Tag Archives: electric

BESTWAY 58259 Electric Swimming Pool WATER HEATER 2.8KW Above Ground up to 15FT

BESTWAY 58259 Electric Swimming Pool WATER HEATER 2.8KW Above Ground up to 15FT

BESTWAY 58259 Electric Swimming Pool WATER HEATER 2.8KW Above Ground up to 15FT

BESTWAY 58259 Electric Swimming Pool WATER HEATER 2.8KW Above Ground up to 15FT

Electric Swimming Pool HEATER +. Increases the temperature of the water of the swimming pool of about 0. 5-1.5 Degree (h) 1-3 °F /h. And on the basis of the total volume of water max output; of Heater: 40 °C (104 °F). Compatible with:-pools: 4.57 m (15′) and smaller. Ideal for use with pools 15 feet or smaller. Must be used in conjunction with a filter pump or sand filter with a flow rate of up to 3,785 L/h (1,000 g/h) (not supplied). Volume of water of the swimming pool: 400 1.520 17.000 L 4.500 gal. Flow filter pump/Sand Filter: 3.785 L/h, 1000 gal/h and lower 3.785 L/h, 1000 gal/h. 220-240 V, energy: 2,800 W at 20 degrees. Cable length: 4 m approximately. Dimensions (height x length x depth): 25 x 48 x 29 cm. The item “BESTWAY 58259 Electric Swimming Pool WATER HEATER 2.8KW Above Ground up to 15FT” is in sale since Thursday, June 24, 2021. This item is in the category “Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Pool Equipment & Parts\Pool Pumps”. The seller is “gp_ltd” and is located in Spalding. This item can be shipped to United Kingdom, United States, Japan, Canada, Ireland, Australia, Germany, France, Greece, Italy, Spain, Russian federation, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, Hungary, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Sweden, Bahrain, Brazil, New Zealand, China, Israel, Hong Kong, Norway, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.
  • Maximum Head Lift: 15 ft
  • Type: Heat Pump
  • Brand: Bestway
  • Suitable For: Above Ground Pools
  • Voltage: 220-240v

Pool-Heater Pump Electric Pool 3KW for swimming pool complete 220V Intex 28684

Pool-Heater Pump Electric Pool 3KW for swimming pool complete 220V Intex 28684

Pool-Heater Pump Electric Pool 3KW for swimming pool complete 220V Intex 28684

Pool-Heater Pump Electric Pool 3KW for swimming pool complete 220V Intex 28684

Pool-Heater Pump Electric Pool 3KW for swimming pool complete 220V Intex 28684

Pool-Heater Pump Electric Pool 3KW for swimming pool complete 220V Intex 28684

Pool-Heater Pump Electric Pool 3KW for swimming pool complete 220V Intex 28684

Intex 28684 water heater for the pool, perfect to enjoy it even outside the hottest months of the year thanks to its innovative low energy consumption able to warm up the water to 35°. Compatible with all pools that have a pump. DELIVERED WITH A EUROPEAN RCD SAFETY PLUG. Heater exceeds European safety standards (TUV and CE approved). This heater is suitable for pools up to 457 cm in diameter and heats the water to a maximum of 35°C. You can use the Intex electric heater as additional heating for larger pools. The temperature of a pool of 1 m³ rises ± 3°C per hour with this heater. This heater pump for the pool by Intex is a most innovative pool accessory that will warm up the water of your pool to 35° in just a short time. In case you already own a solar heater Intex 28685 this can be easily combined for added power. This Intex 28684 is able to warm up the water by 0.25° per hour in a 10 m2 pool. Easy to install and designed to save time and energy with its innovative internal heating system. Place the heater next to the filter pump. Attach it and press the reset button. The pool will start tho heat up. The heating has 32 mm connections and you simply plug it in the mains (220-240 V). The built in safety systems make this heater durable over the years. A sensor avoid turning on the heater when the water is too low. A safety lock interrupts power supply when electronical issues arise. A thermostat protects the heater from overheating. A sensor turns off the heater when a fall is detected. 3 KW heating with RCD plug. One 155 cm connection hose with 32 mm diameter. It is connected in series after the filter pump with a capacity from 2006 to 3785 l / h. The pool water temperature should be between 17 and 35 ° C. Equipped with RCD (electric shock protection system), thermostat and water level indicator. Power – 3 kW (15A socket required). Hose connection hole diameter: 32 mm. Weight – 3.7 kg. The product is supplied with a European plug, for the UK market the item is only suitable for use with a Socket Converter. The item “Pool-Heater Pump Electric Pool 3KW for swimming pool complete 220V Intex 28684″ is in sale since Monday, May 24, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “valeninav” and is located in Minneapolis, Minnesota. This item can be shipped worldwide.
  • Model: 28684
  • Water Temperature Range:: 35 °C (95 °F) max.
  • Power: 2501-3000 W
  • Heating System: Instantaneous (Tankless)
  • Power Source: Electric
  • MPN: 28684
  • Suitable For: Hot Tubs
  • Voltage: 220 V
  • Features: Auto Shut-off
  • Water Temperature Range: 95 °F
  • Brand: Intex
  • Type: Heat Pump

