Tag Archives: water

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Water Jet Laminar Color LED Light stays inside a stream of water pool pond

Amazing Optical Laminar Water Jet. Cool laminar effect with a light thru the water stream. Color Changing Light cycles thru water stream for an amazing effect. I use one in my pool and its awesome at night. This is new redesigned water jet for 2019. You can use without the lights during the day, just keep the light unplugged. What do you need? A hose or plastic tube (read below). A clean water source (usually a pool) You can use a pond but you will probably need to open the water jet more frequently to rinse the internal filters unless your pond is really clean. Some of the questions I have received about this I will answer here. This is a color changing light that stays inside the water stream. There is no remote control. You cannot keep it on one color nor can you change the pattern of colors, it cycles automatically. In the future we may have single colors available or remote controlled lights that can be used to make patterns but as of today we do not. Light stays inside the water stream!! .. Looks like its in a tube but its not! You can run your hand through the stream and “light” up your hand as the water hits it!! Looks great in a pool or pond! Lights up the pool water where it hits (not sure about ponds as pool water is very clear). What you will get. The laminar water jet. 33′ feet of cable with a plug in transformer (for the light). The pump: I can sell you a pump. You are better off getting your own pump locally if you can. You can use a ball valve to control the flow rate to the water jet because if you exceed the 8 to 9 foot max stream the light will start to fade. The pump I sell has a flow rate of about 1056 GPH The pump I sell assumes you are using about 10 feet of tubing. The further away the water jet , the longer the tubing, the more pumping power you need. PLEASE THINK THIS THROUGH! You dont want to have to little, and you do not want to have too much. An adjustable flow rate pump is one suggestion, another is a tee with a ball valve A tee is connection that allows water to flow in 2 directions.. What I do is I have a tee.. One side goes into my pool, the other to my water jet. When my ball valve is CLOSED, all the water goes into my POOL. When I start OPEN my ball valve some of the water starts to flow to my water jet. When I find the sweet spot (usually around 3/4 open) my water jet shoots a perfect water stream. And thats the trick.. You cannot send to much water into the water jet or you will not get a prefect stream, it will break up. A clear or braided 1 (1 inch) plastic tubing to run from the pump to the water jet. The water jet will shoot about 8 feet before it starts to lose the light, any longer stream and the light will not travel the entire distance. So figure 6 to 10 feet of tubing depending on where your body of water is and where you set the angle/arc of the jet. Of course you can go longer with the tubing, but keep in mind the further you go the more pump power you will need to get the water flow right. For example if you pump from 50 feet away to the this device you will need a higher flow rate. How does it work? Connecting one end of a hose to the water jet intake, another end to a water pump, water from pump goes through the jet and shoots back to the pool or pond. You can adjust the angle of this water jet to achieve a higher or lower jet stream. Amazing total internal reflection of light in a circle water jet. A jet of water “traps” light, just like an optical fiber. Connecting to a pump (included), this optical water jet can shoot up to 8′ across and is still keeping in shape and clear like a glass tube. Light travels from the jet LED source all way to the touching down splashing spot without loosing much light. The water jet comes with a 5W LED light which runs on AC 12V (low voltage). The jet itself needs no electric power (other then the pump to bring the water to it) to shoot and can be run in the daytime to shoot a clear stream. The cord for the LED light will be about 33 feet long so you have plenty of options on where to plug it in when you want to run it at night. Quality: The housing is made of a low rated stainless steel. The top has screws that can be used to open the unit to wash and rinse out the inside filters if necessary and to change the LED light (unlikely since LEDs last a long time). You will need place the pump inside body of water, if its in a pool, you can hang the pump from the ledge, but please do not swim while a pump is pumping from inside your pool , its not worth the small chance of a malfunction and electricity flowing directly in a pool while you or your loved ones are swimming! You can also place the pump inside a plastic bucket and let the bucket sit on the bottom of your pool – if you have a vinyl liner this is the best bet so that the pump does not “pull” on your liner. If you are handy then you can hook this up to your existing pool pump system, but this will require extra effort on your part. That is what I did with my pool, using. Ball valves and tee’s (all from Home Depot) I now use my 1 HP pool pump to operate the water jet. Using ball valves I can adjust the flow rate from my pool pump to the water jet while also filtering the pool. When I do not want to use the jet I redirect the pump flow to filter the pool. If you think it through it is really quite easy to achieve. Basically you want to able to control the flow rate to the water jet – if you send to much flow (pressure) it will probably blow off the hose connection and if it doesnt the jet stream will be too long -you need to control this when tying into your pool pump system – thus the ball valves (for my pool I use about 50/50 ratio – that is half the water to the jet and the other half back into the pool). If you think it through and plan it out its not difficult. You can hide this behind a shrub or under a deck, the possibilities are endless. I have my own water jet behind my pool so all you see is a stream of color changing water, you don’t see the unit at all! This braided tubing works great, flexible yet strong enough and fits the 1 connection on the pump and the jet, I bought the tube in Home Depot by the foot. The item “Water Jet Laminar Color LED Light stays inside a stream of water pool pond” is in sale since Sunday, April 12, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Ponds & Water Features\Outdoor Fountains”. The seller is “regal88″ and is located in New York, New York. This item can be shipped to United States.
  • Material: Stainless Steel
  • Theme: Laminar
  • Power Source: Electric
  • Color: Silver
  • MPN: Does Not Apply
  • Brand: Unbranded

