? Welcome??? We are committed to providing customers with better and more favorable products!!! Thank you for your support. Swimming Pool Heat Exchanger 200 kBtu/hour 1″+1 1/2″ FPT 304 Stainless Steel. The swimming pool heat exchanger is made of high-grade anticorrosive stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2″ FPT is used on one side of the swimming pool water, and 1″ FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 200 kBtu/hr. It gets hot immediately without waiting. This kind of heat exchanger is a very safe, reliable, efficient and cost-effective way to heat swimming pools or spas through any hydraulic system. The heat recovery pool heater is very suitable for swimming pools, spas, hot tubs, solar, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Material: 304 stainless steel. Heat transfer area: 4.8 square feet. Hot water flow rate: 30 L/min. Cold water flow: 250 L/min. Side of hot water pipe: 1 FPT. Same side port: 1 1/2 FPT. Product Size: 48.514cm/19.095.5inch. 1 x stainless steel heat exchanger. 2 x fixed bracket. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 11.5lbs(5.2kg). Gas / Wood / Solar / Heat Pump / Electricity. Hot Water flow rate. Side of hot water pipe. 4.8 square feet. 100,001-350,000 BTUh.
Product description:? The swimming pool heat exchanger is made of high-grade anticorrosive stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2″ FPT is used on one side of the swimming pool water, and 1″ FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 200 kBtu/hr. It gets hot immediately without waiting. Swimming Pool Heat Exchanger 200 kBtu/hour 1″+1 1/2″ FPT 304 Stainless Steel. NEW Swimming Pool Heat Exchanger 304 Stainless Steel 200 kBtu/hour 1″+1 1/2″ FPT. The heat exchanger is made of 304 stainless steel, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. It is safe to use because it does not catch fire, leak, burn during operation. Great Durability: The heat exchanger is made of 304 stainless steel, which is durable and has a long service time. Ensuring Constant Temperature: The heat exchanger can ensure constant temperature, transferring heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Fast Heating: It is based on a temperature difference of 60°C (140°F) between incoming water and hot water, providing 200 kBtu/hr of freshwater. Therefore, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. Safe to Use: It is safe to use because it does not catch fire, leak, burn during operation, which brings great reassurance to you. More Water-saving: It does not waste water during operation and tries to make the best use of every drop of water, so it is more water-saving. Easy to Clean: You can easily clean it without much effort and time because of its smooth surface and fewer gaps. Wide Application: It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc. It is used in spas, swimming pools, spas, hot tubs, etc. Threaded Connection Ports: The heat exchanger has four threaded connections ports that can connect other tubes more firmly and tightly, which is uneasy to fall off and affect the heat transfer. 304 Stainless Steel: The heat exchanger is made of 304stainless steel so that it is rustproof and saltwater resistant. Therefore, it is suitable for chlorine or saltwater pools and spas. It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Material: 304 Stainless Steel. Heat Transfer Area: 0.45m²/4.8ft². Hot Water Flow Rate: 30L/Min (8L/Min). Cold Water Flow: 250L/Min (66L/Min). Side of Hot Water Pipe: 1inch FPT. Same Side Port: 1 1/2 FPT. Packing Size: 541919cm/217.57.5inch. Product Size: 6014cm/23.65.5inch. Connection Port Diameter: 3.8cm/1.5inch, 2.54cm/1inch. Weight: 5.2kg/11.5lbs. The product needs basic assembly. Professional would be highly recommended. 1 x Stainless Steel Heat Exchanger. 2 Sets x Fixed Brackets. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Thank you very much for your orders. I hope our productsmet your expectations. As always, we are happy to support you with anyfuture projects you may undertake. I wish you thebest with your current project and look forward toseeing the outcome. Thank you again, and I lookforward to working with you in the future. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
Powerful 1 HP Pool Pump: Our swimming pool pump features a 3250 RPM copper wire motor that maximizes flow and minimizes noises. Power: 750 W; Dual Voltage: 110 V/ 220 V; Water Head Lift: 34 ft; Max. Water Flow: 5544 GPH. Tested to UL Standards. Stable Flow & Easy Clean: The 1 hp pool pump is suitable for max. Its airflow ventilation ensures a constant and sanitary water circulation. Also, it is equipped with an extra-large filter basket that is detachable for easy cleaning, while the transparent lid helps you maintain in time. Sturdy Construction: The whole body of the in-ground pool pump is constructed with commercial-grade reinforced PP plastic, ensuring superior strength and non-leakage durability. 2 Interfaces Included: 2 of 1-1/2′ NPT interfaces for hassle-free installation to fit the water inlet and outlet of this ground pump; the power cord is 2.9 ft in length, long enough to suit different sizes of pools. Note: Please fill the pump with water to keep the motor from overheating for the first use. Wide Application: Ideal for in-ground and above-ground pools, hot tubs, thermal springs, spas, etc. The pool pump will bring you a clean and clear water environment to enjoy your leisure time. Dual Voltage: 110 V / 220V. Power: 750 W/ 1 HP. Motor Speed: 3250 RPM. Head Lift: 34 ft/ 10.5 m. Connector Size: NPT 1-1/2”/ 3.8 cm. Water Temperature: 122 °F/ 50 °C. Power Cord Length: 2.9 ft/ 0.91 m. Suitable Pool Capacity: 5933 cu. Item Size: 21.8 x 9.9 x 11.5 in/ 555.5 x 251 x 292 mm. Item Weight: 26.5 lbs/ 12 kg. 1 x Swimming Pool Pump. 2 x 1-1/2” NPT Interface. 1 x User Manual.
