? Welcome??? We are committed to providing customers with better and more favorable products!!! Thank you for your support. Swimming Pool Heat Exchanger 200 kBtu/hour 1″+1 1/2″ FPT 304 Stainless Steel. The swimming pool heat exchanger is made of high-grade anticorrosive stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2″ FPT is used on one side of the swimming pool water, and 1″ FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 200 kBtu/hr. It gets hot immediately without waiting. This kind of heat exchanger is a very safe, reliable, efficient and cost-effective way to heat swimming pools or spas through any hydraulic system. The heat recovery pool heater is very suitable for swimming pools, spas, hot tubs, solar, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Material: 304 stainless steel. Heat transfer area: 4.8 square feet. Hot water flow rate: 30 L/min. Cold water flow: 250 L/min. Side of hot water pipe: 1 FPT. Same side port: 1 1/2 FPT. Product Size: 48.514cm/19.095.5inch. 1 x stainless steel heat exchanger. 2 x fixed bracket. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 11.5lbs(5.2kg). Gas / Wood / Solar / Heat Pump / Electricity. Hot Water flow rate. Side of hot water pipe. 4.8 square feet. 100,001-350,000 BTUh.
Product description:? The swimming pool heat exchanger is made of high-grade anticorrosive stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2″ FPT is used on one side of the swimming pool water, and 1″ FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 200 kBtu/hr. It gets hot immediately without waiting. Swimming Pool Heat Exchanger 200 kBtu/hour 1″+1 1/2″ FPT 304 Stainless Steel. NEW Swimming Pool Heat Exchanger 304 Stainless Steel 200 kBtu/hour 1″+1 1/2″ FPT. The heat exchanger is made of 304 stainless steel, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. It is safe to use because it does not catch fire, leak, burn during operation. Great Durability: The heat exchanger is made of 304 stainless steel, which is durable and has a long service time. Ensuring Constant Temperature: The heat exchanger can ensure constant temperature, transferring heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Fast Heating: It is based on a temperature difference of 60°C (140°F) between incoming water and hot water, providing 200 kBtu/hr of freshwater. Therefore, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. Safe to Use: It is safe to use because it does not catch fire, leak, burn during operation, which brings great reassurance to you. More Water-saving: It does not waste water during operation and tries to make the best use of every drop of water, so it is more water-saving. Easy to Clean: You can easily clean it without much effort and time because of its smooth surface and fewer gaps. Wide Application: It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc. It is used in spas, swimming pools, spas, hot tubs, etc. Threaded Connection Ports: The heat exchanger has four threaded connections ports that can connect other tubes more firmly and tightly, which is uneasy to fall off and affect the heat transfer. 304 Stainless Steel: The heat exchanger is made of 304stainless steel so that it is rustproof and saltwater resistant. Therefore, it is suitable for chlorine or saltwater pools and spas. It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Material: 304 Stainless Steel. Heat Transfer Area: 0.45m²/4.8ft². Hot Water Flow Rate: 30L/Min (8L/Min). Cold Water Flow: 250L/Min (66L/Min). Side of Hot Water Pipe: 1inch FPT. Same Side Port: 1 1/2 FPT. Packing Size: 541919cm/217.57.5inch. Product Size: 6014cm/23.65.5inch. Connection Port Diameter: 3.8cm/1.5inch, 2.54cm/1inch. Weight: 5.2kg/11.5lbs. The product needs basic assembly. Professional would be highly recommended. 1 x Stainless Steel Heat Exchanger. 2 Sets x Fixed Brackets. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Thank you very much for your orders. I hope our productsmet your expectations. As always, we are happy to support you with anyfuture projects you may undertake. I wish you thebest with your current project and look forward toseeing the outcome. Thank you again, and I lookforward to working with you in the future. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
What’s Included: 1 X Stainless Steel Heat Exchanger 2 X Fixed Bracket Weights&Dimensions Packing Size: 48.514cm/19.095.5inch Weight: 5.2kg Specifications : Material: 304 Stainless Steel Output: 200 Kbtu/Hour Heat Transfer Area: 4.8 Square Feet Hot Water Flow Rate: 30 L/Min Cold Water Flow: 250 L/Min Side of Hot Water Pipe: 1″ Fpt Same Side Port: 1 1/2″ Fpt. Welcome to Our Store. The Swimming Pool Heat Exchanger Is Made of. High-grade Anticorrosive Stainless Steel. Which Has the Characteristics of Anti-rust and Salt Water Resistance, so It Is Very Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. 1 1/2″ Fpt Is Used on One Side of the Swimming Pool Water, and 1″ Fpt Is Used for Hot Water. The Salt Pond Heat Exchanger Adopts an. To Ensure a Continuous Constant Temperature and Indirectly Transfer Heat Between Any Hot Water Circuit, Steam Circuit and Any Swimming Pool or Spa Facility. Hell-and-tube Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Inlet and Hot Water. And Can Provide a Fresh Pond of 200 Kbtu/Hr. It Gets Hot Immediately Without Waiting. This Kind of Heat Exchanger Is a Very Safe, Reliable, Efficient and Cost-effective Way to Heat Swimming Pools or Spas Through Any Hydraulic System. The Heat Recovery Pool Heater Is Very Suitable for. Swimming Pools, Spas, Hot Tubs, Solar, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting. 1 X Stainless Steel Heat Exchanger. 2 X Fixed Bracket. Packing Size: 48.514cm/19.095.5inch. Material: 304 Stainless Steel. Heat Transfer Area: 4.8 Square Feet. Hot Water Flow Rate. Side of Hot Water Pipe: 1 Fpt. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
