Tag Archives: strainer

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US

Better price, Top Quality, expert Service support. Live demo of multiple products. Owned and operated company. Maintain a crystal clear and sparkling pool or spa that everybody loves with the new SPPE series self-priming 1850W electric swimming pool pump. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. The installation must be according to the normal power indicated on the label. The amperage must not at any time exceed the value indicated on the label. It is recommended that you consult a state-registered electrician. Place the pump in a dry area with good ventilation. The ambient temperature must not exceed 40? The pumps are only suitable for counter-clockwise rotation when viewing from the pump end. Three phase motors can rotate in either direction. Interchanging any of the cables on a three-phase motor will reverse the rotation. Momentarily start, or bump the motor without water in the tank, to check the rotation of the pump shaft. Before disconnecting electrical connections, shut off electricity at its source. Newer work on pump without making certain the power is OFF. This appliance is not intended for use by persons, including children with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Voltage : 110V / 60Hz. Head : Max 19m / 62.34ft. Inlet : 1.5 Internal. Outlet : 1.5 Internal. Pipe Compatibility : Fit 1.5 inch plumbing internally. Weight : 10.2 kg / 22.5 lbs. Powerful Self-Priming IP55 2.5HP Electric Motor, low noise with quiet operation and no leak. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. SPPE250 Swimming Pool Pump X 1. User’s Manual X 1. All items are dispatched from our warehouse in CANJAL. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. We never want our customers to wait for parts, we have plenty of parts available for every product. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US” is in sale since Monday, May 17, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “best-homepro” and is located in CA & NY. This item can be shipped to United States.
  • Model: 2.5HP 110V
  • Amper: 16A
  • Motor Shaft Material: Stainless Steel
  • Size: 22.4″x6.9″x12.2″
  • Speed: Single-Speed
  • Item Height: 12.2″
  • Outlet: 1.5″ Internal
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1850W/2.5HP
  • Item Width: 6.9″
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Noise Level: <65dB
  • Capacitor: 25 F
  • Energy Star: A+++
  • Power Cord: 59″
  • Pool Type: In Ground &Above Ground
  • Warranty: Lifetime
  • Color: Black
  • Frequency: 60HZ
  • Max. Flow: 560 L/min
  • Pipe Compatibility: Fit 1.5 inch plumbing internally
  • Type: Pool Pump
  • Installation: Universal Installation
  • Item Weight: 10.2 kg / 22.5 lbs
  • Brand: BEST-HOMEPRO
  • Manufacturer Warranty: Lifetime
  • Amperage: 16 A
  • Material: ABS
  • Maximum Head Lift: 19m / 62.34ft
  • Power Source: Corded
  • Features: Easy Assembly
  • Item Length: 22.4″
  • Power: 1850w
  • Suitable For: Above Ground Pools
  • Certification: UL Certification
  • Qmax: 560 L/min
  • Hmax: 21 Meter
  • Inlet: 1.5″ Internal
  • Horsepower: 2.5HP
  • Voltage: 110 V
  • Max Water Temperature:: 50
  • IPX5 CAP: 60F/250V AC
  • Overall Dimension: 23.6″*11.8″*8.7″