LED LARGE 10.25 (APROX) 66. FT CORD LED POOL LIGHT bright White. You will need a step down transformer if your power box does not have one (usually FL and CA have on already by state Law). Thick cord connected to OEM direct fit Epistar LED pool light rated at over 70,000 hours! 12v version if you are running 120V you will need a simple step down from 120v to 12v from power box. Much safer than running 120v into the pool. Many states are passing the Law 12v into the pool. The brightest and most efficient LEDs available. Custom reflector and lens eliminate glare and hot spots. Wide angle light position for greater underwater coverage or narrow angle for increased light intensity and distance. Superior lens geometry and exclusive reflector design combine to create a wider beam and more uniform light distribution. Ideal for both residential and commercial pools. Compatible with any standard stainless steel and plastic niches. 12v version if you are running 120V you will need a simple step down from 120v to 12v from power box much safer than running 120v into the pool.
Condition: 100% Brand New. Item Length:5.5 in. Item Height: 7.5 in. Color:show as pictures. Product Benefits:Non-Toxic, Extra Cleaning Power. The TurboCell Replacement Salt Cell for in-ground pools up to 15,000 gallons delivers silky smooth, naturally sanitized water that won’t irritate eyes, dry out skin or cause fabrics to fade. Cuts chlorine costs by up to 50% for major savings season after season. Compatible with the following Hayward salt chlorination systems: AquaRite, AquaRite Pro and SwimPure Plus. Swimming Pool Salt Chlorine Generator For Hayward W3T-CELL-3 15,000 Gallons. 1×15,000 Gallons W3T-CELL-3 Salt Chlorine Generator. Non-Toxic, Extra Cleaning Power. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. Weed & Pest Control. Plant Care & Soil Accessories. Ropes, Cords & Slings. Pool Equipment & Parts. Hardware Cloth & Mesh. B2853 1HP 230/115V Single Speed Square Flange Pool Pump Motor. Fit for Hayward W3T-Cell-15 Salt Chlorination Cell In-Ground Swimming Pool. W3T-CELL-9 Salt Chlorination Cell 25000 Gallons for In-Ground Swimming Pool. Square Flange Pool Motor Replacement Pump Motor 1.5HP B2854 B2854V1 56Y. USQ1152 Square Flange Single Speed 1.5HP 48Y Pool Motor ASQ165 EUSQ1152. For Hayward GLX-CELL-5 Salt Chlorination Cell In-Ground Swimming Pool 20000 gal. 1320GPH 1.6HP 115V Shallow Well Booster Jet Stainless Steel Irrigation Pump. 1 inch Hardware Cloth Welded Wire Mesh Chicken Wire Poultry Fence Mesh Roll. For W3SP1580X15 Above Ground Swimming Pool 1.5 HP Standard Pool Pump with Cord. R0536400 For Polaris New Style PB4-60 Booster Pump Impeller Pool Cleaner Part.
Fit For the Following Models. For Above Ground Pool. Please leave us your full name, your telephone number and detailed address when ordering. We try our best to pack the products as good and safe as possible, so they always arrive in a good condition. We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price. With these parts you can replace your defective parts simply plug and play. 24 months without mileage limitation. Please compare carefully with Photos or OE number before purchasing the part.
Always pay attention before use!!! Before use, please adjust to the corresponding voltage for home use, and then fill the water pump with water before using it, otherwise the motor will be damaged. When adjusting the voltage, be sure to adjust after turning off the power. Otherwise the motor will be damaged. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Durable Corrosion -Stainless Steel 2.0 HP Shaft, the shaft is constructed with a reinforced thermoplastic body for longer life and durability. The sand filter is made of PPGF30 + PC, 100% drip proof, effective insulation and protection against pool chemicals, heat-resistant double-sized seal for long motor life. POOL PUMP-This self-priming heavy-duty pump delivers outstanding performance and reliability at a fantastic price and costs less than big name brands. The mighty force of this pump makes it efficient and an economical choice. UL Certified- This Swimming Pool Pump has a UL Certification to ensure recognized Standards for Safety. Type: Swimming Pool Pump. Motor Shaft Material: Stainless Steel. Pump Housing Material: PPGF30 + PC (anti-Oxident). Rated Power: 1500W/2.0HP. Inner/Outer coupling: 1-1/2”NPT G2-1/4′. 1 x Water Pump. 2 x 1-1 / 2”NPT Inner coupling. 2 x 48.5mm Inner coupling(free gift).
