Tag Archives: pump

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

1.5/2/2.5HP INGROUND Swimming POOL PUMP MOTOR withStrainer Hayward Replacement

This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Note: Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. How to use 1. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight 3. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. The installation must be according to the normal power indicated on the label. The amperage must not at any time exceed the value indicated on the label It is recommended that you consult a state-registered electrician. Place the pump in a dry area with good ventilation. The ambient temperature must not exceed 40? The pumps are only suitable for counter-clockwise rotation when viewing from the pump end. Three phase motors can rotate in either direction. Interchanging any of the cables on a three-phase motor will reverse the rotation. Momentarily start, or bump the motor without water in the tank, to check the rotation of the pump shaft. Before disconnecting electrical connections, shut off electricity at its source. Newer work on pump without making certain the power is OFF. This appliance is not intended for use by persons, including children with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety Children should be supervised to ensure that they do not play with the appliance. Problem Description: 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water Solution: When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process, generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise, pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. 1.5HP&2.0HP 110-240V Swimming Pool Pump. 2.5HP 110V Swimming Pool Pump. Powerful Self-Priming IP55 2.5HP Electric Motor, low noise with quiet operation and no leak. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. Type : Pool Pump Dual voltage : 110-120V/220V-240V Power : 1100w Horsepower : 1.5 HP Speed : 3450 RPM Max. Flow : 6500 GPH Max. Temp : 104 Degree Fahrenheit (40 Degree Celsius) Frequency : 60HZ Qmax : 410 L/min Hmax : 15.5 Meter Power Cord : 59 Certification : CSA and ETL. Model : SPPE 250 Power : 1850W/2.5HP Voltage : 110V / 60Hz Max. Flow : 560 L/m IP55 INS CL. 50 C Amps : 6.8 Head : Max 19m / 62.34ft Capacitor : 25 F Inlet : 1.5″ Internal Outlet : 1.5″ Internal Pipe Compatibility : Fit 1.5 inch plumbing internally Noise Level. Weight : 10.2 kg / 22.5 lbs. Type : Pool Pump Dual voltage : 110-120V/220V-240V Power : 1500w Horsepower : 1.5 HP Speed : 3450 RPM Max. Swimming Pool Pump X 1. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. We have Five warehouses located in CA, TX, NY, NJ & GA. Some products may be dispatched in more than one carton. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “home01-equipment” and is located in this country: US. This item can be shipped to United States.
  • Size: 2.0HP 115-230V
  • Model: 1.5/2/2.5HP
  • Motor Shaft Material: Stainless Steel
  • Speed: Single-Speed
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1.5HP/2.5HP
  • Item Height: 11.4\
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • RPM: 3450/min
  • Power Cord: 59\
  • Item Width: 9.6\
  • Pool Type: In Ground &Above Ground
  • Warranty: Lifetime
  • Color: Black
  • Energy Star: A+++
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Type: Pool Pump
  • Installation: Universal Installation
  • Item Weight: 26lbs
  • Brand: SUPER-HYPRESS
  • Material: ABS,PVC, Stainless Steel, Copper
  • Power Source: Corded
  • Features: Easy Assembly, Easy Installation, Noise Vibration Reduction, Portable, Rust Resistant
  • Item Length: 22.4\
  • Suitable For: Above Ground Pools, Inflatable & Kid Pools, In Ground Pools
  • Certification: UL Certification
  • Qmax: 410 L/min
  • Hmax: 15.5 Meter
  • Horsepower: 1.5HP/2.5HP
  • Amper: 10.8/5.4A
  • Voltage: 110-120V/220V-240V