Intex 28684 Pool-Heater Electric Pool 3KW for swimming pool 220V

Intex 28684 Pool-Heater Electric Pool 3KW for swimming pool 220V

Intex 28684 Pool-Heater Electric Pool 3KW for swimming pool 220V

Intex 28684 Pool-Heater Electric Pool 3KW for swimming pool 220V

Intex 28684 Pool-Heater Electric Pool 3KW for swimming pool 220V

Ntex 28684 water heater for the pool. Perfect to enjoy it even outside the hottest months of the year thanks to its innovative low energy consumption able to warm up the water to 35°. Please note that this water heater works with 220-240V voltage, 125W. Compatible with all pools that have a pump. DELIVERED WITH A EUROPEAN RCD SAFETY PLUG. The heater complies with European safety standards (TUV and CE approved). The description of the water heater. This heater is suitable for pools up to 457 cm in diameter and heats the water to a maximum of 35°C. You can use the Intex electric heater as additional heating for larger pools. The temperature of a pool of 1 m³ rises ± 3°C per hour with this heater. This heater pump for the pool by Intex is a most innovative pool accessory that will warm up the water of your pool to 35° in just a short time. In case you already own a solar heater Intex 28685 this can be easily combined for added power. This Intex 28684 is able to warm up the water by 0.25°C per hour in a 10 m2 pool. Easy to install and designed to save time and energy with its innovative internal heating system. Place the heater next to the filter pump. Attach it and press the reset button. The pool will start tho heat up. The heating has 32 mm connections and you simply plug it in the mains (220-240 V). The built in safety systems make this heater durable over the years. A sensor avoid turning on the heater when the water is too low. A safety lock interrupts power supply when electronical issues arise. A thermostat protects the heater from overheating. A sensor turns off the heater when a fall is detected. 3 KW heating with RCD plug. One 155 cm connection hose with 32 mm diameter. Characteristics of the water heater. It is connected in series after the filter pump with a capacity from 2006 to 3785 l / h. The pool water temperature should be between 17°C and 35°C. Equipped with RCD (electric shock protection system), thermostat and water level indicator. Power – 3 kW (15A socket required). Hose connection hole diameter: 32 mm. Weight – 3.7 kg. The product is supplied with a European plug, for the UK market the item is only suitable for use with a Socket Converter. Important information for International Buyers. I promise to pack up the product very carefully. If you have any question, please contact me. We ask you to take this into account when placing your order. Please check out my other listings! The item “Intex 28684 Pool-Heater Electric Pool 3KW for swimming pool 220V” is in sale since Monday, June 21, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “bestgoodsfromrussia8″ and is located in Yaroslavl. This item can be shipped worldwide.
  • Model: 28684
  • Water Temperature Range: Max 35°C (95°F)
  • Power Source: Electric
  • Type: Heat Pump
  • Features: Auto Shut-off
  • Power: 2500-3000 W
  • Brand: Intex
  • Suitable For: Above Ground Pools
  • Heating System: Instantaneous (Tankless)
  • Voltage: 220 V