1.5HP IN-GROUND Swimming Pool Pump 2-Speed Motor Strainer High-Flo Inground

1.5HP IN-GROUND Swimming Pool Pump 2-Speed Motor Strainer High-Flo Inground

1.5HP IN-GROUND Swimming Pool Pump 2-Speed Motor Strainer High-Flo Inground

1.5HP IN-GROUND Swimming Pool Pump 2-Speed Motor Strainer High-Flo Inground

1.5HP IN-GROUND Swimming Pool Pump 2-Speed Motor Strainer High-Flo Inground

1.5HP IN-GROUND Swimming Pool Pump 2-Speed Motor Strainer High-Flo Inground

1.5HP IN-GROUND Swimming Pool Pump 2-Speed Motor Strainer High-Flo Inground

When installing, please consult qualified professional and local pool guide line. These pump are never installed but it does have some minor scratch and dents. The pump are 2 speed with 1.5 npt threads. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Easy start up fill pump with water upon first use to prevent motor from overheating. Thermally protected motor for greater protection and longevity. Swimming Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Compatible with DE, sand, and cartridge filter. This Swimming Pool Pump has a/Certification to ensure recognized Standards for Safety. Intended for use with swimming pools, hot tubs, and spas. Material: PPGF30 + PC. Internal Inlet Fitting: 1.5 NPT. The item “1.5HP IN-GROUND Swimming Pool Pump 2-Speed Motor Strainer High-Flo Inground” is in sale since Tuesday, June 1, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “tata858″ and is located in West Covina, California. This item can be shipped to United States.
  • Installation: none
  • Power Source: corded-electric
  • Color: Black
  • Material: Mixed
  • MPN: Does Not Apply
  • Set Includes: Does Not Apply
  • Item Length: Does Not Apply
  • Suitable For: Indoor
  • Brand: XtremepowerUS
  • Minimum Pump Power Requirement: 1 1/2 hp
  • Type: Pool Pump
  • Voltage: 230 V
  • Item Height: Does Not Apply
  • Model: Swimming Pool Pump
  • Features: 2 speed
  • Item Width: Does Not Apply

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward

Always pay attention before use. Before use, please adjust to the corresponding voltage for home use, and then fill the water pump with water before using it, otherwise the motor will be damaged. When adjusting the voltage, be sure to adjust after turning off the power. Otherwise the motor will be damaged. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Durable Corrosion -Stainless Steel 1.5 HP Shaft, the shaft is constructed with a reinforced thermoplastic body for longer life and durability. The sand filter is made of PPGF30 + PC, 100% drip proof, effective insulation and protection against pool chemicals, heat-resistant double-sized seal for long motor life. POOL PUMP -This self-priming heavy-duty pump delivers outstanding performance and reliability at a fantastic price and costs less than big name brands. The mighty force of this pump makes it efficient and an economical choice. UL Certified – This Swimming Pool Pump has a UL Certification to ensure recognized Standards for Safety. Type: Swimming Pool Pump. Motor Shaft Material: Stainless Steel. Pump Housing Material: PPGF30 + PC (anti-Oxident). Rated Power: 1100W/1.5HP. Inner/Outer coupling: 1-1/2”NPT G2-1/4′. 1 x Water Pump. 2 x 1-1 / 2”NPT Inner coupling. 2 x 48.5mm Inner coupling. The item “1.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward” is in sale since Sunday, June 21, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “freedomstore17″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.
  • Brand: LO-HOME
  • MPN: Does Not Apply
  • Type: Pool Pump
  • Pool Type: In Ground &Above Ground
  • Horsepower: 1.5hp
  • Speed: Single-Speed
  • Model: Swimming Pool Pump
  • Qmax: 410 L/min
  • Hmax: 15.5 Meter
  • Dual voltage: 110-120V/220-240V
  • Power: 1100W/1.5HP
  • Frequency: 60HZ
  • Color: Black
  • Certification: UL Certification

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements. Hayward 1/1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacements. UL Certification for motor, longer lasting than those without certification. C-Clip Connector allows for easy disengagement of strainer housing in a matter of seconds for. High performance, energy saving motor with stainless steel shaft could stand wear and tear. High efficiency, low maintenance and reliability. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. 100% drip proof, heat-resistant double-sized seal for long motor life. Drain plug for easy maintenance of pump. Suggested Installation: 24″-26″ sand filter and above-ground pools. Horsepower: 1/1.5 HP. Flow: 5555GPH1HP/ 6500 GPH1.5HP. Temp: 104 Degree Fahrenheit (40 Degree Celsius). Power Cord: 58.8. 1x 1HP/1.5HP Dual voltage Swimming Pool Pump. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage. The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. The pump prevents the inlet from entering the water and burns the motor. There is Water in The Pump. Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. The Pump stop working suddenly. Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Used items will not be accepted for return. Welcome to my store. We will reply you ASAP. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem. The item “NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements” is in sale since Tuesday, August 25, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “yunli1993″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.
  • Custom Bundle: No
  • Brand: Hongmotor
  • Type: Pool Pump
  • Model: Swimming Pool Pump
  • MPN: Does not apply
  • Pool Type: In Ground &Above Ground
  • Horsepower: 1/1.5HP
  • Speed: Single-Speed
  • Qmax: 350/410 L/min
  • Hmax: 11/15.5 Meter
  • Dual voltage: 110-120V/220-240V
  • Frequency: 60HZ
  • Color: Black
  • Certification: UL Certification