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

2640GPH 10 Sand Filter Above Ground Swimming Pool Pump intex compatible

250kpa max working pressure. 5 way dial valve including filtration, backwash, rinse, waste, closed. Corrosion-proof and UV-resistant body. Underdrain with side-slotted laterals draws water evenly across the full diameter of the sand bed for higher flow, better filtration, longer cycles and more efficient backwashing. Standard pump and film filter base, easy to install and service. Suitable for pools of all types and sizes. For swimming pools up to 5,000-9,000 gal. Note:Inlet/Outlet Fitting: 1-1/4″NPT (fits intex 1-1/4″ hose) & 1-1/2″ Outlet (can fit to Intex 1-1/4″ hose with adapter not included). Ffective filtration area :0.05? Required media type : #20 silica sand. Required media amount :10KG. Pump rated input power :250W/0.35HP. Pump strainer basket : No. Pump suction height : 0m. Pump max flow rate. System flow rate : 5.9m³/h. Pipe Size:1 1/2in. Package size :473139.5CM. 1 x Pool Pump. 5 way dial valve. 1.5in/1.25in filter connector hose. 1.5 in Pool Pump connectors. Pump and filter are perfectly engineered to provide optimum flow rates that promotes clean water quality. 5-Way multi port provides for easy use and quick backwashing. High efficiency pump lowers system cost and ensures years of quiet operation. Flow rate of 2640 Gallons Per Hour swimming pool pump works swiftly and efficiently. Machine will protect users’s safety entirely with build-in automatic thermal overload protector. Pump strainer basket is the largest in its class with an easy open, quick lock, transparent pump lid which mean less work and more swimming. Please contact our customer service team immediately if: 1. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “fansdealonline” and is located in this country: US. This item can be shipped to United States.
  • Cartridge Type: A/C
  • Compatible Brand: For Intex
  • Pool Type: Above-Ground
  • Item Length: 20in
  • Recommended Pool Volume: 5,000-9,000gal
  • Item Height: 24in
  • Material: Safety materials ,tank made of HDPE
  • System Flow Rate: 2640GPH
  • Voltage: 110-120V
  • Manufacturer Warranty: Lifetime
  • Tank Capacity: 14L
  • Water Type: All Water Types
  • Features: Easy Installation, Easy Assembly
  • UPC: 0192072016376
  • Brand: Summer Waves
  • Minimum Pump Power Requirement: 0.25hp
  • Type: Filter Pump
  • Maximum Flow Rate: Single-Speed
  • Model: P53ST1100
  • MPN: P53ST1100
  • Suitable For: Above Ground Pools

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V

The Polaris PB4-60 Booster Pump provides a dedicated supply of pressure to your pressure side pool cleaner that allows it to clean the pool effectively. For more than 20 years, Polaris booster pumps have been the benchmark for powerful Polaris cleaner performance. The Polaris PB4-60 Booster Pump is suitable for use with all pressure side pool cleaners that require the use of a booster pump. Polaris PB4-60 Booster Pump Attributes The Polaris PB4-60 Booster Pump for pressure side pool cleaners runs at 3/4 HP and 115/230V and draws 12.8/6.4 Amps respectively. The Polaris PB4-60 Booster Pump works with any automatic pressure side pool cleaner that requires the use of a booster pump. For best performance, combine the Polaris PB4-60 with pressure side pool cleaners such as the Polaris 280, 380. Polaris PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V. Polaris PB4-60 Booster Pump Attributes. The Polaris PB4-60 Booster Pump for pressure side pool cleaners runs at 3/4 HP and 115/230V and draws 12.8/6.4 Amps respectively. For best performance, combine the Polaris PB4-60 with pressure side pool cleaners such as the Polaris 280, 380, 3900 Sport, and the Kreepy Krauly Letro Legend. The Polaris PB4-60 comes ready for installation with four quick connect fittings and six feet of Softube hose. The booster pump is not self-priming, so it only must be in operation while your main circulation pump is running. Ultra-low flow requirements allow the Polaris PB4-60 Booster Pump to operate on the low-speed setting on a dual speed or variable speed pool pump. In addition, the Polaris PB4-60 uses a high efficiency 3/4 horsepower motor for affordable operation and energy savings. The Polaris PB4-60 Booster Pump is a great booster pump to provide your cleaner the pressure it needs to help keep the pool clean and free of debris. Common Questions : What size are the PB4-60 inlet and discharge ports? The inlet and discharge are 3/4 inch. What HP is the motor? The motor is 3/4 (0.75) HP. Does the Polaris PB4-60 come with the installation kit? Yes, the PB4-60 comes with the installation kit. The kit includes: 6′ soft tube hose and 4 connectors. What are the dimensions of the unit? The Polaris PB4-60 unit dimensions are 17″ x 15″ x 10. The weight of the item is 30.09 lbs. Pump gets hot and shuts off periodically. Ensure that there is adequate room around the motor to circulate air and keep the motor cool. Have a qualified electrician check for loose connections and check the voltage at the pump motor while it is in operation. If the voltage is not within 10%, contact a qualified electrician and/or the local power service provider. View more great items. Hayward Housing Pump SP1500 Series SPX1500AA. Hayward 2 HP Impeller for Super Pump SPX2615C. $1,859.00. Hayward W3S210T93S Pro Series Top-Mount 21 Sand Filter with 1-1/2HP Above. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “intheswimpoolsupplies” and is located in this country: US. This item can be shipped to United States.
  • Voltage: 115V / 230V
  • Item Width: 14.400
  • Item Height: 9.800
  • Item Length: 17.700
  • Amperage: 6.4/12.8
  • Manufacturer: Polaris
  • Manufacturer Warranty: 1 year
  • Product Type: Booster Pump
  • Horsepower: 3/4 HP
  • UPC: 738919006713
  • EAN: 0400534007832
  • Brand: Polaris
  • Minimum Pump Power Requirement: 0.75hp
  • Type: Booster Pump
  • Maximum Flow Rate: Single-Speed
  • Model: Polaris PB4-60
  • MPN: PB460, PB4-60
  • Suitable For: In Ground Pools

