Calendar
Categories
Recent Search Terms
Tag Cloud
15hp 115230v automatic blue cartridge cell clean clear cord cover electric filter ground hayward heat heater in-ground inground intex jandy krystal ladder light liner motor pack panel pentair pool pools pump replacement salt sand series solar speed step strainer super swimming system valve variable water
Tag Archives: switch
Doheny’s Harris Pool Products Above Ground Swimming Pool Pump with On-Off Switch
THIS ITEM IS NOT AVAILABLE FOR SALE IN THE STATE OF CALIFORNIA! Stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability, with carborundum and graphite mechanical seals and components. Includes convenient on/off switch providing the ultimate in control. 115 Volts, with union connections for both suction and discharge ports and a convenient drain plug. Meets or exceeds all CSA and ETL requirements. Doheny’s Harris ProForce Above Ground Pool Pump with On/Off Switch These pumps are made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. The strainer includes a large, easy-to-clean filter basket. The see-through, twist and lock lid allows for quick viewing of the strainer. INCLUDES CONVENIENT ON/OFF SWITCH for the ultimate in control. 115 Volts, and has 1.5 inch connection sizes on both suction and discharge ports, 1.5 inch internal threading, 2.5 inch external threading, has a convenient drain plug and comes with standard three-prong plug connection on a 3 foot cord. Pump dimensions: 21 inches Length by 11 inches Height by 9 inches Width, 6.5 inches from Floor to Suction Port, and 7.75 inches from Floor to Discharge Hose. All items are brand new unless otherwise indicated. These rates apply to the lower 48 states only. Box and APO/FPO Addresses.
Control Board Kit Switch Pad For Pentair MasterTemp NA/LP 42002-0007S with 472610Z
Compatible with Pentair MasterTemp NA and LP Series pool and spa heater electrical systems. Also compatible with Sta-Rite Max-E-Therm NA and LP Series pool and spa heater electrical systems. Compatible with Mastertemp 400, Mastertemp 300, Mastertemp 250, Mastertemp 200, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805. No need for any complicated setup. Simply unscrewed the front and back panels, unscrewed the top, yanked all the connectors out and plugged into new board. Also install this membrane pad in minutes for attachment on end of pad makes installation easy. Direct replacement, Impossible to mess up, suitable for DIY. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System. Begin by removing the old circuit board by shutting down all power and opening the top of the heater tohave access to the old board. Unplug the membrane pad from the board and remove the wire connectors connected to the old board. Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out. Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater. A Damage caused by undue ware&tear, misuse, improper installation or operation, neglect, accidents. B Damage caused by natural disaters, flood fire, lightning or pollution. C If item was opened, any parts removed or repaired by any unauthorized person.
Comments Off
Posted in control
Tagged 42002-0007s, 472610z, board, control, mastertemp, nalp, pentair, switch
42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP
Fit for MasterTemp 200, MasterTemp 250, MasterTemp 300, MasterTemp 400, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805 and compatible with All NA and LP Series Pool/Spa Heater Electrical Systems. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System. INSTALLATION: First, remove the old circuit board by turning off all power and opening the top of the heater to access the old circuit board. Unplug the membrane pad from the board, then remove the wire connector attached to the old board. Satisfaction Guarantee–100% satisfaction guarantee. Compatible with Pentair MasterTemp NA and LP Series Pool and Spa Heater Electrical Systems, and for Pentair Sta-Rite Max-E-Therm NA and LP-Series pool and spa heater electrical systems. Made of quality material, professional PCB soldering, with anti-oxidation, heat, moisture resistance. 472610Z Switch Membrane Pad. 472610Z membrane pad fits for MasterTemp pool/spa heater electrical system switch membrane pad replacement. Replacing the switch membrane pad fixes the heating performance of the system. The buttons on the board are easy to use and their functions are clearly marked. Accurate hole alignment without covering the digital display and LED lights. A replacement can make your heater electrical system like new. Rebuild your Pool and Spa Heater Electrical Systems. Begin by removing the old circuit board by shutting down all power and opening the top of the heater tohave access to the old board. Unplug the membrane pad from the board and remove the wire connectors connected to the old board. Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out. Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater.
