Tag Archives: motor

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer

Better price, Top Quality, expert Service support. Live demo of multiple products. Owned and operated company. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Internal Thread diameter : NPT 1.5. External Thread diameter : G2.25. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). 2.0HP Dual voltage Swimming Pool Pump X 1. All items are dispatched from our warehouse in CANJAL. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. We never want our customers to wait for parts, we have plenty of parts available for every product. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “Hayward 2HP Swimming Pool Pump Above Ground Pool Filter Pump Motor Strainer” is in sale since Saturday, July 17, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “best-homepro” and is located in CA & NY. This item can be shipped to United States.
  • Brand: BEST-HOMEPRO
  • Type: Pool Pump
  • Voltage: 110-120V/220V-240V
  • Pool Type: In Ground &Above Ground
  • Motor Shaft Material: Stainless Steel
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1500W/2HP
  • Color: Black
  • RPM: 3450/min
  • Horsepower: 2.0HP
  • Speed: Single-Speed
  • Qmax: 430 L/min
  • Hmax: 17Meter
  • Frequency: 60HZ
  • Max. Flow: 6800 GPH
  • Max. Temp: 122 Degree Fahrenheit (50 Degree Celsius)
  • Power Cord: 59″
  • Certification: UL Certification
  • Features: Easy Assembly
  • Suitable For: Above Ground Pools
  • Power Source: Corded
  • Manufacturer Warranty: Lifetime
  • Power: 1500 W
  • Installation: Universal Installation
  • Water Type: All Water Types
  • Item Width: 9.6″
  • Recommended Flow Rate: 1500 GPH
  • Item Length: 22.4″
  • Item Height: 11.4″
  • Labels & Certifications: CE-Approved
  • Material: ABS
  • Item Weight: 26lbs
  • Energy Star: A+++
  • Amperage: 12.3/6.1A
  • Maximum Head Lift: 17 Meter
  • Model: 2.0HP
  • Set Includes: Fittings, Full Instructions
  • Maximum Flow Rate: 113 Gallons Per Minute
  • Item Dimensions LxWxH: 22.4 x 9.8 x 11.4 inches
  • Internal Thread diameter: NPT 1.5″
  • External Thread diameter: G2.25″

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 2.0 HP. Temp : 122 Degree Fahrenheit (50 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 2.0HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that¡¯s why our customers keep coming back. The item “2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo” is in sale since Sunday, July 11, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “vipshopmarket” and is located in Westbury, New York. This item can be shipped to United States.
  • Model: 2.0HP
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Max. Temp: 122 Degree Fahrenheit (50 Degree Celsius)
  • Power Cord: 59″
  • Item Height: 11.4″
  • Certification: UL Certification
  • Pool Type: In Ground &Above Ground
  • Motor Shaft Material: Stainless Steel
  • Item Width: 9.6″
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1500W/2HP
  • Color: Black
  • Energy Star: A+++
  • Type: Pool Pump
  • Installation: Universal Installation
  • Item Weight: 26lbs
  • Brand: VIPSHOPMARKET
  • Manufacturer Warranty: Lifetime
  • Amperage: 12.3/6.1A
  • Water Type: All Water Types
  • Material: ABS
  • Maximum Head Lift: 17 Meter
  • Power Source: Corded
  • Features: Single-Speed
  • Item Length: 22.4″
  • Power: 1500 W
  • Set Includes: Fittings, Full Instructions
  • Recommended Flow Rate: 1500 GPH
  • Suitable For: Above Ground Pools
  • Labels & Certifications: UL Certification
  • RPM: 3450/min
  • Horsepower: 2.0HP
  • Speed: Single-Speed
  • Qmax: 430 L/min
  • Hmax: 17Meter
  • Voltage: 110-120V/220V-240V