1/4 HP Submersible Swimming Pool Cover Pump with 33′ Power Cord, 1050 GPH

1/4 HP Submersible Swimming Pool Cover Pump with 33' Power Cord, 1050 GPH

1/4 HP Submersible Swimming Pool Cover Pump with 33' Power Cord, 1050 GPH

1/4 HP Submersible Swimming Pool Cover Pump with 33' Power Cord, 1050 GPH

1/4 HP Submersible Swimming Pool Cover Pump with 33' Power Cord, 1050 GPH

1/4 HP Submersible Swimming Pool Cover Pump with 33' Power Cord, 1050 GPH

1/4 HP Submersible Swimming Pool Cover Pump with 33' Power Cord, 1050 GPH

1/4 HP Submersible Swimming Pool Cover Pump with 33' Power Cord, 1050 GPH

1/4 HP Submersible Swimming Pool Cover Pump with 33' Power Cord, 1050 GPH

1/4 HP Submersible Swimming Pool Cover Pump with 33' Power Cord, 1050 GPH

1/4 HP Submersible Swimming Pool Cover Pump with 33' Power Cord, 1050 GPH

1/4 HP Submersible Swimming Pool Cover Pump with 33' Power Cord, 1050 GPH

1/4 HP Submersible Swimming Pool Cover Pump w/ 33′ Power Cord, 1050 GPH. Remove excess water for the pool cover or yard? 1/4 HP motor that pumps fast? 5 levels of adjustable water volume to meet your needs? Can be used submerged in water when in the highest gear? Wide strainer base to filter debris and prevent tipping? Convenient handle for an easy grip? Hose adapter to prevent pump tipping via hose? Is the pool cover covered in puddles again? This submersion sump pump offers you the outdoor dewatering solution for that and much more. Drain the pool, puddles in the garden, and ponds. Featuring a 1/4 horsepower (HP) motor capable of pumping out 1050 gallons of water per hour (GPH), set between 5 different gears and depths, with the highest allowing for full submersion. Including a protective filter to stop debris from causing damage, water isn’t a worry with Outsunny. Color: Black, Aqua Blue? Overall Dimensions: Dia 11.75″ x 11″ H? Max Water Volume: 1050 GPH (Gallons Per Hour)? Rated Voltage: 110V / 60HZ? Cable Wire Length: 39.25? Outlet Size: Dia 0.75″ – 1.5″? We are committed to offering our customers value-oriented items in Outdoor & Patio, Home Goods, Health & Beauty, Sporting Goods, Pet Supplies, Toys & Hobbies. We are always looking tobring new innovative items to our catalog so contact our Customer Service department with any suggestions you may have! Occasionally a warehouse is out of the product and the warehouse further from you will have to fulfill the order which could make the ETA up to 6 days. And you will be able to redirect your package(s). Aosom’s Cancellation Policy. For items that are defective or damaged, Aosom may require pictures to help us determine the appropriate next step, which may be replacement parts, or a replacement unit. In this day and age, we understand people’s time is valuable, so supplying pictures when you message us will help us assist you faster. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “mhcorp” and is located in this country: US. This item can be shipped to United States.
  • Brand: Outsunny
  • Color: Black
  • Type: Pool Cover Pump
  • Model: 845-734V80
  • Manufacture: Aosom LLC
  • Item Dimensions: 11.75\
  • Material: PP, Steel
  • Item Length: 11.75in
  • Item Width: 11.75in
  • Item Height: 11in
  • Colormap: black
  • Prop_Name: di_2_ethylhexyl_phthalate_dehp
  • Prop Type: chemical
  • MPN: US845-734V800141
  • UPC: 196393253649

