Before use, please adjust to the corresponding voltage for home use, and then fill the water pump with water before using it, otherwise the motor will be damaged. When adjusting the voltage, be sure to adjust after turning off the power. Otherwise the motor will be damaged. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and in ground pools clean. 1 x Water Pump. 2 x 1-1/2 NPT Inner coupling. 2 x 48.5 mm Inner coupling. Type:Swimming Pool Pump. Motor Shaft Material:Stainless Steel. Pump Housing Material: PPGF30+PC (anti-Oxident). Rated Power:1500W/2.0HP. Lnner/Outer coupling:1-1/2″NPT G2-1/4″. 2.0HP Dual Voltage Switch. 110V-120v/220-240V Dual Voltage Switch, Premium UL. 1.5 Inlet Fitting. Fits 1.5 male adapters for easy installation. The filter is designed with a removable oversized filter basket to filter debris.
This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. POWERFUL PUMP — This pool pump is quiped With IP55 1100W electric motor, high efficiency Impeller maximize flow and reduce noise, offers dependable performance, energy efficiency and quiet operation. Copper wire motor provides not only a more efficient, stable and safe operation, but also has a longer service life compared to ordinary motors. The powerful flow can achieve 6500 GPH and the maximum head lift can reach 51 ft. STURDY CONSTRUCTION — This 1.5HP Pool Pump is featured with commercial-grade reinforced thermoplastic shell and stainless steel motor housing, provides you with high-performance suction power and optimal flow. Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation system. Ideal for all-weather performance and quiet operation. The 100% drip proof, heat-resistant seal offers a long motor life. Type:Swimming Pool Pump. Horse Power:1.5HP. Flow rate: 6500 GPH. Suitable For:In Ground Pools&Above Ground. When pumping water: The pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping:The pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage. 2, Pump motor trip. 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor. 3, There is Water in The Pump. Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process, generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise, pump stop working. Clean up the waste inside the filter. Item located in California and New Jersey of Unites States of America, there are 2 warehouses. Except holiday, weekend, weather delay etc. Other states in U. Package sent from which above warehouse according to inventory stock quantity, and post address distance. Hope you understand and be patient. Usually, request would be agree in 24 hours. Item sent, request failed. If you have not received our reply in time, It may be our service officer is rest. All item passed FCC / CE / ROHS certificates. We work with good supplier who supply good quality materials and products and we have 2 factories producing most of our products, we are confidence to provide very good quality products with competitive price. We don’t cover the failure or damage caused by misuse, accident, modification, inappropriate physical or operating environment, natural disaster, power surge, and improper maintenance or storage.
2.5 HP Self Priming In-Ground Swimming Pool Pump Dual Speed 2″ and 1.5″ Inlet/Outlet 230V Energy Saving w/Strainer Basket. POWERFUL PERFORMANCE – Our premium pool pump designed to deliver exceptional power and performance; With a 2.5 HP super-power motor and a large impeller, this pump provides an incredible flow rate of 6240 GPH and a max head lift of 79 FT, ensuring your pool stays crystal clear; Compared to conventional motors, the copper wire motor is much safer, more stable, and more efficient when operating; A built-in E-POWER capacitor improves the power factor and achieves energy savings. STURDY CONSTRUCTION – The entire body is constructed with commercial-grade reinforced thermoplastic, which is highly corrosion-resistant, ensuring superior strength and durability; The pure copper motor with stainless-steel motor shell ensures the pump runs efficiently and safely and extended service life; The pump is IP54 waterproof and can withstand high-temperature liquids up to 104? (40?); It is also certified by ETL and DOE to ensure its safety and energy efficiency. DETAIL ORIENTED – This pool pump has two fittings in 1.5-inch and 2-inch, making it easy to install and use with most pools; It has a detachable extra-large filter basket for easy leaf and debris removal; A see-through lid for clear internal viewing and a spanner to remove the lid easily; The built-in automatic thermal overload protector prevents overheating, and two removable drain plugs help drain the water trapped in the housing to avoid damage from expansion frozen water. IMPORTANT NOTE – It is crucial to never turn on the pump without filling it with water beforehand, as this could cause harm to the mechanical seals and impellers; Therefore, please check if the pump is filled with water before switching it on; To do this, inspect the drain plug of the pump to ensure it is inserted properly; If it is, add more water to the pump. Any excess water will seep into the pipeline and help generate suction. Product and Package Information. Product Size:27.8×10.6×12.6 Inches. Package Size:30.5×11.2×14.2 Inches. Product Weight:44.8 lbs. Adapter Size:1.5″&2″. Package Weight:47.6 lbs. Applicable Scenarios:In/Above-ground swimming pools. Accessories:1.5″&2″ Outlet. Note:No power cord included. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. As a company based in California, We devote ourselves to offering top notch products at the most reasonable prices. From 2015, we have grown into a global enteprise that severs customers from all over the world. And we are glad to have you joining this big family. All we want for you is a easier and merrier life. Infinite Blessings and Love to YOU!