BESTWAY 58259 Electric Swimming Pool WATER HEATER 2.8KW Above Ground up to 15FT

BESTWAY 58259 Electric Swimming Pool WATER HEATER 2.8KW Above Ground up to 15FT

BESTWAY 58259 Electric Swimming Pool WATER HEATER 2.8KW Above Ground up to 15FT

BESTWAY 58259 Electric Swimming Pool WATER HEATER 2.8KW Above Ground up to 15FT

Electric Swimming Pool HEATER +. Increases the temperature of the water of the swimming pool of about 0. 5-1.5 Degree (h) 1-3 °F /h. And on the basis of the total volume of water max output; of Heater: 40 °C (104 °F). Compatible with:-pools: 4.57 m (15′) and smaller. Ideal for use with pools 15 feet or smaller. Must be used in conjunction with a filter pump or sand filter with a flow rate of up to 3,785 L/h (1,000 g/h) (not supplied). Volume of water of the swimming pool: 400 1.520 17.000 L 4.500 gal. Flow filter pump/Sand Filter: 3.785 L/h, 1000 gal/h and lower 3.785 L/h, 1000 gal/h. 220-240 V, energy: 2,800 W at 20 degrees. Cable length: 4 m approximately. Dimensions (height x length x depth): 25 x 48 x 29 cm. The item “BESTWAY 58259 Electric Swimming Pool WATER HEATER 2.8KW Above Ground up to 15FT” is in sale since Thursday, June 24, 2021. This item is in the category “Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Pool Equipment & Parts\Pool Pumps”. The seller is “gp_ltd” and is located in Spalding. This item can be shipped to United Kingdom, United States, Japan, Canada, Ireland, Australia, Germany, France, Greece, Italy, Spain, Russian federation, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, Hungary, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Sweden, Bahrain, Brazil, New Zealand, China, Israel, Hong Kong, Norway, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.
  • Maximum Head Lift: 15 ft
  • Type: Heat Pump
  • Brand: Bestway
  • Suitable For: Above Ground Pools
  • Voltage: 220-240v