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement. Always pay attention before use. Before use, please adjust to the corresponding voltage for home use, and then fill the water pump with water before using it, otherwise the motor will be damaged. When adjusting the voltage, be sure to adjust after turning off the power. Otherwise the motor will be damaged. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Durable Corrosion -Stainless Steel 2.0 HP Shaft, the shaft is constructed with a reinforced thermoplastic body for longer life and durability. The sand filter is made of PPGF30 + PC, 100% drip proof, effective insulation and protection against pool chemicals, heat-resistant double-sized seal for long motor life. POOL PUMP-This self-priming heavy-duty pump delivers outstanding performance and reliability at a fantastic price and costs less than big name brands. The mighty force of this pump makes it efficient and an economical choice. UL Certified- This Swimming Pool Pump has a UL Certification to ensure recognized Standards for Safety. Type: Swimming Pool Pump. Motor Shaft Material: Stainless Steel. Pump Housing Material: PPGF30 + PC (anti-Oxident). Rated Power: 1500W/2.0HP. Inner/Outer coupling: 1-1/2”NPT G2-1/4′. 1 x Water Pump. 2 x 1-1 / 2”NPT Inner coupling. 2 x 48.5mm Inner coupling(free gift). The item “110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Tuesday, July 14, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “mrl-7312″ and is located in Flanders, New Jersey. This item can be shipped to United States.
  • Brand: Unbranded
  • Type: Swimming Pool Water Pump
  • Voltage: 110-120V/220-240V 60Hz
  • Model: 2040700200M
  • MPN: 2040700200M
  • Custom Bundle: No
  • Modified Item: No
  • Style: Modern
  • Speed: Max Flowrate: 410L/min
  • Horsepower: 2hp
  • Pool Type: Above-Ground
  • Color: Black
  • Rated Power: 1500W/2.0HP
  • Max Flow Rate: 410L/min
  • UL Approval: Yes
  • Inner/Outer coupling: 1-1/2”NPT G2-1/4”
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Motor Shaft Material: Stainless Steel
  • Max Height: 12.5M

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Please contact our customer service team immediately if: 1. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Tuesday, July 21, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “fansdealonline” and is located in Westbury, New York. This item can be shipped to United States.
  • Features: Easy Installation
  • Certification: UL Certification
  • MPN: YCBHBP
  • Qmax: 410 L/min
  • Item Width: 9.6″
  • Hmax: 15.5 Meter
  • Installation: Universal Installation
  • Voltage: 110-120V/220V-240V
  • Horsepower: 1.5HP
  • Item Length: 22.4″
  • Item Height: 11.4″
  • Amper: 10.8/5.4A
  • Motor Shaft Material: Stainless Steel
  • Suitable For: Above Ground Pools
  • Power Source: Corded
  • Material: ABS
  • Minimum Pump Power Requirement: 1 1/2 hp
  • Speed: Single-Speed
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1100W/1.5HP
  • Item Weight: 26lbs
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • RPM: 3450/min
  • Power Cord: 59″
  • Pool Type: In Ground &Above Ground
  • Brand: FANSDEALONLINE
  • Warranty: 5 Years
  • Color: Black
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Type: Pool Pump

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

Please fill the pump body with water before energizing. If the mechanical seal is operated in a dry condition, it will Damage to the mechanical seal and impeller causing water leakage. Powerful Self-Priming IP55 2.5HP Electric Motor. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. 2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo W/ Strainer Baske. Voltage:110V / 60Hz. Head:Max 19m / 62.34ft. Inlet:1.5” Internal. Outlet:1.5” Internal. Pipe Compatibility:Fit 1.5 inch plumbing internally. Weight: 10.2 kg / 22.5 lbs. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. Max 19m / 62.34ft. 600 x 205 x 350mm/ 24 x 8.07 x 14inch (L x W x H). 10.2kgs / 22.5 lbs. B Damage caused by natural disasters, flood fire, lightning or pollution. C If item was opened, any parts removed or repaired by any unauthorized person. D If damaged parts are the TFT screen or the screen has less than 3 dead pixels. The item “2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske” is in sale since Monday, October 5, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “9hk4872″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.
  • Type: SPP250E
  • Brand: Unbranded
  • UPC: Does not apply
  • Model: SPPE 250
  • Speed: 560 L/m
  • Horsepower: 1850W/2.5HP
  • Pool Type: SPP250E
  • Voltage: 110V / 60Hz
  • IP55 INS CL.: Max. 50 C
  • Amps: 6.8
  • Head: Max 19m / 62.34ft
  • Capacitor: 25 F
  • Inlet: 1.5” Internal
  • Outlet: 1.5” Internal
  • Noise Level: <65dB
  • Package Size: 600 x 205 x 350mm/ 24 x 8.07 x 14inch (L x W x H)
  • Weight: 10.2kgs / 22.5 lbs
  • MPN: Does not apply