American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. InGround Swimming Pool Pump Motor w/ Strainer Generic Hayward Replacemen 1.5HP. WHY SHOP WITH FACTORY-SUPPLIES? Item was as described and arrived quickly. Swimming Pool Pump In/Above Ground. High efficiency & Low Noise & Heavy Duty Construction & Powerful Motor & Smoother Running & Long-term Use. This swimming pool pump is featured with commercial-grade reinforced thermoplastic shell and copper motor, provides you with high-performance suction power and optimal flow. Ideal for all-weather performance and quiet operation. Suitable for in/above ground pools and spas in all types and sizes. ?? Attention? The pump must be filled with water before use, otherwise it will cause damage to the mechanical seal and impeller. ?? 1.5HP Powerful Pool filter Pump? Equiped With IP55 1100W pure Copper wire motor that makes for more efficient and capable in pool cleaning. This industrial grade motor that is capable of exploding to a steady 3450 RPM round speed, The flow rate can reach 6340 GPH and the maximum head lift can reach 56 feet. Suitable for swimming pools up to 36×24 feet (average depth of 6 feet). ?? Dual Speed for Continuous Running? This variable speed pool pump offers two operating modes: High Speed and Low Speed, tailored to specific requirements. With high speed, it can pump&filter 105 Gallons of pool water in one minute. With low speed, pump moves up to 52 GPM but much lower power consume, energy saving. High speed at 105 GPM lifting up to 56 ft and low speed at 52 GPM lifting up to 13 ft. ?? Sturdy Construction? The full body is constructed with commercial-grade reinforced thermoplastic that resists corrosion, ensuring superior strength and durability. Easy start up fill pump with water upon first use to prevent motor from overheating, make sure the safety of application. What’s more, an earthing terminal is set to connect the line on the ground for an extra layer of security. ?? WIDE APPLICATIONS? Hitgrand 1.5 hp swimming pool pump is specifically designed for above ground and inground pools. Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation system. Advanced engineering features an impeller that maximizes flow, minimizes noise, and self-primes in an energy-efficient manner. Package includes: 1 x pool pump; 2 x 1.5 inch connector; 1 x manual. 2 pcs 1-1/2” NPT interfaces female thread for tool-free installation Transparent cover helps to judge if the basket needs clean. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Material: Plastic, Stainless Steel. Head Lift: 56 ft at High Speed;13FT at Low Speed. Power: High Speed1.5HP; Low Speed 0.36HP. Inlet: 1.5 NPT. Temperature: 140? /60? Power Cable: 5 ft. Max Head Up To: 56ft. 1.5 Dual Speed Swimming Pool Pump x 1. 1-1/2NPT Connectors x 2. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification.