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

(48 mm) Interface Swimming Pool Heater. The Electrical pool heater is designed specifically for the needs of the Jacuzzi. The thermostat can keep the water temperature between 20-40(68-104) adjustable, set a most comfortable bath temperature. Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating, and protect users against danger. Please strictly follow the instructions before use. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. The inner tank of the thermostat is stainless steel, which does not rust and the water quality is cleaner. The heating is fast, and steam can be quickly released in a short time. Once the temperature is over 60(140), the temperature protection device will trip automatically. Thermostat with a pressure-sensitive switch can be protected from a dangerous operating system in the absence of water. Once the water level is low (water pressure is below 20KPa), the pressure sensor switch will interrupt the power supply. Thermostat temperature preset by the user based on, until the self-heating temperature. When the water temperature drops a few degrees, the thermostat will automatically turn on the heating. The product is small in size, easy to carry and install. It can be installed in the circulation massage tube at the bottom of the bathtub. The thermostat for home sauna is also widely used commercially. It can be applied to multiple scenes such as indoor and outdoor small swimming pools and bathtubs. AC 220-240 V / 50-60 Hz. 2.7-3.3 KW. (3 x 4 mm²). Pipe Dimeter: 1 (2.54 cm). 10.4″ x 4.9″ x 4.9(264 x 125 x 125 mm). Net Weight: 4.4 lbs (2 kg). Suitable For: Max 2 cbm Hot Tub & Swimming Pool Equipment. 1 x Water Heating Thermostat. SMART THERMOSTAT – The thermostat comes with a temperature probe, which can sensitively sense the temperature of the pool water. The heating can automatically adjust to the set value of the thermostat. Adjustable temperature range of 20-40(68-104), time can be freely set. SAFE & RELIABLE – If the temperature of the water or thermostat housing exceeds 60°C (140°F), the high-temperature protection device will immediately trip. Once the flow is small or not enough water pressure, the thermostat will switch off the power automatically, prevents the thermostat from being damaged by dry burning. DURABLE MATERIAL – The inner tank of the thermostat is stainless steel, and it has a long service life without rust. Internal use of international cables, in line with international standards, without having to worry about product quality problems during use. SIMPLE OPERATION – The internal circulation of the water heater is smooth, with no scum. It is easy to disassemble. After the correct installation, the user rotates the control switch to set the temperature and the heating indicator lights. The water will automatically heat up to the level set by the user and maintain the temperature. MULTIPLE USAGES – Jacuzzi water heater operation is fully automatic and easy to use. It is suitable for heating constant temperature systems such as small hot springs, swimming pools, and jacuzzis. Note: Cable Wire without Plug. Do not place any electrical appliances within 1.5 meters of the thermostat. Do not use the thermostat in saltwater, acid water, or alkaline water. Do not use a thermostat where chemically aggressive gases or solvents. Do not install the thermostat outlet of the bathtub in the middle of pipes or valves or check valves. Temperature heaters should be used with 550W or higher circulating water pumps for normal use. Please use it along with the circulating water pump of different specifications, rather than alone. Do not use it without water. It must be connected to the pool with water for use. It is assembled with cable wire, but without a plug, so the power cord is needed. As the power is high, you’d better use it with independent sockets, rather than the plug board. 1.89(48 mm) Interface Swimming Pool Heater. 1.97(50 mm) Interface Swimming Pool Heater. 0.12″ x 0.16″ (3 x 4 mm²). 1 (2.54 cm). 4.4 lbs (2 kg). 2 cbm Hot Tub & Swimming Pool Equipment. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Oncethe temperature is over 60(140), the temperature protection devicewill trip automatically. Thermostatwith a pressure-sensitive switch can be protected from a dangerousoperating system in the absence of water. Once the water level is low(water pressure is below 20KPa), the pressure sensor switch willinterrupt the power supply. Thermostattemperature preset by the user based on, until the self-heatingtemperature. When the water temperature drops a few degrees, thethermostat will automatically turn on the heating. Theproduct is small in size, easy to carry and install. It can beinstalled in the circulation massage tube at the bottom of the bathtub. Thethermostat for home sauna is also widely used commercially. It can beapplied to multiple scenes such as indoor and outdoor small swimmingpools and bathtubs. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. All emails will be responded to within 12-24 hours. The item “Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New” is in sale since Tuesday, September 15, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “qiannlan-3″ and is located in Perth Amboy, New Jersey. This item can be shipped to United States, Canada.
  • BTUh Heating Rating: /
  • Model: B-M3-48MM
  • Water Temperature Range: /
  • Energy Star: 5 Stars
  • Tank Capacity: Max 2CBM
  • Type: Pool Heater
  • MPN: ZY8LX0090
  • Brand: VEVOR
  • Manufacturer Warranty: 2 years
  • Amperage: 14A
  • Heating System: Instantaneous (Tankless)
  • Country/Region of Manufacture: China
  • Power Source: Electric
  • Features: Automatic Heating
  • Material: Metal
  • Current: 14A
  • Wire: 3*4 Square millimeter
  • Pipe Dimeter: 2.54cm/1inch
  • Power: 2.7-3.3KW
  • Suitable For: Hot Tub,Swimming Pool,Jacuzzi,Spa
  • Size: 264 * 125 * 125mm/10.4*4.9*4.9inch
  • Net Weight: 2kg/4.4lbs
  • Phase Parameters: Single Phase
  • Package: 1 x Water Heating Thermostat,2 x Interface,1 x Manual
  • Color: As picture shows
  • Interface size: 48mm/1.89″
  • Capacity: Max 2CBM
  • Voltage: AC220-240V/50-60Hz