Comments Off
Posted in 42002-0007s
Tagged 42002-0007s, 472610z, board, control, mastertemp, nalp, pentair, switch
42002-0007S Control Board Kit with472610Z Switch Pad For Pentair MasterTemp NA/LP
Compatible with Pentair MasterTemp NA and LP Series pool and spa heater electrical systems. Also compatible with Sta-Rite Max-E-Therm NA and LP Series pool and spa heater electrical systems. Compatible with Mastertemp 400, Mastertemp 300, Mastertemp 250, Mastertemp 200, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805. No need for any complicated setup. Simply unscrewed the front and back panels, unscrewed the top, yanked all the connectors out and plugged into new board. Also install this membrane pad in minutes for attachment on end of pad makes installation easy. Direct replacement, Impossible to mess up, suitable for DIY. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System. Begin by removing the old circuit board by shutting down all power and opening the top of the heater tohave access to the old board. Unplug the membrane pad from the board and remove the wire connectors connected to the old board. Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out. Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater. Return will be aproved directly for orders bought by mistake. Exchanging or refunding is available for orders DOA or quality issue. We will try our best to serve to your satisfaction. Please do not leave bad feedback without noticing us the issue you encontered. Thanks for your understanding.
Comments Off
Posted in 42002-0007s
Tagged 42002-0007s, board, control, mastertemp, nalp, pentair, switch, with472610z
42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP
Compatible with Pentair MasterTemp NA and LP Series pool and spa heater electrical systems. Also compatible with Sta-Rite Max-E-Therm NA and LP Series pool and spa heater electrical systems. Compatible with Mastertemp 400, Mastertemp 300, Mastertemp 250, Mastertemp 200, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805. World-class advanced technology with high quality materials and high accuracy process. Provides high performance, high stability and long-lasting reliability. If your old Starite or Pentair Mastertemp Control Board no longer starts up your heater or the display no longer illuminated, or your pool heater is turning on by itself at random, maybe it is time to get a circuit board and membrane pad replacement! No need for any complicated setup. Simply unscrewed the front and back panels, unscrewed the top, yanked all the connectors out and plugged into new board. Also install this membrane pad in minutes for attachment on end of pad makes installation easy. Direct replacement, Impossible to mess up, suitable for DIY. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System.
Comments Off
Posted in 42002-0007s
Tagged 42002-0007s, 472610z, board, control, mastertemp, nalp, pentair, switch
42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP
Compatible with Pentair MasterTemp NA and LP Series pool and spa heater electrical systems. Also compatible with Sta-Rite Max-E-Therm NA and LP Series pool and spa heater electrical systems. Compatible with Mastertemp 400, Mastertemp 300, Mastertemp 250, Mastertemp 200, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805. World-class advanced technology with high quality materials and high accuracy process. Provides high performance, high stability and long-lasting reliability. If your old Starite or Pentair Mastertemp Control Board no longer starts up your heater or the display no longer illuminated, or your pool heater is turning on by itself at random, maybe it is time to get a circuit board and membrane pad replacement! No need for any complicated setup. Simply unscrewed the front and back panels, unscrewed the top, yanked all the connectors out and plugged into new board. Also install this membrane pad in minutes for attachment on end of pad makes installation easy. Direct replacement, Impossible to mess up, suitable for DIY. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System.
