Category Archives: hayward

POWERFUL PUMP — This pool pump is quiped With IP55 1100W electric motor, high efficiency Impeller maximize flow and reduce noise, offers dependable performance, energy efficiency and quiet operation. Copper wire motor provides not only a more efficient, stable and safe operation, but also has a longer service life compared to ordinary motors. The powerful flow can achieve 6500 GPH and the maximum head lift can reach 51 ft. STURDY CONSTRUCTION — This 1.5HP Pool Pump is featured with commercial-grade reinforced thermoplastic shell and stainless steel motor housing, provides you with high-performance suction power and optimal flow. Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation system. Ideal for all-weather performance and quiet operation. The 100% drip proof, heat-resistant seal offers a long motor life. WIDE APPLICATIONS — The Single-Speed 1.5 HP Pool Pump is designed specifically for ABOVE GROUND and INGROUND pools. Designed a voltage-switch-button at the bottom of the motor, Compatible with 115V and 230V Dual Voltage, meet all your needs. HUMANIZED DESIGN — Equipped with a drain plug on the bottom which is easy for drainage and avoids water accumulation during winter, provides easy maintenance of pump. Extra-large filter basket with clear cover keeps pool maintenance to a minimum. Transparent cover helps to judge if the basket needs clean or not;The pool pump has built-in thermal overload protection and provides pressure protection, can withstand liquid temperature up to 140? Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process, generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise, pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1.5HP Dual voltage Swimming Pool Pump : 1. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Please contact our customer service team immediately if: 1. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “ticway-mechanical” and is located in this country: US. This item can be shipped to United States.

• Brand: TICWAY-MECHANICAL
• Type: Pool Pump
• Voltage: 110-120V/220V-240V
• Pool Type: In Ground &Above Ground
• Motor Shaft Material: Stainless Steel
• Pump Housing Material: PPGF30 + PC (anti-Oxident)
• Rated Power: 1100W/1.5HP
• Color: Black
• Amper: 10.8/5.4A
• RPM: 3450/min
• Horsepower: 1.5HP
• Speed: Single-Speed
• Qmax: 410 L/min
• Hmax: 15.5 Meter
• Frequency: 60HZ
• Max. Flow: 6500 GPH
• Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
• Power Cord: 59\
• Certification: UL Certification
• Warranty: Lifetime
• Material: ABS,PVC, Stainless Steel, Copper
• Model: 1.5HP
• Item Height: 11.4\
• Item Length: 22.4\
• Item Width: 9.6\
• Item Weight: 26lbs
• Installation: Universal Installation
• Features: Easy Installation, Portable, Single-Speed, Easy Assembly
• Amperage: 10A/5A
• Power: 1100W
• Water Type: All Water Types
• Internal Thread diameter: NPT 1.5\
• External Thread diameter: G2.25\
• Power Source: Corded
• Manufacturer Warranty: Lifetime
• Set Includes: Full Instructions,, Pump
• Energy Star: No complaint
• UPC: 0283961330595
• EAN: 0283961330595
• MPN: 4AZY8007
• Suitable For: Above Ground Pools