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor with Strainer Filter Basket

This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water Solution. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process, generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise, pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. 1 x 1.5HP Dual voltage Swimming Pool Pump. 2 x 1-1/2NPT Connectors. UL Certification for motor, longer lasting than those without certification. High performance, energy saving motor with stainless steel shaft could stand wear and tear. High efficiency, low maintenance and reliability. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. All items are dispatched from our warehouse in Azusa, CA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “viphomesupply” and is located in this country: US. This item can be shipped to United States.
  • Amperage: 10.8/5.4A
  • Certification: CSA and ETL
  • I.CL.: 155(F)
  • Qmax: 410 L/min
  • Item Width: 9.6\
  • Hmax: 15.5 Meter
  • Horsepower: 1.5HP
  • Pumping Speed: 390-260L/MIN
  • Item Length: 22.4\
  • Amper: 10.8/5.4A
  • Motor Shaft Material: Stainless Steel
  • Speed: 3450 r/min
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1100W/1.5HP
  • Max Water Temperature: 50℃
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • RPM: 3450/min
  • Power Cord: 59\
  • Pool Type: In Ground &Above Ground
  • Warranty: Lifetime
  • Color: Black
  • Energy Star: A+++
  • CAP: 124-148 μF
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Internal Thread diameter: NPT 1.5\
  • External Thread diameter: G2.25\
  • Set Includes: Full Instructions, 1-1/2NPT Connectorsx2, Swimming Pool Pump
  • Manufacturer Warranty: Lifetime
  • Power Source: Battery, Corded
  • Item Height: 11.4 in
  • Brand: Not Found
  • Maximum Flow Rate: 1500 GPH
  • Minimum Pump Power Requirement: 1.5hp
  • Voltage: 220 V
  • Water Type: All Water Types
  • Features: Portable, Two-Speed, Single-Speed, Easy Installation, Variable Speed
  • Installation: Universal Installation
  • Material: ABS, Stainless Steel, Copper, PVC, Steel
  • Type: Pool Pump
  • Recommended Flow Rate: 1500 GPH
  • Model: Swimming Pool Pump
  • Power: 1100 W
  • Item Weight: 26 lb
  • UPC: 283961330595
  • MPN: 4AZY8007
  • Suitable For: Above Ground Pools

Pentair SuperFlo 1.5 Hp Variable Speed-Ground Pool Pump

Pentair SuperFlo 1.5 Hp Variable Speed-Ground Pool Pump

Pentair SuperFlo 1.5 Hp Variable Speed-Ground Pool Pump

Pentair SuperFlo 1.5 Hp Variable Speed-Ground Pool Pump

Pentair SuperFlo 1.5 Hp Variable Speed-Ground Pool Pump

Pentair SuperFlo 1.5 Hp Variable Speed-Ground Pool Pump. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “ada1022_kdqqnd7v” and is located in this country: US. This item can be shipped to United States.
  • Brand: Pentair
  • Pool Type: In-Ground
  • Type: Standard Pool Pump
  • Voltage: 115 V / 230 V
  • Model: SuperFlo
  • Features: Variable Speed
  • Item Length: 24.91
  • Suitable For: In Ground Pools

1.0/1.5/2.0 HP Swimming Pool Pump In/Above Ground with Strainer Basket ETL Listed

1.0/1.5/2.0 HP Swimming Pool Pump In/Above Ground with Strainer Basket ETL Listed

1.0/1.5/2.0 HP Swimming Pool Pump In/Above Ground with Strainer Basket ETL Listed

1.0/1.5/2.0 HP Swimming Pool Pump In/Above Ground with Strainer Basket ETL Listed

1.0/1.5/2.0 HP Swimming Pool Pump In/Above Ground with Strainer Basket ETL Listed

1.0/1.5/2.0 HP Swimming Pool Pump In/Above Ground with Strainer Basket ETL Listed

1.0/1.5/2.0 HP Swimming Pool Pump In/Above Ground with Strainer Basket ETL Listed

1.0/1.5/2.0 HP Swimming Pool Pump In/Above Ground with Strainer Basket ETL Listed

1.0/1.5/2.0 HP Swimming Pool Pump In/Above Ground with Strainer Basket ETL Listed