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground

Better price, Top Quality, expert Service support. Live demo of multiple products. Owned and operated company. Maintain a crystal clear and sparkling pool or spa that everybody loves with the new SPPE series self-priming 1850W electric swimming pool pump. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. The installation must be according to the normal power indicated on the label. The amperage must not at any time exceed the value indicated on the label. It is recommended that you consult a state-registered electrician. Place the pump in a dry area with good ventilation. The ambient temperature must not exceed 40. The pumps are only suitable for counter-clockwise rotation when viewing from the pump end. Three phase motors can rotate in either direction. Interchanging any of the cables on a three-phase motor will reverse the rotation. Momentarily start, or bump the motor without water in the tank, to check the rotation of the pump shaft. Before disconnecting electrical connections, shut off electricity at its source. Newer work on pump without making certain the power is OFF. This appliance is not intended for use by persons, including children with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Voltage : 110V / 60Hz. Head : Max 19m / 62.34ft. Thread diameter : G2.25. Diameter of white connector : 48.5mm/54.5mm. Pipe Compatibility : Fit 1.5 inch plumbing internally. Weight : 10.2 kg / 22.5 lbs. Powerful Self-Priming IP55 2.5HP Electric Motor, low noise with quiet operation and no leak. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. SPPE250 Swimming Pool Pump X 1. White Connector X 2. User’s Manual X 1. All items are dispatched from our warehouse in CANJAL. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. We never want our customers to wait for parts, we have plenty of parts available for every product. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “2.5HP In-Ground Swimming Pool Spa Pump Hayward Spa Motor Strainer Above Ground” is in sale since Tuesday, March 2, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “best-homepro” and is located in CA & NY. This item can be shipped to United States.
  • Features: Easy Assembly
  • Manufacturer Warranty: Lifetime
  • Amperage: 16 A
  • Certification: UL Certification
  • Qmax: 560 L/min
  • Item Width: 6.9″
  • Hmax: 21 Meter
  • Installation: Universal Installation
  • Voltage: 110 V
  • Horsepower: 2.5HP
  • Item Length: 22.4″
  • Item Height: 12.2″
  • Amper: 16A
  • Motor Shaft Material: Stainless Steel
  • Suitable For: Above Ground Pools
  • Power Source: Corded
  • Material: ABS,PVC, Stainless Steel, Copper
  • Speed: Single-Speed
  • Model: 2.5HP 110v
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1850W/2.5HP
  • Item Weight: 30 lb
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Water Type: All Water Types
  • Power: 1850w
  • Power Cord: 59″
  • Pool Type: In Ground &Above Ground
  • Maximum Flow Rate: 560 L/min
  • Brand: BEST-HOMEPRO
  • Warranty: Lifetime
  • Color: Black
  • Energy Star: A+++
  • Set Includes: Fittings
  • Frequency: 60HZ
  • Max. Flow: 560 L/min
  • Type: Pool Pump
  • Max Water Temperature:: 50
  • IPX5 CAP: 60F/250V AC
  • Overall Dimension: 23.6″*11.8″*8.7″
  • Thread diameter: G2.25″

