool and Spa 619917Z 500W 5G Intellibrite Replacement Engine White. 500W Intellibrite Replacement Engine 5G White Led 2Nd Gen. Intellibrite replacement light engine. Fits Pentair IntelliBrite 5g 2nd generation color LED lights. Product Dimensions 5 1/2″ x 3 3/4″ inches. No gasket or hardware included. Package Quantity 1 Replacement Copper PCB. Intellibrite LED 12VAC Light Bulb. 5g White 500W LED Pool Lights. Standard pool and spa lighting is a must for nighttime pool safety and enjoyment. But their usefulness doesn’t end with simply illuminating darkened pools. Standard pool lights can also enhance a pool and spa’s beauty and help create an inviting backyard environment after the sun goes down. IntelliBrite 5g LED pool lights provide the most energy-efficient lighting ever. They use 86% less electricity than incandescent and halogen pool lights. Now pool owners can enjoy the most energy-efficient LED lights available. The brightest most energy efficient LED pool light on the market. Energy efficient utilizing up to 86% less energy than comparable incandescent lights. Superior geometry and exclusive reflector design combine to create a wider beam and more uniform light distribution. Compatible with Pentair stainless steel and plastic niches. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool & Spa Lights”. The seller is “djkurse” and is located in this country: US. This item can be shipped to United States.
  • Light Color: White
  • Power Source: Corded
  • Color: White
  • MPN: 619916Z
  • Item Length: 1
  • Item Depth: 1
  • Suitable For: Hot Tubs, In Ground Pools
  • Brand: Pentair
  • Type: Replacement Bulb
  • EAN: 788379807160
  • Item Height: 1
  • Voltage: 12 V
  • Manufacturer: Pentair
  • Model: 619917Z
  • Item Width: 1
  • Item Weight: 2
  • Lighting Technology: LED
  • Product Line: Pentair IntelliBrite

Puri Tech Repl Motor Kit Sta-Rite Dura-Glas 1HP P2RA5E-181L USQ1102 withGO-KIT-6

Puri Tech Repl Motor Kit Sta-Rite Dura-Glas 1HP P2RA5E-181L USQ1102 withGO-KIT-6

Pool Chemicals & Testing. Spa Chemicals & Sanitizers. Sign up to receive special insider notifications of deals, promotions, and new items! Puri Tech Repl Motor Kit Sta-Rite Dura-Glas 1HP P2RA5E-181L USQ1102 w/GO-KIT-6. Smith Century, a trusted name for pool replacement motors. 15.3/7.6 Max Amps. 1.25 Service Factor. O-39 Drain Plug O-Ring. Questions about this item? To make sure we get the order to you as fast as possible, orders are processed as soon as they come in. We cannot guarantee that any order can be cancelled once placed and processed. Included in this but not limited to are Heat Pumps, Gas Heaters, Large Filters, Slides, and Diving Boards. These products are delivered to the front of the driveway, not to the garage or installation site. The trucking company is not responsible to transport your items anywhere other than the front of your driveway. In this circumstance, we will call you with the additional charges. To help make this process as smooth as possible please follow these guidelines. Sign Bill of Lading (receiving bill). This document says that the order has been received. This all states that the order has arrived in good condition. It is the customer’s responsibility to inspect all packages received. This document also states the number of cartons you are receiving, please make sure this number is the same as the actual number of cartons received. It is your responsibility to make sure your order is in good condition upon receipt. Backyard Pool Superstore is here for all of your pool and backyard needs. Here at Backyard Pool Superstore, we understand that mistakes can be made. The packaging must be resealed with. See below for more details. When you sign for the product, you state the product arrived in good condition, and you accept the condition it was delivered in. Our staff is dedicated to making sure your experience with us is not only good, but the best! We are not just “Internet retailers”, we are pool and backyard professionals that have been in business for over 20 years. We pride ourselves on fast, professional customer service. We use the latest technology to assist you with your pool, spa, patio, and backyard needs. The Best Customer Service and Expert Advice. With many years of experience in all aspects of the pool and backyard industry, we are here to help you with all of your questions. If one of our staff members cannot help you immediately, we will not rest until we find an answer to your question. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “backyardpoolsuperstore” and is located in this country: US. This item can be shipped to United States.
  • Pool Type: In-Ground
  • Speed: Single-Speed
  • Horsepower: 1hp
  • UPC: 737993427445
  • Brand: A. O. Smith
  • Minimum Pump Power Requirement: 1/6 hp
  • Type: Standard Pool Pump
  • Model: A. O. Smith USQ1102
  • MPN: USQ1102
  • Features: Single-Speed
  • Suitable For: In Ground Pools