1.0/1.5/2.0 HP Swimming Pool Pump In/Above Ground with Strainer Basket ETL Listed

1.0/1.5/2.0 HP Swimming Pool Pump In/Above Ground with Strainer Basket ETL Listed

1.0/1.5/2.0 HP Swimming Pool Pump In/Above Ground w/ Strainer Basket ETL Listed. POWERFUL PUMP – Advanced engineering features an impeller that maximizes flow, minimizes noise, and self-primes in an energy-efficient manner; Pure stainless-steel motor provides not only an efficient, stable and safe running, but also long service life. STURDY CONSTRUCTION – The full body is constructed with commercial-grade reinforced thermoplastic that resists corrosion, ensuring superior strength and durability; Comply with ETL Safety Standard. DETAIL ORIENTED – The strainer is designed with an extra-large filter basket that is detachable for easy cleaning; See -through lid allows you a clear internal viewing; Built-in automatic thermal overload protector and airflow ventilation protects from overheating and damage; Note: Please fill the pump with water upon first use to prevent the motor from overheating. WIDE APPLICATIONS – Female thread and slip union connection for tool-free installation; Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation system, but should not to be used with storable pools; Package includes: 1 x pool pump; 2 x black interface, 1 x manual. High efficiency & Low Noise & Heavy Duty Construction & Powerful Motor. This swimming pool pump is made of a durable PP plastic shell and stainless motor that provides you with high-performance suction power and optimal flow. This pool pump runs very smoothly and is whisper quiet. Its airflow ventilation helps circulate water filtration and keeps your swimming pool clean and sanitary. Ideal for above-ground pools and spas in all types and sizes. High Water Output – The maximum flow rate can up to 5220 GPH / 8350 GPH / 6800 GPH that makes for more efficient and capable in pool cleaning. Transparent Pump Lid – A see-through cover with cam-lock lid for quick inspection and tool-free service. Overloaded Protection – Prevents from overcurrent running that would cause overheating of the equipment. Huge Prefilter – The Strainer basket with internal ribs can filter out the debris and leaves that greatly reduce the frequency of cleaning and maintenance. Product Specification of 1.5 hp. 48 mm/1.9 inch. 58 mm/2.3 inch. Length of 78.7 inches, American three-pin plug. Product Specification of 2.0 hp. 115V(In default) 230V. 48 mm/1.9 inches. 58 mm/2.3 inches. Length of 37.4 inches, American three-pin plug. Product Specification of 1.0hp. More Deatil of 1.0 / 1.5 hp. Ideal for use with swimming pools, hot tubs, thermal springs, spas, pond and irrigation system. Inner & Outer Thread Connector. Comes with 2 free 1.5 inch American standard internal thread connectors to help you set up with no hassle. Equipped with a drain plug on the bottom which is easy for drainage and avoids water accumulation during winter. Just revolve the stopper and pull it out. The strainer includes a large, easy-to-clean filter basket to filtrated dregs and keeps pool maintenance to a minimum. More Detail of 2.0 hp. Dual-Watt 12.5/6.25 Amp 2.0 HP self-priming pump delivers up to 113 GPM per minute, which meets your different demands. Voltage Change: The voltage can easily switch from 115V to 230V by setting the voltage regulating switch on the rear of the pump. & Public holiday excluded. We have multiple warehouses located at CA and NJ. We will surely take care for u. We are a company based on California. We devoted ourselves to offering high quality products at the most reasonable prices. We have several overseas warehouses, which will be distributed according to your location. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “3qmart-15″ and is located in this country: US. This item can be shipped to United States.
  • Size: 1.5HP – 8350 GPH – Above Ground Only
  • Material: PP plastic shel, stainless motor,
  • Type: Standard Pool Pump
  • Brand: Unbranded
  • Suitable For: Above Ground Pools, In Ground Pools
  • Energy Star: Compliant
  • Color: Black
  • Pool Type: In-Ground/ Above Ground
  • Speed: Single-Speed
  • Horsepower: 1hp, 1.5hp, 2.0hp

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

2.0HP Swimming Pool Filter Pump Motor withStrainer Generic In/Above Ground Hayward