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). We have Four warehouses located in CA, NY, NJ & GA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. The item “115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Wednesday, July 22, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “homesupplies01″ and is located in Westbury, New York. This item can be shipped to United States.
  • Features: Easy Installation
  • Manufacturer Warranty: 5 years
  • Certification: UL Certification
  • MPN: 2040700300
  • Qmax: 410 L/min
  • Item Width: 9.6 in
  • Hmax: 15.5 Meter
  • Installation: Universal Installation
  • Voltage: 110-120V/220V-240V
  • Horsepower: 1.5HP
  • Item Length: 22.4 in
  • Item Height: 11.4 in
  • Amper: 10.8/5.4A
  • Motor Shaft Material: Stainless Steel
  • Suitable For: Above Ground Pools
  • Material: ABS,PVC, Stainless Steel, Copper
  • Minimum Pump Power Requirement: 1 1/2 hp
  • Speed: Single-Speed
  • Model: 1.5HP 110V-240V
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1100W/1.5HP
  • Item Weight: 26 lb
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Power: 1100 W
  • RPM: 3450/min
  • Power Cord: 59″
  • Pool Type: In Ground &Above Ground
  • Brand: HOMESUPPLIES
  • Warranty: 5 Years
  • Color: Black
  • Energy Star: A+++
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Type: Pool Pump

1.5HP Swimming Pool Pump Super Flow Efficient Large Strainer Basket 2-Speed UL

1.5HP Swimming Pool Pump Super Flow Efficient Large Strainer Basket 2-Speed UL

1.5HP Swimming Pool Pump Super Flow Efficient Large Strainer Basket 2-Speed UL

1.5HP Swimming Pool Pump Super Flow Efficient Large Strainer Basket 2-Speed UL

1.5HP Swimming Pool Pump Super Flow Efficient Large Strainer Basket 2-Speed UL

1.5HP Swimming Pool Pump Super Flow Efficient Large Strainer Basket 2-Speed UL

1.5HP Swimming Pool Pump Super Flow Efficient Large Strainer Basket 2-Speed UL

XtremepowerUS Dual Speed 1.5HP Pool Pumps deliver outstanding performance and reliability at a fraction of the price of the big name brands with Energy Saving up to 35% compare regular pump. Heavy-duty construction and advanced engineering provide high efficiency and quiet operation. Energy Saving Swimming Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Built-in (2) Speed settings gives more user control to adjust the speed of water transfer with the low and high settings between 1,750 to 3,450 rotations per minute. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Oversized strainer basket with transparent lid cover to indicate whether the basket needs to be cleaned out of debris, leaves and particles of dust to prevent clogging. High performance motor with built-in airflow ventilation and thermal overload protection will deliver quieter noise and smoother running experience than traditional pumps of its class. Designed for above-ground pools and spas of all types and sizes. It UL Certified to meet specific product standards and safety requirements. Please Note: Not for Sale in California. Max Flow: 4980 GPH. Fitting Size: 1.5NPT. Max Section Height: 40ft. Overall Dimension: 22″(L) x 7-1/2″(W) x 10-1/2(H). When installing, please consult qualified professional. The item “1.5HP Swimming Pool Pump Super Flow Efficient Large Strainer Basket 2-Speed UL” is in sale since Wednesday, September 18, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “hd-tool” and is located in Chino, California. This item can be shipped to United States.
  • Brand: XtremepowerUS
  • Type: Pool Pump
  • Features: Variable Speed
  • Power Source: corded-electric
  • Item Height: 10.5
  • MPN: Does Not Apply
  • Model: 1.5HP Swimming Pool Pump
  • Item Width: 7.5
  • Item Length: 22
  • Material: Metal
  • Voltage: 115
  • Color: Black
  • Frame Material: ABS Plastic, Steel

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement. Reliable performance with 304 grade stainless steel motor shaft. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. 2 HP In-Ground Pump also work with above. Compatible with DE, sand, and cartridge filter. Self-priming for in-ground functionality. Drain plug for easy winterizing. High durability with corrosion proof polymer. ETL Certificate, UL Certificate for motor. Kindly note:These pumps are capacitor start and not for use/sale in California. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Friday, August 2, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States.
  • Horsepower: 2hp
  • Speed: Single-Speed
  • RPM: 3450
  • GPH: 5520
  • Type: Swimming pool pump
  • Hmax: 79ft
  • Pool Type: In-Ground
  • MPN: J15001
  • Brand: iMeshbean