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New

(48 mm) Interface Swimming Pool Heater. The Electrical pool heater is designed specifically for the needs of the Jacuzzi. The thermostat can keep the water temperature between 20-40(68-104) adjustable, set a most comfortable bath temperature. Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating, and protect users against danger. Please strictly follow the instructions before use. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. The inner tank of the thermostat is stainless steel, which does not rust and the water quality is cleaner. The heating is fast, and steam can be quickly released in a short time. Once the temperature is over 60(140), the temperature protection device will trip automatically. Thermostat with a pressure-sensitive switch can be protected from a dangerous operating system in the absence of water. Once the water level is low (water pressure is below 20KPa), the pressure sensor switch will interrupt the power supply. Thermostat temperature preset by the user based on, until the self-heating temperature. When the water temperature drops a few degrees, the thermostat will automatically turn on the heating. The product is small in size, easy to carry and install. It can be installed in the circulation massage tube at the bottom of the bathtub. The thermostat for home sauna is also widely used commercially. It can be applied to multiple scenes such as indoor and outdoor small swimming pools and bathtubs. AC 220-240 V / 50-60 Hz. 2.7-3.3 KW. (3 x 4 mm²). Pipe Dimeter: 1 (2.54 cm). 10.4″ x 4.9″ x 4.9(264 x 125 x 125 mm). Net Weight: 4.4 lbs (2 kg). Suitable For: Max 2 cbm Hot Tub & Swimming Pool Equipment. 1 x Water Heating Thermostat. SMART THERMOSTAT – The thermostat comes with a temperature probe, which can sensitively sense the temperature of the pool water. The heating can automatically adjust to the set value of the thermostat. Adjustable temperature range of 20-40(68-104), time can be freely set. SAFE & RELIABLE – If the temperature of the water or thermostat housing exceeds 60°C (140°F), the high-temperature protection device will immediately trip. Once the flow is small or not enough water pressure, the thermostat will switch off the power automatically, prevents the thermostat from being damaged by dry burning. DURABLE MATERIAL – The inner tank of the thermostat is stainless steel, and it has a long service life without rust. Internal use of international cables, in line with international standards, without having to worry about product quality problems during use. SIMPLE OPERATION – The internal circulation of the water heater is smooth, with no scum. It is easy to disassemble. After the correct installation, the user rotates the control switch to set the temperature and the heating indicator lights. The water will automatically heat up to the level set by the user and maintain the temperature. MULTIPLE USAGES – Jacuzzi water heater operation is fully automatic and easy to use. It is suitable for heating constant temperature systems such as small hot springs, swimming pools, and jacuzzis. Note: Cable Wire without Plug. Do not place any electrical appliances within 1.5 meters of the thermostat. Do not use the thermostat in saltwater, acid water, or alkaline water. Do not use a thermostat where chemically aggressive gases or solvents. Do not install the thermostat outlet of the bathtub in the middle of pipes or valves or check valves. Temperature heaters should be used with 550W or higher circulating water pumps for normal use. Please use it along with the circulating water pump of different specifications, rather than alone. Do not use it without water. It must be connected to the pool with water for use. It is assembled with cable wire, but without a plug, so the power cord is needed. As the power is high, you’d better use it with independent sockets, rather than the plug board. 1.89(48 mm) Interface Swimming Pool Heater. 1.97(50 mm) Interface Swimming Pool Heater. 0.12″ x 0.16″ (3 x 4 mm²). 1 (2.54 cm). 4.4 lbs (2 kg). 2 cbm Hot Tub & Swimming Pool Equipment. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Oncethe temperature is over 60(140), the temperature protection devicewill trip automatically. Thermostatwith a pressure-sensitive switch can be protected from a dangerousoperating system in the absence of water. Once the water level is low(water pressure is below 20KPa), the pressure sensor switch willinterrupt the power supply. Thermostattemperature preset by the user based on, until the self-heatingtemperature. When the water temperature drops a few degrees, thethermostat will automatically turn on the heating. Theproduct is small in size, easy to carry and install. It can beinstalled in the circulation massage tube at the bottom of the bathtub. Thethermostat for home sauna is also widely used commercially. It can beapplied to multiple scenes such as indoor and outdoor small swimmingpools and bathtubs. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. All emails will be responded to within 12-24 hours. The item “Electric Water Heater Thermostat 3KW 220V Swimming Pool & Bath SPA Hot Tub New” is in sale since Tuesday, September 15, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “qiannlan-3″ and is located in Perth Amboy, New Jersey. This item can be shipped to United States, Canada.
  • BTUh Heating Rating: /
  • Model: B-M3-48MM
  • Water Temperature Range: /
  • Energy Star: 5 Stars
  • Tank Capacity: Max 2CBM
  • Type: Pool Heater
  • MPN: ZY8LX0090
  • Brand: VEVOR
  • Manufacturer Warranty: 2 years
  • Amperage: 14A
  • Heating System: Instantaneous (Tankless)
  • Country/Region of Manufacture: China
  • Power Source: Electric
  • Features: Automatic Heating
  • Material: Metal
  • Current: 14A
  • Wire: 3*4 Square millimeter
  • Pipe Dimeter: 2.54cm/1inch
  • Power: 2.7-3.3KW
  • Suitable For: Hot Tub,Swimming Pool,Jacuzzi,Spa
  • Size: 264 * 125 * 125mm/10.4*4.9*4.9inch
  • Net Weight: 2kg/4.4lbs
  • Phase Parameters: Single Phase
  • Package: 1 x Water Heating Thermostat,2 x Interface,1 x Manual
  • Color: As picture shows
  • Interface size: 48mm/1.89″
  • Capacity: Max 2CBM
  • Voltage: AC220-240V/50-60Hz