Better price, Top Quality, expert Service support. Live demo of multiple products. Owned and operated company. Maintain a crystal clear and sparkling pool or spa that everybody loves with the new SPPE series self-priming 1850W electric swimming pool pump. Premium Material – Reinforced thermoplastic can resist the damage of chemicals in the swimming pool. Anodized Motor Body – Anti-corrosion anodized motor body prolongs its working life. Overloaded Protection – Prevents from overcurrent running that would cause overheating of the equipment. Huge Prefilter – The Strainer basket with internal ribs can filter out the debris and leaves that greatly reduce the frequency of cleaning and maintenance. Convenient Drain Device – Equipped with a drain plug on the bottom which is easy for drainage and avoids water accumulation during winter. Just revolve the stopper and pull it out. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. The installation must be according to the normal power indicated on the label. The amperage must not at any time exceed the value indicated on the label. It is recommended that you consult a state-registered electrician. Place the pump in a dry area with good ventilation. The ambient temperature must not exceed 40? The pumps are only suitable for counter-clockwise rotation when viewing from the pump end. Three phase motors can rotate in either direction. Interchanging any of the cables on a three-phase motor will reverse the rotation. Momentarily start, or bump the motor without water in the tank, to check the rotation of the pump shaft. Before disconnecting electrical connections, shut off electricity at its source. Newer work on pump without making certain the power is OFF. This appliance is not intended for use by persons, including children with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Voltage : 110V / 60Hz. Head : Max 19m / 62.34ft. Diameter of white connector : 48.5mm/54.5mm. Pipe Compatibility : Fit 1.5 inch plumbing internally. Weight : 10.2 kg / 22.5 lbs. Powerful Self-Priming IP55 2.5HP Electric Motor, low noise with quiet operation and no leak. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. SPPE250 Swimming Pool Pump X 1. White Connector X 2. User’s Manual X 1. All items are dispatched from our warehouse in CA, NJ, AL. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. We never want our customers to wait for parts, we have plenty of parts available for every product. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification.
For more information on our products. Please send message to us. InGround Swimming Pool Pump Motor w/ Strainer Generic Hayward Replacemen 1.5HP. What Customers Have To About Us. ” Delivered as promised and item is as described “. Just what i was looking for. Had a problem-was able to successfully resolve it. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. POWERFUL PUMP — This pool pump is quiped With IP55 1100W electric motor, high efficiency Impeller maximize flow and reduce noise, offers dependable performance, energy efficiency and quiet operation. Copper wire motor provides not only a more efficient, stable and safe operation, but also has a longer service life compared to ordinary motors. The powerful flow can achieve 6500 GPH and the maximum head lift can reach 51 ft. STURDY CONSTRUCTION — This 1.5HP Pool Pump is featured with commercial-grade reinforced thermoplastic shell and stainless steel motor housing, provides you with high-performance suction power and optimal flow. Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation system. Ideal for all-weather performance and quiet operation. The 100% drip proof, heat-resistant seal offers a long motor life. WIDE APPLICATIONS — The Single-Speed 1.5 HP Pool Pump is designed specifically for ABOVE GROUND and INGROUND pools. Designed a voltage-switch-button at the bottom of the motor, Compatible with 115V and 230V Dual Voltage, meet all your needs. HUMANIZED DESIGN — Equipped with a drain plug on the bottom which is easy for drainage and avoids water accumulation during winter, provides easy maintenance of pump. Extra-large filter basket with clear cover keeps pool maintenance to a minimum. Transparent cover helps to judge if the basket needs clean or not;The pool pump has built-in thermal overload protection and provides pressure protection, can withstand liquid temperature up to 140? . SECURITY ASSURANCE — This Swimming Pool Pump has a UL Certification to ensure recognized standards for safety. Easy start up fill pump with water upon first use to prevent motor from overheating, make sure the safety of application. What’s more, an earthing terminal is set to connect the line on the ground for an extra layer of security. Any problems about this product will be given best solution in 24 hours. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes. 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor. 3, There is Water in The Pump. Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process, generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise, pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. 104 Degree Fahrenheit (40 Degree Celsius). 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. 25 years Industry Experience.
American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. InGround Swimming Pool Pump Motor w/ Strainer Generic Hayward Replacemen 1.5HP. WHY SHOP WITH FACTORY-SUPPLIES? Item was as described and arrived quickly. 5 HP Dual Watt In/Above Ground Swimming Pool Pump. High efficiency & Low Noise & Heavy Duty Construction & Powerful Motor & Smoother Running & Long-term Use. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process, generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise, pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1.5HP Dual voltage Swimming Pool Pump x 1. 1-1/2NPT Connectors x 2. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification.
Introducing the AQUASTRONG 3HP In/Above Ground Single Speed Pool Pump, perfect for your swimming pool needs. This standard pool pump has a corded power source with a voltage of 220V and a minimum pump power requirement of 3 hp. It also features a single-speed and timer, making it easy to use and maintain. Suitable for both above ground and in-ground pools, this pool pump is a reliable and efficient choice for your pool equipment and parts. With a maximum flow rate of 9350GPH, it can effectively clean and maintain your pool’s clarity. The AQUASTRONG brand is known for its quality and durability, making it a great investment for your pool enthusiasts.