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

You may also like. 15KW swimming pool heater SPA electric water heater constant temperature hot tub. 15KW 220V/240V/380V Swimming Pool & SPA Hot Tub Electric Water Heater DigitalThermostat. When placing an order, please pay attention to the voltage, otherwise it will be sent according to the voltage of your country. Series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Read through the manual carefully to know better about the heater’s installation and operation, and check the parameters before installation. Check the circulation system first before turn on the heater. Never disassemble the heater when connecting to power supply. Never turn on the heater without water. No power switch is designed for the heater. The front panel switch can only turn off the controller, thus you should cut off the main power supply before performing maintenance or repair. Proper grounding is important. Start the circulation pump for at least 2 minutes before turn on the heater, and turn off the circulation pump at least 2 minutes after turn off the heater. Once unexpected high temperature 60140occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the’Reset’ button to restart the heater. Control system automatically heat-up procedure. Once reconnected to power or if the water temperature is 1 below the user setting temperature at least 10 minutes after entering the waiting stage, the heater enters the preparation stage. If hint message” does not appear on the panel within 2 minutes, and the water temperature is 1 below the user setting temperature after 2 minutes, the heater enters next stage pre-heat stage. In this stage, heater heats up for 10 seconds and waits for 90 seconds. Heating’ indicator lights for 10 seconds. If hint message” does not appear on the panel and the water temperature is 1 below the user setting temperature, heater enters next stage heat-up stage. In this stage, all heating elements turn on, and heating indicator turns on as well. If hint message” does not appear, heater will heat up to 1 above the user setting temperature, then heating indicator blinks for 2 minutes. After that, circulation pump turns off for models with circulation pump control. Heater enters next stage waiting stage. Waiting stage lasts for at least 10 minutes. 10 minutes later, if the water temperature is 1 below the user setting temperature, the heater jumps to preparation stage, otherwise, it remains in the waiting stage. The automatically heat-up process is non-stopping and will continue to circulating through all stages until the control system or heater is power off. You could ask for models with separated circulation pump control function. Increase the user setting temperature by 1 or 2. Decrease the user setting temperature by 1 or 2. Switch between temperature unitPress button for more than 3 secondspanel displays and in turns. Release the button once the unit you wish to choose appears, 5 seconds later, panel restore to display the current water temperature. Switch between temperature sensorsPress button, the panel will blink and display temperature measured by temperature sensor 2. After 5 seconds or press thebutton again, panel will restore to display current water temperature which is measured by temperature sensor 1. Temperature display and setting. Temperature display range 653 or 43127. Temperature setting range 2250 or 72122factory default temperature is 42. Press or button to increase or decrease the setting temperature by 1(2)and the panel blinks and display the setting temperature. 5 seconds later, the panel stops blinking, confirm the setting change and restore the current temperature display. If reconnected to power, the user setting temperature is set to default temperature 42. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Manual reset temperature control switch: Once unexpected high temperature 60 occurs, the temperature switch cuts off the system. Unique control system: ST series are the newest generation with our unique control system. Sensor technique are: A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations; B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater; C. Avoid affection of ion accumulation to mechanical sensors; D. Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. Housing material: Aluminum-coated plate. Net Weight: 7.5 kg/16.5lbs. Package Size: 120560380 mm/4.72214.9. 1 x Pool Heater. Does not include power plug. Order may be cancelled due to insufficient of your information. Missing item or get wrong item or damaged items, or the item seams can not work well, please keep all the items in original condition, make all the items together with packing, then take some photos of them and send us the photos by message box. (2) How we will react? (sometimes you may be requested to return the incorrect item). (3) Valid time for returning. We promise to achieve your 100% satisfaction. Thank you so much for your kindness and understanding. The item “15KW swimming pool heater SPA electric water heater constant temperature hot tub” is in sale since Tuesday, January 5, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “superstronger” and is located in . This item can be shipped worldwide.
  • Type: Pool Heater
  • Brand: Vevor
  • MPN: FGFDG007
  • Features: Automatic Heating
  • Model: ST-15-220V
  • Country/Region of Manufacture: China
  • Manufacturer Warranty: 2 years
  • Suitable For: Hot Tubs,Swimming Pool,Jacuzzi,Spa
  • Power Source: Electric
  • Voltage: 220V-380V
  • Power: 15KW
  • Energy Star: 5 Stars
  • Amperage: 50A
  • Tank Capacity: Less than 7.5 CBM
  • Item Weight: 16.5 lbs/7.5 kg
  • Heating System: Instantaneous (Tankless)
  • BTUh Heating Rating: /
  • Water Temperature Range: /
  • Current: 50A
  • Pipe Diameter: 2″/5.08 cm
  • Capacity: Less than 7.5 CBM
  • Product Size: 18.7 x 14 x 3.9″/47.5 x 35.5 x 10 cm
  • Material: Stainless Steel
  • Input Voltage: AC 220-380V 50/60Hz