Comments Off
Posted in 42002-0007s
Tagged 42002-0007s, 472610z, board, control, mastertemp, nalp, pentair, switch
42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP
Fit for MasterTemp 200, MasterTemp 250, MasterTemp 300, MasterTemp 400, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805 and compatible with All NA and LP Series Pool/Spa Heater Electrical Systems. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System. First, remove the old circuit board by turning off all power and opening the top of the heater to access the old circuit board. Unplug the membrane pad from the board, then remove the wire connector attached to the old board. Satisfaction Guarantee–100% satisfaction guarantee. Compatible with Pentair MasterTemp NA and LP Series Pool and Spa Heater Electrical Systems, and for Pentair Sta-Rite Max-E-Therm NA and LP-Series pool and spa heater electrical systems. Made of quality material, professional PCB soldering, with anti-oxidation, heat, moisture resistance. 472610Z Switch Membrane Pad 472610Z membrane pad fits for MasterTemp pool/spa heater electrical system switch membrane pad replacement. Replacing the switch membrane pad fixes the heating performance of the system. The buttons on the board are easy to use and their functions are clearly marked. Accurate hole alignment without covering the digital display and LED lights. A replacement can make your heater electrical system like new. Rebuild your Pool and Spa Heater Electrical Systems. Begin by removing the old circuit board by shutting down all power and opening the top of the heater tohave access to the old board. Unplug the membrane pad from the board and remove the wire connectors. Connected to the old b. Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out. Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater.
Comments Off
Posted in 42002-0007s
Tagged 42002-0007s, 472610z, board, control, mastertemp, nalp, pentair, switch
42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP
Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System. Installation: First, remove the old circuit board by turning off all power and opening the top of the heater to access the old circuit board. Unplug the membrane pad from the board, then remove the wire connector attached to the old board. Made of quality material, professional PCB soldering, with anti-oxidation, heat, moisture resistance. 472610Z Switch Membrane Pad. 472610Z membrane pad fits for MasterTemp pool/spa heater electrical system switch membrane pad replacement. Replacing the switch membrane pad fixes the heating performance of the system. The buttons on the board are easy to use and their functions are clearly marked. Accurate hole alignment without covering the digital display and LED lights. A replacement can make your heater electrical system like new. We are duty off on weekends and other public holidays. International Buyers Please Note. If you need to return, please double check to make sure the item does not work and contact our customer service representative, let us know the detailed problem and send us some photos for confirmation. Then get a unique address to return. We only accept return for original package, please make sure the item has not been used or installed. We reserve the right to refuse any return for any request that does not meet these requirements. Best price, quality and service. Follow us and get more promotional news. Providing good customer service is our first priority. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Equipment Parts”. The seller is “angelcitytrading” and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Netherlands, Slovakia, Slovenia, Equatorial Guinea, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Kuwait, Liechtenstein, Benin, Algeria, Antigua and Barbuda, Swaziland, Italy, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Tajikistan, Vietnam, Malta, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Colombia, Spain, Estonia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, Canada, Turks and Caicos Islands, Chad, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Uganda, Luxembourg, Brazil, Turkey, Germany, Egypt, Latvia, Jamaica, South Africa, Brunei Darussalam, Honduras.
- Pool Type: Above-Ground
- Model: 42002-0007S, 472610Z
- Style: Modern
- UPC: 0768481539135
- EAN: 0768481539135
- Compatible Brand: For Pentair
- Brand: Pentair
- Type: Control Board Kit
- Item Height: 6 in
- Compatible Model: Pentair MasterTemp NA
- MPN: 42002-0007S
- Item Length: 6 in
- Item Depth: 6 in
Comments Off
Posted in 42002-0007s
Tagged 42002-0007s, 472610z, board, control, mastertemp, nalp, pentair, switch
42002-0007S Control Board Kit with 472610Z Switch Pad For Pentair MasterTemp NA/LP
Fit for MasterTemp 200, MasterTemp 250, MasterTemp 300, MasterTemp 400, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805 and compatible with All NA and LP Series Pool/Spa Heater Electrical Systems. Replacement NA and LP Series Pool/Spa Heater Electrical Systems & 472610Z Switch Membrane Pad Replacement MasterTemp Pool and Spa Heater Electrical System. INSTALLATION: First, remove the old circuit board by turning off all power and opening the top of the heater to access the old circuit board. Unplug the membrane pad from the board, then remove the wire connector attached to the old board. Satisfaction Guarantee–100% satisfaction guarantee. Compatible with Pentair MasterTemp NA and LP Series Pool and Spa Heater Electrical Systems, and for Pentair Sta-Rite Max-E-Therm NA and LP-Series pool and spa heater electrical systems. Made of quality material, professional PCB soldering, with anti-oxidation, heat, moisture resistance. 472610Z Switch Membrane Pad. 472610Z membrane pad fits for MasterTemp pool/spa heater electrical system switch membrane pad replacement. Replacing the switch membrane pad fixes the heating performance of the system. The buttons on the board are easy to use and their functions are clearly marked. Accurate hole alignment without covering the digital display and LED lights. A replacement can make your heater electrical system like new. Rebuild your Pool and Spa Heater Electrical Systems. Begin by removing the old circuit board by shutting down all power and opening the top of the heater tohave access to the old board. Unplug the membrane pad from the board and remove the wire connectors connected to the old board. Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out. Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Other Pool Equipment & Parts”. The seller is “singrysingry” and is located in this country: US. This item can be shipped to United States.