Ft Pool Cartridge Filter System. Glass Fiber Polypropylene Shell & 2 Unions & Good Airtightness. The pool filter is glass fiber polypropylene material with a polyester cartridge, air relief valve, and gauge for efficient pool water purification. The filter comes with 2 unions for easy installation. You and your family will have clean, refreshing, and cool water fun with the help of this pool cartridge filter. Auto Pressure Relief Device. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. The cartridge adopts polyester material to maximize the water flow and effectively filter the sand, grease, odor, leaves, hairs, etc. Meanwhile, it is not easily deformed and fits backwash for a long service time. The filter enclosure is made of glass fiber polypropylene material, sturdy and corrosion-proof. The ring lock allows you to open the filter and clean the cartridge easily without screws troubles. In addition, the O-ring strengthens the airtightness of the filter. Auto Pressure Relief Design. The pool filter is equipped with a PVC air vent pipe, pressure relief valve, and a pressure gauge for emptying the excess air automatically and saving the filter from a burst. The pressure gauge allows you to examine the pressure inside the filter precisely. The cartridge filter comes with 2 unions, which can be connected to the water inlet and outlet ideally for easy installation. A plug and a manual are also included for convenient use. The pool filter features its professional construction and configuration, including a pressure relief kit, premium filter cartridge, and corrosion-proof design to ensure a high-efficient function and prolonged use. The pool cartridge filter is suitable for water purification of in-ground swimming pools, above-ground swimming pools, and even inflatable swimming pools. So you can enjoy the clean, refreshing water fun this summer. Housing Material: Glass Fiber Polypropylene. Cartridge Material: Polyester Fiber. Filter Area: 50/100/150/194 sq. Maximum Water Flow: 3000/6000/8800/8000 GPH. Filter Height: 22.3/36.5/43.6/52 in. Filter Diameter: 8.9 in. Cartridge Height: 14.4/28.5/35.6/42.9 in. Cartridge Diameter: 7.2 in. Water Inlet/Outlet Diameter: 1.5/2 in. Product Weight: 16.1/22/26.5/33.1 lbs. 1 x Pool Filter. 1 x Filter Cartridge. 1 x Pressure Gauge. Here we will provide you with four types of pool cartridge filters with different filter areas for your option: 50 sq. Polyester Filter Cartridge: The high-density polyester filter cartridge with 14/22/33/30 m³/h maximum water flow, which is not easily deformed and convenient to backwash for reuse, can absorb grease, filter dust, block leaves, and hairs, and eliminate odors effectively. Note: Regular cleaning can extend the cartridge’s service life. Durable Filter Housing: The filter housing is made of glass fiber polypropylene material, injection-molded, durable, and corrosion-proof for long service life. At the same time, the ring lock design of the cover can spare the troubles of screws, and you can open the cap and replace the filter element easily. In addition, the imported O-ring can ensure good air-tightness. Auto Pressure Relief Device: The pool filter is equipped with a high-precision pressure gauge, allowing you to know the pressure in the filter at all times. The user-friendly automatic pressure relief valve empties the air trapped in the filter automatically to prevent excessive pressure. Easy Installation: The swimming pool filter has two water inlets and a water outlet, including 2 unions for easy installation. One of the water inlets can be plugged with the plug, the other water inlet can be connected to the pump, and the water outlet to the swimming pool for water purification. Wide Application: The pool cartridge filter has a wide range of uses. It is suitable for water purification of in-ground swimming pools and above-ground swimming pools, even inflatable swimming pools. There is no doubt that the pool filter will bring you and your family a clean, refreshing, and pleasant summer. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours.