220V 2KW 13.6A Swimming Pool and SPA Heater Electric Heating Thermostat

220V 2KW 13.6A Swimming Pool and SPA Heater Electric Heating Thermostat

220V 2KW 13.6A Swimming Pool and SPA Heater Electric Heating Thermostat

220V 2KW 13.6A Swimming Pool and SPA Heater Electric Heating Thermostat

220V 2KW 13.6A Swimming Pool and SPA Heater Electric Heating Thermostat

You may also like. 220V 2KW 13.6A Swimming Pool and SPA Heater Electric Heating Thermostat. This thermostat is designed specifically for the hot tub, the thermostat is installed in the pipeline jacuzzi. When adding hot water bath, start the pump, the thermostat automatically heat insulation work, so the water temperature bath maintained at 39 degrees Celsius, give your Jacuzzi to create a more comfortable environment Feature and operation. The initial set temperature settings: COASTS equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat’s normal function, By using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40 °C 2. COASTS thermostat operation is fully automated, clockwise, the heating is on, indicator light, temperature reaches a preset temperature, will remain at that temperature 3. The thermostat can be maintained within a temperature not exceeding 40 °C (104 °F) range. If cold water is started, will be 6 8 °C / h elevated temperatures 4. Automatic heating: thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on 5. Ultra-high temperature (over 49 °C), ultra-high temperature switch will automatically trip (power off) Parameter. Input voltage:220V 2. Current:13.6A 4. Note: COASTS thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installed. Package Included: 1 x 220V 2KW SPA Heater. Order may be cancelled due to insufficient of your information. Buyers from the following countries. Missing item or get wrong item or damaged items, or the item seams can not work well, please keep all the items in original condition, make all the items together with packing, then take some photos of them and send us the photos by message box. (2) How we will react? (sometimes you may be requested to return the incorrect item). (3) Valid time for returning. We promise to achieve your 100% satisfaction. Thank you so much for your kindness and understanding. The item “220V 2KW 13.6A Swimming Pool and SPA Heater Electric Heating Thermostat” is in sale since Friday, May 29, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “supergrowth” and is located in shenzhen. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • Brand: Unbranded
  • US Dom Ship: StandardShippingFromOutsideUS
  • Type: Bypass

