Tag Archives: battery

Tempered Glass Solar Panel. Flexible Foldable Solar Panel. World-class quality START WITH DOKIO. Use it for your RV when camping, or during beach trips with the family, either way. It’s renewable energy that’s completely portable and so easy to use. DOKIO products are made by A grade raw materials, and all model have pass through TUV CE ISO Certification! 25-year Linear Performance Guarantee. DOKIO guarantees, over 25 years, that the modules performance. Will not decrease by more than 0.7% per year a distinct added value. Compared to the two-tiered guarantees usual in the industry. For more product introduction, syestem set up method and troubleshooting information, please check our Video Tips page. We offer complete residential and commercial solar kits for both on-grid and off-grid applications, including inverters, railing, and other system components. If you’re looking for a convenient and portable power solution, the. DOKIO 110W Solar Suitcase. Is a perfect choice! More power with the same portability! Uses our premium Eclipse panels to give you the most efficiency when charging your portable appliances. Featuring the same cells as our very popular 200W Solar Panel, you will have the highest efficiency DOKIO has to offer! This solar panel maximum packs. Of power under ideal laboratory condition which is only 0.2 inch thick and weighs only 3.1KG. Making it easier to transport, hang, and remove. E panel is well protected in a thick fabric pocket sewn. A practical carrying handle is available easy to carry and use and with, Ideal to use for ca. Hiking, picnic, charging your car battery, or in emergencies. With high efficiency monocrystalline solar cell, you will get greater power efficiency even though the panel is s. Maller than a traditio nal model. M aximizes system output by reducing mis. Match loss; 100% EL testing on all DOKIO solar modules, guaranteed no hot spots. FREE INVERTER SOLAR CONTROLLER for you (save 40 dollars). Just throw away your heavy battery, this controller can use without battery, one Dokio solar panel and. One Dokio new inverter controller meet everything. All items that have been re. Turned by a customer. There may be scratches on the surface as well as rust, bent corners, or other cosmetic damage to the frames, but this will not affect the performance of the products. All products listed have been thoroughly tested before being repackaged. Pictures may vary from the actual products received. Open box items might not come with the original packaging. DOKIO 110W Foldable Solar Suitcase. Maximum Power(Pmax):110W. Short-Circuit Current (Isc):6.35A. Maximum Power Voltage(Vmp):18.00V. Maximum System Voltage: DC1000V. Maximum Power Current (Imp):6.1A. Nominal Operating Cell Temp. (NOCT):-45 to 80. Open-Circuit Voltage (Voc): 22.5V. Weight: 3.1 kg. Dimensions: 710 x5302 x 5mm. Accessories:Cable, Solar Panel, Controller. Minor reduction in efficiency under partial load conditions at 25°C: at 100 W/m2, 95%- (+/-3%) of the STC efficiency (1000 W/m2) is achieved. If you there is any problem please send us a message and our Customer Service team will be happy to assist you. Please note that we won’t b. E able to process any order. With PO Box address for any size of solar panel. If your order arrives with app. If you later discover. Anything outside of this policy requires special authorization. High Performance & Versatile Application Anywhere. It can be curved to a maximum 30 degree arc, which makes it ideal for storage in tight spaces or crowded areas. This solar panel packs 100W of power. But it only weighs a mere 4.7lbs, making it easier to transport, hang and install. Short circuit and surge protection technology keep. You and your devices safe. It is not recommended to connect the solar panels in parallel, because it will cause over-current which may damage the product and the battery. It is not recomm. Ended to use more than 8 solar panels in series connection. Once the voltage exceeds 40V, an extra controller will be needed to protect the device being charged. Please handle the solar panel with care and avoid over-bending or bump, otherwise this may result in damage to the product. The plastic film is used to protect the panel, it may fall off during use, but it will not affect the solar panel. After long strong sunlight , leave the panel away from flammable materials, such as paper, fallen leaves and so on. 4 Holes on pa. Rilled for fast mounting and securing, perfect for non-permanent installations. The junction box on the panel is sealed and waterproof. Applicable for RV, boat, cabin, tent, yachts, car, trucks, trailers, etc. Installation and operation of solar cell module. Install PV module according to the following conditions. Ambient Temperature: 20 to 40. Operating Temperature: 20 to 80. Borne Snow Pressure: less than 2000Pa. Borne Wind Pressure: less than 3000Pa. Water proof: dont soak the PV module in water or continuously expose it to the sprinkling device or under fountains. Corrosion resistance: except for corrosive salt area and sulfurous area. Module shall be installed facing south (northern hemisphere) or north (southern hemisphere). Facing east or west may send only a relatively small amount of electric energy, and incorrect installing orientation will cause a loss in energy output. Series-connected PV module shall be installed in the same direction and with the same angle, because different directions and angles may cause loss of energy due to the differences of solar radiation. Installation of module shall avoid under shadows. Even though the module decreases loss of energy through bypass diode, the shadow will cause loss in energy output. Under normal circumstances, the module generates more current and voltage in routines than in the standardized testing conditions, therefore, please operate the configuration by multiplying 1.25 times of the short-circuit current and open-circuit voltage during the installation and application. The module must be installed on the roof with fire proof function. Connector for installation and connection needs to obtain the approved certification of connector (VDE V 0126-3). Junction box with the type required by the installation and connection needs to obtain the approved certification of junction box (2 PFG1162). Cables with the type required by the installation and connection need to obtain the approved certification of cables (2 PFG1161). When installing modules in batches, the interval distance between modules shall be larger than 100mm. Firstly, place the solar cell module with certain angle (generally 30° or 45°in horizontal plane), and choose a direction that can let the sunlight directly radiate the solar cell module for more time to place the module. Module and bracket shall be fully contacted with the ground. When installing modules, keep away from ignition source or fuels. Installation structure and bracket must bear external pressures such as wind pressure and snow pressure. Installation structure shall be environment resistant and chosen appropriate materials and preservative treatment. Method for high altitude installation shall be appropriate. High falling may cause death, disability and damages. It is forbidden to disassemble, bend, toss the module, nor shock it by hard objects or walk on it. Wire Connection and Precautions. Open the junction box, connect the red wire to the positive pole (+) and the black wire to the negative pole (-) and insert the other end to the interface of the solar cell wire of the battery cabinet. Fasten the module on the bracket by fastening piece and module mounting hole, the hardness and intensity of the fastening piece and module bracket must achieve the standard and be in accordance with relevant requirements. Use the private joint provided by the company. Note: short-circuit for positive and negative poles are forbidden. The joint shall be tightened without any clearances; otherwise, the clearances may cause sparks. Check if the fastening part of the installation structure is loosen; otherwise, it must be tightened. Often clear the dust and dirt on the surface of the PV module with soft cloth to prevent the loss in energy output due to the block on the surface of the module. Check frequently if the surface of the module is blocked by objects. Replace modules with the same specifications and the same type products. Be careful not to contact the exposed part of the wire or joint, and if it is necessary, wear the insulator such as tools, gloves, etc. During the process of installation and maintenance, be sure to cover the surface of the module with cloth or other light proof materials, because the module will generate high voltage under solar radiation which would be dangerous. Through the highest standards of European testing. Our strength guarantees quality and quantity. The item “110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery” is in sale since Tuesday, April 2, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels”. The seller is “dokio1985″ and is located in Edwardsville, Illinois. This item can be shipped to United States.

• Short-Circuit Current (Isc): 6.35A
• Number of Panels: 2
• Wattage: 110
• MPN: Does Not Apply
• Weight:: 3.1 kg
• Brand: DOKIO
• Dimensions:: 710 x530*2 x 5mm
• Type: Solar Panel
• Maximum Power Current (Imp): 6.1A
• Maximum Power(Pmax):: 110W
• Voltage: 18 V
• Open-Circuit Voltage (Voc): 22.5V
• Features: All Daylight Conditions
• Country/Region of Manufacture: China
• Materia: Monocrystalline Silicon
• Application: Camping/Hiking
• Maximum Power Voltage(Vmp): 18.00V
• Nominal Operating Cell Temp.(NOCT): -45 to 80
• Product Line: Sunny Boy