1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115v Above GROUND Swimming POOL PUMP MOTOR w/ Strainer, High-Flo, Hi-Rate Inground 1.5” pipe size. Powerful pump for above ground pools. High flow rate makes it more efficient and capable in pool cleaning. A see-thru cover with cam-lock lid quick inspect and tool-free service. The strainer basket with internal ribs assure flow when filled with leaves and debris. High-tech motor with qualified material provide with cooler running and longer life. Stainless Steel 316 spring applicable for sea water and fresh water. High-precision Stainless Steel shaft reduce noise to 60 dB. Convenient drain plug makes winter maintenance easy. High durability with corrosion proof polymer. Compatible with DE, sand, and cartridge filter. Self-priming for Above-ground functionality. ETL Certificate, UL Certificate for motor. Totally Enclosed Fan Cooled. 1.5in NPT Swimming Pool PUMP. Pipe size(NPT)1.5. ABS, Copper, Stainless Steel. 1X Pool pump 1X 79inch/2m Power Cord w/US plug 1X Manual 1X Retail package. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Monday, November 18, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States.
  • Water Type: All Water Types
  • Horsepower: 1hp
  • Weight: 28LB
  • Frequency: 60hz
  • RPM: 3450
  • Noise Level: 60dB
  • Max. Temperature: 140
  • Material: ABS
  • Energy Star: A+++
  • Maximum Head Lift: 43ft
  • Installation: Universal Installation
  • Features: Chlorine Resistant
  • Power: 1000W
  • Set Includes: Pool PUMP
  • Brand: iMeshbean
  • Manufacturer Warranty: Lifetime
  • Amperage: 12 A
  • Speed: Single-Speed
  • Maximum Flow Rate: 5280GPH
  • Plug type: US plug
  • GPH: 5280
  • Labels & Certifications: ETL certificate
  • Hmax: 43ft/13m
  • Package size: 58x24x30.5cm/23×9.4×12 inch
  • Pipe size: 1.5”
  • Power cord length: 79”/2m
  • Amps: 12
  • Pool Type: Above-Ground
  • Voltage: 110-120V
  • Power Source: Battery
  • MPN: 2040700300
  • Suitable For: Above Ground Pools
  • Type: Filter Pump