For more information on our products. Please send message to us. InGround Swimming Pool Pump Motor w/ Strainer Generic Hayward Replacemen 2HP. What Customers Have To About Us. Just As It Says, Got here fast. Have not used yet. Can’t wait to use it. Item was received quickly and was exactly as described. THANKS to a great Ebayer. “5++ Stars the product works wonders”. Extremely professional, takes care of cust. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process, generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise, pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. 104 Degree Fahrenheit (40 Degree Celsius). 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. 25 years Industry Experience. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “happystore-01″ and is located in this country: US. This item can be shipped to United States.
  • Brand: HAPPYSTORE
  • Type: Pool Pump
  • Voltage: 110-120V/220V-240V
  • Pool Type: In Ground &Above Ground
  • Motor Shaft Material: Stainless Steel
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1500W/2HP
  • Color: Black
  • RPM: 3450/min
  • Horsepower: 2.0HP
  • Speed: Single-Speed
  • Qmax: 430 L/min
  • Hmax: 17Meter
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Max. Temp: 122 Degree Fahrenheit (50 Degree Celsius)
  • Power Cord: 59\
  • Certification: UL Certification
  • Features: Easy Assembly, Easy Installation, Rust Resistant, Single-Speed
  • Suitable For: Above Ground Pools, Inflatable & Kid Pools, In Ground Pools
  • Power Source: Corded
  • Manufacturer Warranty: Lifetime
  • Power: 1500 W
  • Installation: Universal Installation
  • Water Type: All Water Types
  • Item Width: 9.6\
  • Recommended Flow Rate: 1500 GPH
  • Item Length: 22.4\
  • Item Height: 11.4\
  • Labels & Certifications: CE-Approved, UL Certification
  • Material: ABS, Copper, PVC, Stainless Steel
  • Item Weight: 26lbs
  • Energy Star: A+++
  • Amperage: 12.3/6.1A
  • Maximum Head Lift: 17 Meter
  • Model: 2.0HP
  • Set Includes: Fittings, Full Instructions
  • UPC: 283961330595