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

15KW swimming pool heater SPA electric water heater constant temperature hot tub

You may also like. 15KW swimming pool heater SPA electric water heater constant temperature hot tub. 15KW 220V/240V/380V Swimming Pool & SPA Hot Tub Electric Water Heater DigitalThermostat. When placing an order, please pay attention to the voltage, otherwise it will be sent according to the voltage of your country. Series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Read through the manual carefully to know better about the heater’s installation and operation, and check the parameters before installation. Check the circulation system first before turn on the heater. Never disassemble the heater when connecting to power supply. Never turn on the heater without water. No power switch is designed for the heater. The front panel switch can only turn off the controller, thus you should cut off the main power supply before performing maintenance or repair. Proper grounding is important. Start the circulation pump for at least 2 minutes before turn on the heater, and turn off the circulation pump at least 2 minutes after turn off the heater. Once unexpected high temperature 60140occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the’Reset’ button to restart the heater. Control system automatically heat-up procedure. Once reconnected to power or if the water temperature is 1 below the user setting temperature at least 10 minutes after entering the waiting stage, the heater enters the preparation stage. If hint message” does not appear on the panel within 2 minutes, and the water temperature is 1 below the user setting temperature after 2 minutes, the heater enters next stage pre-heat stage. In this stage, heater heats up for 10 seconds and waits for 90 seconds. Heating’ indicator lights for 10 seconds. If hint message” does not appear on the panel and the water temperature is 1 below the user setting temperature, heater enters next stage heat-up stage. In this stage, all heating elements turn on, and heating indicator turns on as well. If hint message” does not appear, heater will heat up to 1 above the user setting temperature, then heating indicator blinks for 2 minutes. After that, circulation pump turns off for models with circulation pump control. Heater enters next stage waiting stage. Waiting stage lasts for at least 10 minutes. 10 minutes later, if the water temperature is 1 below the user setting temperature, the heater jumps to preparation stage, otherwise, it remains in the waiting stage. The automatically heat-up process is non-stopping and will continue to circulating through all stages until the control system or heater is power off. You could ask for models with separated circulation pump control function. Increase the user setting temperature by 1 or 2. Decrease the user setting temperature by 1 or 2. Switch between temperature unitPress button for more than 3 secondspanel displays and in turns. Release the button once the unit you wish to choose appears, 5 seconds later, panel restore to display the current water temperature. Switch between temperature sensorsPress button, the panel will blink and display temperature measured by temperature sensor 2. After 5 seconds or press thebutton again, panel will restore to display current water temperature which is measured by temperature sensor 1. Temperature display and setting. Temperature display range 653 or 43127. Temperature setting range 2250 or 72122factory default temperature is 42. Press or button to increase or decrease the setting temperature by 1(2)and the panel blinks and display the setting temperature. 5 seconds later, the panel stops blinking, confirm the setting change and restore the current temperature display. If reconnected to power, the user setting temperature is set to default temperature 42. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Manual reset temperature control switch: Once unexpected high temperature 60 occurs, the temperature switch cuts off the system. Unique control system: ST series are the newest generation with our unique control system. Sensor technique are: A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations; B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater; C. Avoid affection of ion accumulation to mechanical sensors; D. Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. Housing material: Aluminum-coated plate. Net Weight: 7.5 kg/16.5lbs. Package Size: 120560380 mm/4.72214.9. 1 x Pool Heater. Does not include power plug. Order may be cancelled due to insufficient of your information. Missing item or get wrong item or damaged items, or the item seams can not work well, please keep all the items in original condition, make all the items together with packing, then take some photos of them and send us the photos by message box. (2) How we will react? (sometimes you may be requested to return the incorrect item). (3) Valid time for returning. We promise to achieve your 100% satisfaction. Thank you so much for your kindness and understanding. The item “15KW swimming pool heater SPA electric water heater constant temperature hot tub” is in sale since Tuesday, January 5, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “superstronger” and is located in . This item can be shipped worldwide.
  • Type: Pool Heater
  • Brand: Vevor
  • MPN: FGFDG007
  • Features: Automatic Heating
  • Model: ST-15-220V
  • Country/Region of Manufacture: China
  • Manufacturer Warranty: 2 years
  • Suitable For: Hot Tubs,Swimming Pool,Jacuzzi,Spa
  • Power Source: Electric
  • Voltage: 220V-380V
  • Power: 15KW
  • Energy Star: 5 Stars
  • Amperage: 50A
  • Tank Capacity: Less than 7.5 CBM
  • Item Weight: 16.5 lbs/7.5 kg
  • Heating System: Instantaneous (Tankless)
  • BTUh Heating Rating: /
  • Water Temperature Range: /
  • Current: 50A
  • Pipe Diameter: 2″/5.08 cm
  • Capacity: Less than 7.5 CBM
  • Product Size: 18.7 x 14 x 3.9″/47.5 x 35.5 x 10 cm
  • Material: Stainless Steel
  • Input Voltage: AC 220-380V 50/60Hz