Intex 28684 Electric Pool Water Heater 3KW 220V for swimming pool +thermometer

Intex 28684 Electric Pool Water Heater 3KW 220V for swimming pool +thermometer

Intex 28684 Electric Pool Water Heater 3KW 220V for swimming pool +thermometer

Intex 28684 Electric Pool Water Heater 3KW 220V for swimming pool +thermometer

Intex 28684 Electric Pool Water Heater 3KW 220V for swimming pool +thermometer

Within the specified days for processing. Pool water heater is an almost irreplaceable thing if your summer is not the hottest in the region and the night temperature drops below +20 ° C. In this case, during the day the water will not have time to warm up and it will not be very comfortable to swim. The question is especially acute if you have small children who catch colds easily. It is quite simple to use, easily mounted in frame and frameless models, and operates on a 220V network. Suitable for Easy Set pools and Metal Frame pools with a diameter of 244/305/366/457 cm. The water heater is placed in the circuit after the filter pump. This water heater is a flow-through type, therefore, it will not work without a filter pump that drives water through it. Connects to a filter pump (capacity from 2006 to 3785 l / h). Water temperature required for operation: from 17 to 35 ° C. Consumes: 3 kW / hour. It is connected in series after the filter pump with a capacity from 2006 to 3785 l / h. The pool water temperature should be between 17 and 35 ° C. Equipped with RCD (electric shock protection system), thermostat and water level indicator. Power – 3 kW (15A socket required). Hose connection hole diameter: 32 mm. Weight – 3.7 kg. The item “Intex 28684 Electric Pool Water Heater 3KW 220V for swimming pool +thermometer” is in sale since Thursday, March 18, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “vitgerkos” and is located in Rostov-na-Donu. This item can be shipped worldwide.
  • Model: 28684
  • Water Temperature Range: 95 °F
  • Power Source: Electric
  • Type: Heat Pump
  • MPN: 28684
  • Manufacturer: Intex
  • Power: 2501-3000 W
  • Brand: Intex
  • Suitable For: Above Ground Pools
  • Voltage: 220 V

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

Powerful Self-Priming IP55 2.5HP Electric Motor. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. Voltage:110V / 60Hz. Head:Max 19m / 62.34ft. 2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim. Inlet:1.5” Internal. Outlet:1.5” Internal. Pipe Compatibility:Fit 1.5 inch plumbing internally. Weight: 10.2 kg / 22.5 lbs. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. Max 19m / 62.34ft. 600 x 205 x 350mm/ 24 x 8.07 x 14inch (L x W x H). 10.2kgs / 22.5 lbs. D2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swimt be received within 7 days after auctions ended. Items are dispatched within 24 hours (except weekends and holidays). The item “2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim” is in sale since Tuesday, October 27, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “peesi888_8″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.
  • Type: SPP250E
  • Brand: Unbranded
  • UPC: Does not apply
  • Model: SPPE 250
  • Speed: 560 L/m
  • Horsepower: 1850W/2.5HP
  • Pool Type: SPP250E
  • Voltage: 110V / 60Hz
  • IP55 INS CL.: Max. 50 C
  • Amps: 16
  • Head: Max 19m / 62.34ft
  • Capacitor: 25 F
  • Inlet: 1.5” Internal
  • Outlet: 1.5” Internal
  • Noise Level: <65dB
  • Package Size: 600 x 205 x 350mm/ 24 x 8.07 x 14inch (L x W x H)
  • Weight: 10.2kgs / 22.5 lbs