TECSPACE 2.0 HP 115V-230V 1500W Pool Pump In/Above Ground Swimming Pool Pump

TECSPACE 2.0 HP 115V-230V 1500W Pool Pump In/Above Ground Swimming Pool Pump

TECSPACE 2.0 HP 115V-230V 1500W Pool Pump In/Above Ground Swimming Pool Pump

TECSPACE 2.0 HP 115V-230V 1500W Pool Pump In/Above Ground Swimming Pool Pump

TECSPACE 2.0 HP 115V-230V 1500W Pool Pump In/Above Ground Swimming Pool Pump

TECSPACE 2.0 HP 115V-230V 1500W Pool Pump In/Above Ground Swimming Pool Pump

TECSPACE 2.0 HP 115V-230V 1500W Pool Pump In/Above Ground Swimming Pool Pump

TECSPACE 2.0 HP 115V-230V 1500W Pool Pump In/Above Ground Swimming Pool Pump

TECSPACE 2.0 HP 115V-230V 1500W Pool Pump In/Above Ground Swimming Pool Pump

TECSPACE 2.0 HP 115V-230V 1500W Pool Pump In/Above Ground Swimming Pool Pump

TECSPACE 2.0 HP 115V-230V 1500W Pool Pump In/Above Ground Swimming Pool Pump

- The full body and the impeller are precisely designed on the basis of hydraulics. Theory, unique constructions, powerful motor, large flow, high lift. Especially the advanced impeller, not only can it maximize the flow, but also it can minimizes the noise and operates itself on an energy-efficient way. Class F insulation, the running temperature of the pure stainless-steel motor is lower. Equipped with automatic thermal overload protector to ensure the sustained operation. Even under conditions of waterless rotation or the stopped impeller, It also can prevents the motor from being burned and guarantees the security of people. NO LEAKAGE & EASY TO CLEAN? – The function of the high density sealed design is reliable and safe. Even in the process of the continuous cycle, the seal state of the pump can keeps stable for a long time to avoid leaking. The strainer is designed with a huge filter basket that can be removed and easy to clean. The elevated pump base to keep water pump off water or moist working environment. A filter basket that protect the machine from being damaged by particles. The voltage can be easily changed just by setting the regulating switch on the back of the pool pump. Equipped with a powerful motor to ensure high speed operation, quick circulation and make the pump run on an energy-efficient way. A huge filter basket that protect the machine from being damaged by particles, which greatly reduce the frequency of cleaning and maintenance. Stable Performance & Long Service Life : commercial grade enhanced thermoplastic can resist the damage of chemical substances in the swimming pool. Overheat Protector & Keep You Safe :Equipped with automatic thermal overload protector, even under conditions of waterless rotation, It also can prevents the motor from being burned. Easy Cleaning & Maintenance :A huge filter basket that protect the machine from being damaged by particles, greatly reducing the frequency of cleaning and maintenance. Max flow: 6811.2 GPH. Flow rate: 113.5 GPM. Max head: 55.8 FT. Pipe Size: 1-1/2 IN. Thread diameter: 1.5 IN. Nozzle internal diameter: 48 mm/1.9 inches. Nozzle External diameter: 58 mm/2.3 inches. Power Cord: length of 37.4 inches, American three-pin plug. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “tecspace” and is located in this country: US. This item can be shipped to United States.
  • Model: 2.0 HP
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Power Source: Corded
  • Type: Pool Pump
  • Features: Dual Voltage Transfer, Powerful Motor, Huge Filter Basket
  • Minimum Pump Power Requirement: 2.0 HP
  • Power: 1500 W
  • Set Includes: Swimming Pool Pump, Fittings, Full Instructions
  • Brand: TECSPACE
  • Manufacturer Warranty: 18 Months
  • Suitable For: Above Ground Pools, In Ground Pools
  • Maximum Flow Rate: 6811.2 GPH
  • Voltage: 115V-230V

1.5HP Swimming Pool Pump Variable Speed Digital LCD Above Ground Pool With Fitting

1.5HP Swimming Pool Pump Variable Speed Digital LCD Above Ground Pool With Fitting

1.5HP Swimming Pool Pump Variable Speed Digital LCD Above Ground Pool With Fitting

1.5HP Swimming Pool Pump Variable Speed Digital LCD Above Ground Pool With Fitting

1.5HP Swimming Pool Pump Variable Speed Digital LCD Above Ground Pool With Fitting

1.5HP Swimming Pool Pump Variable Speed Digital LCD Above Ground Pool W/ Fitting. XtremepowerUS Variable Speed Pump now offers a fully variable speed pump at an affordable price. The motor delivers premium energy efficiency and programs flexibility with a digital controller mounted directly onto the pump. The Variable Speed Pump can save you up to 80% in energy costs over single-speed pumps. It also has faster payback than the more expensive variable speed pumps because it is sized to match the performance of the most common medium heat pumps. Running your pump at lower speeds for longer periods of time will cost you less in operational costs than running your pump at a high speed for shorter periods of time. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Fully programmable, self-contained 24-hour time clock, with custom speeds and timer functions, which allows it to manage flow throughout the day. Easy start-up fill the pump with water upon first use to prevent the motor from overheating. High-Efficiency Impeller maximize flow and reduce noise while the energy-efficient motor with a commercial-grade frame. Thermally protected motor for greater protection and longevity. Intended for use with swimming pools, hot tubs, and spas. Material: PPGF30 + PC. # of Speed: 3. Rated Power: Eco (1,500RPM), Clean (2,400RPM), Boost (3,250RPM). Inlet Internal Fitting: 1.5 NPT. When installing, please consult qualified professional. Durapower is one of the largest professional importer hand, power tools, home and garden in the market, serving the industrial, vehicle service and assembly, electronics, construction and serious DIY markets. Add to Favorite Sellers. Sign up to Newsletter. View more great items. XtremepowerUS Water Pressure Gauge Bottom Thread 2″ Dial 1/4″NPT Well Spa Pump. 19 Swimming Pool Sand Filter w/ Port Valve Inground Pond Fountain System. XtremepowerUS Above-Ground Swimming Pool 16 Sand Filter 3100GPH. 19 Sand Filter Above Ground Swimming Pool Pump 4500GPH 1.5HP Pump with Stand. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “durapowers” and is located in this country: US. This item can be shipped to United States.
  • Brand: XtremepowerUS
  • Type: Swimming Pool Pump
  • Features: Timer Setting, Variable Speed Pump
  • Suitable For: Indoor, Outdoor
  • Voltage: 115
  • Power Source: electric
  • Model: 1.5HP Variable Swimming Pool Pump
  • Item Height: 10
  • Item Width: 10.25
  • Material: Metal, PPGF30
  • Item Length: 24.25
  • Installation: none
  • Set Includes: Manual
  • Color: Beige
  • Frame Material: PPGF30
  • eBay Durapower Store Category: Pool