500W DC Solar Pump In-Ground Swimming Pool Pump Clean Spa Brushless Motor 66GPM

500W DC Solar Pump In-Ground Swimming Pool Pump Clean Spa Brushless Motor 66GPM

500W DC Solar Pump In-Ground Swimming Pool Pump Clean Spa Brushless Motor 66GPM

500W DC Solar Pump In-Ground Swimming Pool Pump Clean Spa Brushless Motor 66GPM

500W DC Solar Pump In-Ground Swimming Pool Pump Clean Spa Brushless Motor 66GPM

500W DC Solar Pump In-Ground Swimming Pool Pump Clean Spa Brushless Motor 66GPM

500W DC Solar Pump In-Ground Swimming Pool Pump Clean Spa Brushless Motor 66GPM

500W DC Solar Pump In-Ground Swimming Pool Pump Clean Spa Brushless Motor 66GPM

500W DC Solar Pump In-Ground Swimming Pool Pump Clean Spa Brushless Motor 66GPM

500W DC Solar Pump In-Ground Swimming Pool Pump Clean Spa Brushless Motor 66GPM

500W DC Solar Pump In-Ground Swimming Pool Pump Clean Spa Brushless Motor 66GPM

Clean Water Pool Pump with MPPT Controller. This pump is ideal for pool pumping, cleaning, hot water circulation etc. Sometimes people use it for increasing the water pressure in the pipe, garden sprinkling, and irrigation. It only needs solar off grid power to get work! Meters and suction up to 8 meters. This pump is simple to install and easy to use. No need of sophisticated knowledge of pumping but just a little imagination of how much you can do with it. It will pump up the water in no time. The Pool Pump is vital in maintaining a clean sys. With its in-built filtration basket designed to capture and prevent fine debris from entering the pump, the Pool Pump will keep your swimming pool water constantly clear. Lso removable for easy cleaning while the transparent twist-on cover allows you to monitor the filtration easily. A smart pump controlle. Great specifications and features that make it perfect. Everything is made easy where it automatically switches your pump on/off on open/closing of any tap. It comes with a LED screen showing the live RPM, current, voltage, etc. It provides stable performance, requires low maintenance and is long lasting; it is one of the few that will exceed your expectations. Ol Pump is a must for anyone who values a crystal-clear pool at all times. Suitable for both in-ground and above-ground pools. Just need solar panels to get work. Transparent twist on cover. Free installation parts in package. Rated power: 500W / 0.67HP. Pump rate: 15,000L/H or 66GPM. Max Suction: 8m / 26ft. Temperature of water handled: 35 degree Celsius. Inner & outer diameter: 2inch / 51mm. Length of cable: 2m / 6.6ft. Product size: 231216 inch. What We Get For You (Package Include). 1 x Swimming pool solar pump with. 1 x Pump controller with MPPT function. 1 x Splice kit for cable join. 1 x Splice kit for waterproof. What You Need To Get By Yourself (Package DO NOT Include). Suitable solar panels. Therere some suggestions in the instruction book. A stainless steel wire (called safety cable) to hold the pump in the bore. If pumping water from the dam or river, a float set up required. A poly pipe from the pump to the water tank. Wire power cable (3 wires no earth). We recommend cable size at least thicker than the original cable in the pump. We have 2 warehouses, one in Huston, Texas, USA , another in Shanghai, China. Under normal conditions. We regret that our warehouse is not accessible to the public. As such, we do not offer a pick-up option. Some products may be dispatched in more than one carton. Please contact our customer service team immediately. The item must be in the original package and new condition, uninstalled or unpacked. Item is damaged in transit. Item is lost in transit. Or Resend a new one after the item is back. Customer change the mind. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. The item “500W DC Solar Pump In-Ground Swimming Pool Pump Clean Spa Brushless Motor 66GPM” is in sale since Thursday, August 30, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Water Pumps & Kits”. The seller is “wbssolar” and is located in Shanghai. This item can be shipped worldwide.
  • Model: DLP15-14-48/500
  • Max Head: 46 feet
  • VOC Range: 30V-96V
  • Custom Bundle: No
  • Modified Item: No
  • Pump Type: Surface Pool Pump
  • Non-Domestic Product: No
  • Pump Cable: 2m
  • Max Suction head lift: 8m
  • Style: Modern
  • Max Flow: 66 GPM
  • Type: Surface Swimming Pool Pump
  • Color: Black
  • Maximum Water Head: 14 meters
  • MPN: Does Not Apply
  • Recommended Environment: Indoor/Outdoor
  • Water Source: Swimming Pool Pump
  • Brand: Unbranded
  • Application: Agriculture/Farming
  • Connector Type: MC4
  • Country/Region of Manufacture: China
  • Wattage: 500W
  • Current Type: DC
  • System Configuration: Off-Grid
  • Maximum Input Voltage: 100V
  • Power Source: Solar Powered
  • Features: Brushless, With Controller
  • Protection Properties: Low Voltage Protection
  • Power: 501-600 W
  • Charging Mode: MPPT (Maximum Power Point Tracking)
  • Voltage: 48V

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that¡¯s why our customers keep coming back. The item “1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Wednesday, December 30, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “vipshopmarket” and is located in Westbury, New York. This item can be shipped to United States.
  • Certification: UL Certification
  • Warranty: Lifetime Warranty
  • Pool Type: In Ground &Above Ground
  • Motor Shaft Material: Stainless Steel
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1100W/1.5HP
  • Color: Black
  • Amper: 10.8/5.4A
  • RPM: 3450RPM
  • Horsepower: 1.5HP
  • Speed: Single-Speed
  • Qmax: 410 L/min
  • Type: Pool Pump
  • Installation: Universal Installation
  • MPN: 1.5HP
  • Brand: VIPSHOPMARKET
  • Material: ABS
  • Power Source: Corded
  • Features: Two-Speed
  • Suitable For: Above Ground Pools
  • Hmax: 15.5 Meter
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Power Cord: 59″
  • Voltage: 110-120V/220V-240V