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge

1500GPH Filter Pump keeps your pool water clean and crystal clear by filtering it and removing impurities and keeping bacteria from growing. Flow rate: 1500 gallons per hour. Integrated pool system flow rate: 1050 gallons per hour. Boasting a pump flow rate of 1500 gallons per hour and a system flow rate of 1050 gallons per hour, this pump will circulate and filter the water in your above ground pool to keep everything clean, refreshing, and fun. Adaptors included, Compatible with 1.25in/32 mm valves using the adaptors included, Work only with1.5in /38mm threaded valves. Pump Flow Rate Gal: 1500gal (5678L)/H. System Flow Rate Gal: 1050gal (3974L)/H. 1 1500GPH Filter Pump. The item “Electric 1500 GPH Filter Pump for Above Ground Swimming Pool 58390E+Cartridge” is in sale since Wednesday, May 27, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “idealwholesale66″ and is located in Los Angeles, California. This item can be shipped to United States.
  • Type: Filter Pump
  • Brand: Bestway
  • Suitable For: Above Ground Pools
  • Maximum Flow Rate: 1500 GPH
  • Recommended Pool Volume: 1500 gal
  • Voltage: 110 V

Bestway Electric Swimming Pool Heater Upto 15FT 2.8KW above ground

Bestway Electric Swimming Pool Heater Upto 15FT 2.8KW above ground

Bestway Electric Swimming Pool Heater Upto 15FT 2.8KW above ground

Bestway Electric Swimming Pool Heater Upto 15FT 2.8KW above ground

Bestway Electric Swimming Pool Heater Upto 15FT 2.8KW above ground

Bestway Electric Swimming Pool Heater Upto 15FT 2.8KW above ground

Bestway Electric Swimming Pool Heater Upto 15FT 2.8KW above ground

Bestway Electric Swimming Pool Heater Upto 15FT 2.8KW above ground

Specifications: 220-240V 50Hz, Class II. Maximum Heater Capacity 40C (104F). Certification CE / GS / EMC. Pool Compatibility All pools under 15. Plugs into a normal UK socket (EU plug, 13AMP UK adapter preinstalled). Ideal for 15ft pools or smaller Compatible with Bestway Sand & Filter Pumps Full detailed instructions included Heats between 0.5C & 1.5C p/h. Pool heater Hoses Clamp fittings. The RCD plug must be plugged into a grounded socket which goes directly into the mains supply. This should never be used with an extension lead. The pool heater will stop working if the filter pump is not in working condition. The Filter Pump should always be switched on first. How long will the pool heater take to heat the pool? This depends on the size of the pool you have. The pool heater heats the water by 0.5C-1.5C/h (1-3F/h) per hour. Does the heater need to be vertical or horizontal? The pool heater will need to be horizontal with the buttons facing upwards. Can you plug the pool heater into an extension lead? No, the pool heater should be plugged directly into a mains grounded socket. Which way round should the pool heater be connected. The arrow on top of the pool heater should point away from the filter pump. Reasons – Normally caused by an electrical issue. Solutions – Please ensure that the pool heater is plugged directly into a mains socket and not into an extension lead. Check the socket with other items to ensure the problem is not with the socket itself. Reasons – Caused by problems with the filter pump. Solutions – Please check Filter Pump section for troubleshooting steps. Reasons – Blockages in the hose. Solutions – Ensure all hoses are free from debris. Reasons – Can be caused by incorrect filter pump. Solutions – Check filter pump size and that this is connected properly. Reasons – Heater may be too small for the pool. Solutions – Check pool compatibility. Heater Light Not Working. Reasons – SolutionsProblems with the filter. Solutions – Check flow through filter pump. Reasons – Pool heater is too cold. Solutions – Check flow through filter pump and ensure there are no blockages in the hoses. Reasons – Hose connections. Solutions – Ensure that O-ring is correctly and securely in place. The item “Bestway Electric Swimming Pool Heater Upto 15FT 2.8KW above ground” is in sale since Friday, June 18, 2021. This item is in the category “Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “topixshop” and is located in UK. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.
  • Energy Efficiency Rating: G
  • MPN: C1_BW-PH28KW_001
  • Manufacturer: Bestway
  • Heating System: Electric
  • Power Source: Electric
  • Suitable For: Above Ground Pools
  • Water Temperature Range: 40 °C (104 °F)
  • Brand: Bestway
  • Voltage: 240 V
  • Features: Portable
  • Type: Heat Pump
  • Power: 2501-3000 W