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

The Polaris PB4-60 Booster Pump provides a dedicated supply of pressure to your pressure side pool cleaner that allows it to clean the pool effectively. For more than 20 years, Polaris booster pumps have been the benchmark for powerful Polaris cleaner performance. The Polaris PB4-60 Booster Pump is suitable for use with all pressure side pool cleaners that require the use of a booster pump. Polaris PB4-60 Booster Pump Attributes The Polaris PB4-60 Booster Pump for pressure side pool cleaners runs at 3/4 HP and 115/230V and draws 12.8/6.4 Amps respectively. The Polaris PB4-60 Booster Pump works with any automatic pressure side pool cleaner that requires the use of a booster pump. For best performance, combine the Polaris PB4-60 with pressure side pool cleaners such as the Polaris 280, 380. Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V. Polaris PB4-60 Booster Pump Attributes. The Polaris PB4-60 Booster Pump for pressure side pool cleaners runs at 3/4 HP and 115/230V and draws 12.8/6.4 Amps respectively. For best performance, combine the Polaris PB4-60 with pressure side pool cleaners such as the Polaris 280, 380, 3900 Sport, and the Kreepy Krauly Letro Legend. The Polaris PB4-60 comes ready for installation with four quick connect fittings and six feet of Softube hose. The booster pump is not self-priming, so it only must be in operation while your main circulation pump is running. Ultra-low flow requirements allow the Polaris PB4-60 Booster Pump to operate on the low-speed setting on a dual speed or variable speed pool pump. In addition, the Polaris PB4-60 uses a high efficiency 3/4 horsepower motor for affordable operation and energy savings. The Polaris PB4-60 Booster Pump is a great booster pump to provide your cleaner the pressure it needs to help keep the pool clean and free of debris. Common Questions : What size are the PB4-60 inlet and discharge ports? The inlet and discharge are 3/4 inch. What HP is the motor? The motor is 3/4 (0.75) HP. Does the Polaris PB4-60 come with the installation kit? Yes, the PB4-60 comes with the installation kit. The kit includes: 6′ soft tube hose and 4 connectors. What are the dimensions of the unit? The Polaris PB4-60 unit dimensions are 17″ x 15″ x 10. The weight of the item is 30.09 lbs. Pump gets hot and shuts off periodically. Ensure that there is adequate room around the motor to circulate air and keep the motor cool. Have a qualified electrician check for loose connections and check the voltage at the pump motor while it is in operation. If the voltage is not within 10%, contact a qualified electrician and/or the local power service provider. View more great items. Hayward Housing Pump SP1500 Series SPX1500AA. Hayward 2 HP Impeller for Super Pump SPX2615C. $1,859.00. Hayward W3S210T93S Pro Series Top-Mount 21 Sand Filter with 1-1/2HP Above. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “intheswimpoolsupplies” and is located in this country: US. This item can be shipped to United States.
  • Voltage: 115V / 230V
  • Item Width: 14.400
  • Item Height: 9.800
  • Item Length: 17.700
  • Amperage: 6.4/12.8
  • Manufacturer: Polaris
  • Manufacturer Warranty: 1 year
  • Product Type: Booster Pump
  • Horsepower: 3/4 HP
  • UPC: 738919006713
  • EAN: 0400534007832
  • Brand: Polaris
  • Minimum Pump Power Requirement: 0.75hp
  • Type: Booster Pump
  • Maximum Flow Rate: Single-Speed
  • Model: Polaris PB4-60
  • MPN: PB460, PB4-60
  • Suitable For: In Ground Pools

Main Access Smart Step 4 Step Entry for 48-54 Pool Walls, 200600T 200600IT

Main Access Smart Step 4 Step Entry for 48-54 Pool Walls, 200600T 200600IT

Main Access Smart Step – 4 Step Entry for 48″-54″ Pool Walls, 200600T. The 200600T has a 24 wide step to provide smooth transition into the pool while still maximizing the space in smaller pools. Main Access Smart Step – 4 Step Entry for 48″-54″ Pool Walls, 200600T 200600IT. View more great items. Inter-Fab G3DE049 Economy Figure-4 Grab Rail. 049 Tubing Wall Thickness. Vinyl Works Of Canada Above Ground Pool Deck Ladder White SLD-W. Main Access 200700T Smart Choice Above Ground Pool Ladder. Main Access 200200 Easy Incline Pool Deck Ladder White. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Ladders & Steps”. The seller is “intheswimpoolsupplies” and is located in this country: US. This item can be shipped to United States.
  • Color: Taupe
  • Product Type: Pool Ladder
  • UPC: 609788722311
  • EAN: 0744271358070
  • Brand: Main Access
  • Type: Steps
  • Shape: L-Shaped
  • Number of Steps: 4
  • MPN: 200600T
  • Suitable For: Above Ground Pools

3 Beautiful Florida Pool Homes Selling For Under 400 000 As Homes Price Continue To Fall