A. O. Smith USQ1102 1 Hp Swimming Pool/Spa Replacement Motor Hayward (Open Box)

A. O. Smith USQ1102 1 Hp Swimming Pool/Spa Replacement Motor Hayward (Open Box)

A. O. Smith USQ1102 1 Hp Swimming Pool/Spa Replacement Motor Hayward (Open Box)

A. O. Smith USQ1102 1 Hp Swimming Pool/Spa Replacement Motor Hayward (Open Box)

A. O. Smith USQ1102 1 Hp Swimming Pool/Spa Replacement Motor Hayward (Open Box)

A. O. Smith USQ1102 1 Hp Swimming Pool/Spa Replacement Motor Hayward (Open Box)

1000s of Everyday Products. Vehicle Parts & Accessories. Sign up to receive special insider notifications of our latest deals, promotions, and new listings! Smith USQ1102 1 Hp Swimming Pool/Spa Replacement Motor Hayward (Open Box). This item’s box is slightly damaged, but the item itself is in very good condition! O Smith USQ1102 Replacement 1 Hp Motor for Hayward Swimming Pool/Spa Pump. Other with “square Flange” Bolt Pattern. Product Condition: Open Box. Questions about this item? Cancelling Your Order: Your order is important to us and will be processed immediately. Select the reason for the return. We welcome your inquiry! Sign Up for Our. The item “A. O. Smith USQ1102 1 Hp Swimming Pool/Spa Replacement Motor Hayward (Open Box)” is in sale since Friday, November 20, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “spreetail-deals” and is located in Lincoln, Nebraska. This item can be shipped to United States.
  • Brand: A.O. Smith
  • Horsepower: 1%20HP
  • Pool Type: In-Ground
  • Speed: Single-Speed
  • Suitable For: In Ground Pools
  • MPN: USQ1102
  • Type: Standard Pool Pump

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

Stainless Steel 316 spring applicable for sea water and fresh water. EPDM O-ring provide with high resistance and avoid leakage. Wide voltage design applies to voltage range from 110v to 240v. Bulit-in thermal protector assure long motor lifetime. High-precision Stainless Steel shaft reduce noise to 60 dB. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. Totally Enclosed Fan Cooled. 1.5 HP In-Ground Pump. Compatible with PL30-6 Filter Tank. Self-priming for in-ground functionality. Can be installed as 110V-120V or 220V-240V. Drain plug for easy winterizing. High durability with corrosion proof polymer. Fittings connections: 1 1/2 inch. 5400 GPH MAX Flow Rate:6000GPH. ETL Certificate, UL Certificate for motor. Package included 1xpool pump. The pool pump features a powerful and super-efficient IP55 1200w 1.5HP electric motor. The in-ground pool pump adopts a pure copper motor to achieve stable performance and ensure a long lifespan. The swimming pool pump is designed with an efficient impeller to provide high flow up and high head. Speed Flow:6000GPH; Max. The 1.5HP pool pump has a detachable filter basket to ensure the debris does not enter the pump to extend its service life. The see-through lid allows you a clear internal viewing. Dual voltage with switch design allows more easily installing and voltage changing. A see-thru cover with cam-lock lid for quick inspect and tool-free service. The swimming pool pump is perfect for swimming pools, hot tubs, thermal springs, SPA, and irrigation systems. It can keep you maintaining a crystal clear and sparkling pool. (No service on Weekend and public holidays). All return products should be in brand new state with all accessories included. Reliable performance with 304 grade stainless steel motor shaft. 2 HP In-Ground Pump. Can be installed as 110V or 220V. Amps 18.6/9.3. 5520 GPH MAX Flow Rate:6500. The pool pump features a powerful and super-efficient IP55 1500w 2HP electric motor. Speed Flow: 6500 GPH; Max. Head Lift: 79 ft. The 2HP pool pump has a detachable filter basket to ensure the debris does not enter the pump to extend its service life. The item “1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Monday, July 29, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States.
  • Water Type: All Water Types
  • Noise Level: 60dB
  • Item Height: 13 in
  • Item Width: 9 in
  • Material: ABS
  • Energy Star: A+++
  • Maximum Head Lift: 72FT
  • Power Source: Wring
  • Type: Filter Pump
  • Installation: Universal Installation
  • Features: Double Voltage
  • Item Length: 26 in
  • Item Weight: 37.5lb
  • Power: 1200W
  • Set Includes: Pool Pump
  • Brand: iMeshbean
  • Manufacturer Warranty: Lifetime
  • Amperage: 15/7.5 A
  • Suitable For: Above Ground Pools
  • Maximum Flow Rate: 5400 GPH
  • Labels & Certifications: ETL
  • Horsepower: 1.5HP
  • Speed: Single-Speed
  • RPM: 3450
  • Pool Type: In-Ground/Above ground
  • Max. Temperature: 140
  • Voltage: 110V-120V/220V-240V