- Brand: Unbranded
- Pool Type: Above-Ground
- Type: Pool Parts
- Model: 42002-0007S
- Style: Modern
- MPN: 42002-0007S Control Circuit Board
- UPC: 768481539135
Comments Off
Posted in 42002-0007s
Tagged 42002-0007s, 472610z, board, control, mastertemp, nalp, pentair, switch
42002-0007S Control Board & 472610Z Switch Membrane Pad For Pentair MasterTemp
Compatible with Pentair MasterTemp NA and LP Series pool and spa heater electrical systems. Also compatible with Sta-Rite Max-E-Therm NA and LP Series pool and spa heater electrical systems. Compatible with Mastertemp 400, Mastertemp 300, Mastertemp 250, Mastertemp 200, SR200NA, SR333NA, SR400NA, SR200HD, SR333HD, SR400HD, 460805. World-class advanced technology with high quality materials and high accuracy process. Provides high performance, high stability and long-lasting reliability. If your old Starite or Pentair Mastertemp Control Board no longer starts up your heater or the display no longer illuminated, or your pool heater is turning on by itself at random, maybe it is time to get a circuit board and membrane pad replacement! No need for any complicated setup. Simply unscrewed the front and back panels, unscrewed the top, yanked all the connectors out and plugged into new board. Also install this membrane pad in minutes for attachment on end of pad makes installation easy. Direct replacement, Impossible to mess up, suitable for DIY. Made of quality material, professional PCB soldering, with anti-oxidation, heat, moisture resistance. 472610Z Switch Membrane Pad. 472610Z membrane pad fits for MasterTemp pool/spa heater electrical system switch membrane pad replacement. Replacing the switch membrane pad fixes the heating performance of the system. The buttons on the board are easy to use and their functions are clearly marked. Accurate hole alignment without covering the digital display and LED lights. A replacement can make your heater electrical system like new. Rebuild your Pool and Spa Heater Electrical Systems. Begin by removing the old circuit board by shutting down all power and opening the top of the heater tohave access to the old board. Unplug the membrane pad from the board and remove the wire connectors connected to the old board. Unscrew the 4 screws holding the board in place. This will allow you to take the old board completely out. Screw the board back in and plug the membrane pad into the connection that accepts the ribbon cable. Reconnect all of the wire connections and close out your master temp or max e therm heater. Absolutely Fast and Safe! The United States package usually takes about 2-4 days to reach you. The actual time depends on the distance between the destination and the warehouse and the schedule of the post office. International package usually takes about 7-20 days to reach you. We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 hours for us to response. Your understanding will be highly appreciated! This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “decoration-international” and is located in this country: US. This item can be shipped to United States.
- Brand: E-cowlboy
- Type: Control Board Kit
- Power Source: Electric, Natural Gas, Propane
- Suitable For: Mastertemp & Max-E-Therm
Comments Off
Posted in 42002-0007s
Tagged 42002-0007s, 472610z, board, control, mastertemp, membrane, pentair, switch