2.5HP 1850W Swimming Pool Pump. High-Efficiency Copper Motor & Security Design & UL Certification. The swimming pool pump is equipped with a pure copper motor, high efficiency, and low noise, serving you for a long time. Furthermore, the pump shell is made of premium ABS and aluminum material, sturdy and corrosion-proof, without water leakage. In addition, it is certified with UL certification, suitable for swimming pools, spas, bathing tubs, etc. Premium Swimming Pool Pump. 2.5 HP Copper Motor. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. The pool pump adopts a pure copper motor to achieve high efficiency and long service time. Power: 1850W/ 2.5 HP, Voltage: 110V / 60Hz, Amps: 16 A, Capacitor: 25 F. Our pool pump is suitable for pools up to 100,000 liters, which can meet your daily needs. Head Lift: 62.34 ft, Max. It is certified with UL certification. Silent & Secure Design. The pool pump will not disturb you when working; noise level. The swimming pool pump features a detachable filter basket for filtering debris in the water, such as hairs, leaves, gravels, etc. So you can enjoy crystal limpid water fun and relax. Aluminum & ABS Casing. The casing of the pump adopts solid ABS and aluminum material, sturdy and corrosion-proof. In addition, the housing is sealed by an industrial process without water leakage, keeping the motor and internal device intact. The in-ground pool pump has a wide application for many occasions. For example, you can install it in a swimming pool, bathing pool, landscape pool, spa tub for efficient crystal clear water circulation. Voltage: 110V / 60Hz. Head Lift: 19 m / 62.34 ft. Inlet: 1.5”/3.8 cm Internal. Outlet: 1.5”/3.8 cm Internal. Product Size: 25.6 x 6.7 x 13.4 in / 65 x 17 x 34 cm. Weight: 22.5 lbs/10.2 kg. 1 x Swimming Pool Pump. 1 x User’s Manual. Premium Swimming Pool Pump: The self-priming pool pump has brilliant performance with UL, CE, FC certification. It is suitable for pools of up to 100,000 liters and can serve you for long time. 2.5 HP Copper Motor: The swimming pool pump is equipped with a pure copper motor for high efficiency, low noise, and long service time. Superior Performance: The pool pump adopts an S-Tek flow system with a maximum head lift of 62.34 ft and a maximum flow rate of 560 L/min. In addition, the filter basket in the pump can effectively filter debris in the water to provide clean water, such as hair, leaves, gravels, etc. Secure Design: The housing of the pump is made of sturdy ABS and aluminum material, durable and corrosion-proof, preventing the motor and internal device from damage. Moreover, the pump is designed with a built-in thermal protector and automatic pressure control for security. Versatile Uses: The in-ground pool pump can be used on many occasions for providing high-efficiency water circulation and crystal clear water, such as swimming pool, bathing pool, landscaped pool, spa, etc. People Who Bought This Item Also Bought. VEVOR Swimming Pool Pump 2 HP Filter Pump 90 GPM w/Strainer Above Ground. VEVOR 1.5HP Pool Pump Swimming Pool Pump 4980GPH In/Above Ground Pool Pump 1.5. VEVOR Swimming Pool Pump 1-1.5HP 2-Speed w/Strainer Filter Pump In/Above Ground. VEVOR Swimming Pool Pump 2HP 2-Speed Filter Pump w/Strainer for In/Above Ground. VEVOR Sand Filter Above Ground with 3/4HP Pool Pump 3000GPH Flow 14 6-Way Valve. VEVOR Swimming Pool Pump 1.5 HP 88 GPM w/ Strainer Filter Pump In/Above Ground. VEVOR Sand Filter Above Ground with 1 HP Pool Pump 3500 GPH Flow 16 6-Way Valve. VEVOR Deep Well Pump 4 1.5HP Submersible Pump Max 390′ Head w/ 131 ft Cable. VEVOR Macerator Disposal Pump Basement Macerator Pump 350W with 3 Water Inlets. VEVOR 12V Water Pressure Diaphragm Pump Self-Priming Pump 70 PSI 5.5 GPM Boat RV. VEVOR 1/2HP 4 Deep Well Pump Submersible Stainless Steel 164FT 25.5GPM 110V. VEVOR 12V Water Pressure Diaphragm Pump Self-Priming Pump 55 PSI 3.5 GPM Boat RV. VEVOR Sand Filter 16 Above Inground Swimming Pool Sand Filter with 7-Way Valve. VEVOR 110V Water Pressure Diaphragm Pump Self-Priming Pump 45 PSI 3.3GPM Boat RV. VEVOR Shallow Well Jet Pump 0.75 HP 18.5 GPM w/Pressure Switch Stainless Steel. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. 27.9 ft/8.5 m. 32.8 ft/10 m. 19 m / 62.34 ft. 1.5/38 mm Internal. 55.8 ft/17 m. 41 ft/12.5 m. 36 ft/ 11 m. 34 ft/ 10.5 m. 122 °F/ 50 °C. 7.4/3.7 A. NPT 1-1/2/ 3.8 cm. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours.