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket

Better price, Top Quality, expert Service support. Live demo of multiple products. Owned and operated company. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor. 3, There is Water in The Pump. Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Internal Thread diameter : NPT 1.5. External Thread diameter : G2.25. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. Brand new for inground and aboveground. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). 1.5HP Dual voltage Swimming Pool Pump X 1. All items are dispatched from our warehouse in CANJAL. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. We never want our customers to wait for parts, we have plenty of parts available for every product. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “1.5HP Hayward Swimming Pool Pump Motor In/Above Ground with Strainer Filter Basket” is in sale since Tuesday, December 22, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “best-homepro” and is located in Lawrenceville, Georgia. This item can be shipped to United States.
  • Features: Easy Installation
  • Amperage: 10.8/5.4A
  • Certification: CSA and ETL
  • I.CL.: 155(F)
  • MPN: 2040700300
  • Qmax: 410 L/min
  • Item Width: 9.6″
  • Hmax: 15.5 Meter
  • Installation: Universal Installation
  • Voltage: 110-120V/220V-240V
  • Horsepower: 1.5HP
  • Pumping Speed: 390-260L/MIN
  • Item Length: 22.4″
  • Item Height: 11.4″
  • Amper: 10.8/5.4A
  • Motor Shaft Material: Stainless Steel
  • Suitable For: Above Ground Pools
  • Power Source: Corded
  • Material: ABS
  • Speed: 3450 r/min
  • Model: 1.5HP
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1100W/1.5HP
  • Item Weight: 26lbs
  • Max Water Temperature: 50
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Power: 1100 W
  • RPM: 3450/min
  • Power Cord: 59″
  • Pool Type: In Ground &Above Ground
  • Brand: VEVOR
  • Warranty: Lifetime
  • Color: Black
  • Energy Star: A+++
  • CAP: 124-148 F
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Type: Filter Pump
  • Internal Thread diameter: NPT 1.5″
  • External Thread diameter: G2.25″
  • Set Includes: Full Instructions
  • Manufacturer Warranty: Lifetime
  • Water Type: All Water Types

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo

This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Internal Thread diameter : NPT 1.5. External Thread diameter : G2.25. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. 2 x 1-1/2NPT Connectors. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. The item “Hayward 1.5HP Swimming Pool Pump Motor Strainer With Cord In/Above Ground Hi-Flo” is in sale since Thursday, June 24, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “happy-shopping01″ and is located in Cranbury, New Jersey. This item can be shipped to United States.
  • Brand: HAPPY-SHOPPING01
  • Type: Pool Pump
  • Voltage: 110-120V/220V-240V
  • Pool Type: In Ground &Above Ground
  • Motor Shaft Material: Stainless Steel
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1100W/1.5HP
  • Color: Black
  • Amper: 10.8/5.4A
  • RPM: 3450/min
  • Horsepower: 1.5HP
  • Speed: Single-Speed
  • Qmax: 410 L/min
  • Hmax: 15.5 Meter
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Power Cord: 59″
  • Certification: UL Certification
  • Warranty: Lifetime
  • Material: ABS,PVC, Stainless Steel, Copper
  • Model: 1.5HP
  • Item Height: 11.4″
  • Item Length: 22.4″
  • Item Width: 9.6″
  • Item Weight: 26lbs
  • Installation: Universal Installation
  • Size: 22.4″x11.4″x9.6″
  • Suitable For: Above Ground Pools
  • Tank Lining Material: Metal
  • Energy Star: No complaint
  • Features: Easy Assembly
  • MPN: 2040700300
  • Amperage: 10.8/5.4A
  • Set Includes: Full Instructions
  • Manufacturer Warranty: Lifetime
  • Power: 1100W
  • Power Source: Corded
  • Internal Thread diameter: NPT 1.5″
  • External Thread diameter: G2.25″
  • Water Type: All Water Types