Intex 28684 Electric Pool Water Heater 3KW 220V for swimming pool +thermometer

Intex 28684 Electric Pool Water Heater 3KW 220V for swimming pool +thermometer

Intex 28684 Electric Pool Water Heater 3KW 220V for swimming pool +thermometer

Intex 28684 Electric Pool Water Heater 3KW 220V for swimming pool +thermometer

Intex 28684 Electric Pool Water Heater 3KW 220V for swimming pool +thermometer

Within the specified days for processing. Pool water heater is an almost irreplaceable thing if your summer is not the hottest in the region and the night temperature drops below +20 ° C. In this case, during the day the water will not have time to warm up and it will not be very comfortable to swim. The question is especially acute if you have small children who catch colds easily. It is quite simple to use, easily mounted in frame and frameless models, and operates on a 220V network. Suitable for Easy Set pools and Metal Frame pools with a diameter of 244/305/366/457 cm. The water heater is placed in the circuit after the filter pump. This water heater is a flow-through type, therefore, it will not work without a filter pump that drives water through it. Connects to a filter pump (capacity from 2006 to 3785 l / h). Water temperature required for operation: from 17 to 35 ° C. Consumes: 3 kW / hour. It is connected in series after the filter pump with a capacity from 2006 to 3785 l / h. The pool water temperature should be between 17 and 35 ° C. Equipped with RCD (electric shock protection system), thermostat and water level indicator. Power – 3 kW (15A socket required). Hose connection hole diameter: 32 mm. Weight – 3.7 kg. The item “Intex 28684 Electric Pool Water Heater 3KW 220V for swimming pool +thermometer” is in sale since Thursday, March 18, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “vitgerkos” and is located in Rostov-na-Donu. This item can be shipped worldwide.
  • Model: 28684
  • Water Temperature Range: 95 °F
  • Power Source: Electric
  • Type: Heat Pump
  • MPN: 28684
  • Manufacturer: Intex
  • Power: 2501-3000 W
  • Brand: Intex
  • Suitable For: Above Ground Pools
  • Voltage: 220 V

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim

Powerful Self-Priming IP55 2.5HP Electric Motor. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. Voltage:110V / 60Hz. Head:Max 19m / 62.34ft. 2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim. Inlet:1.5” Internal. Outlet:1.5” Internal. Pipe Compatibility:Fit 1.5 inch plumbing internally. Weight: 10.2 kg / 22.5 lbs. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. Max 19m / 62.34ft. 600 x 205 x 350mm/ 24 x 8.07 x 14inch (L x W x H). 10.2kgs / 22.5 lbs. D2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swimt be received within 7 days after auctions ended. Items are dispatched within 24 hours (except weekends and holidays). The item “2.5HP 1850W Swimming Pool Water Pump Electric Self Priming Pressure Filter Swim” is in sale since Tuesday, October 27, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “peesi888_8″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.
  • Type: SPP250E
  • Brand: Unbranded
  • UPC: Does not apply
  • Model: SPPE 250
  • Speed: 560 L/m
  • Horsepower: 1850W/2.5HP
  • Pool Type: SPP250E
  • Voltage: 110V / 60Hz
  • IP55 INS CL.: Max. 50 C
  • Amps: 16
  • Head: Max 19m / 62.34ft
  • Capacitor: 25 F
  • Inlet: 1.5” Internal
  • Outlet: 1.5” Internal
  • Noise Level: <65dB
  • Package Size: 600 x 205 x 350mm/ 24 x 8.07 x 14inch (L x W x H)
  • Weight: 10.2kgs / 22.5 lbs

Sunfire Solar Vacuum Tube Hot Water / Pool Heater

Sunfire Solar Vacuum Tube Hot Water / Pool Heater

Sunfire Solar Vacuum Tube Hot Water / Pool Heater

Sunfire Solar Vacuum Tube Hot Water / Pool Heater

Get a jump on Pool Season or heat your Hot Tub. After the initial investment, there’s no fuel charge. Sunfire Solar Vacuum Tube Water/Pool Heaters. These are NOS and consist of the Manifold and stand in one box and require twenty five 47mm X 1500mm vacuum tubes. These are low pressure as there are no Heat Pipes. Water flows through the Tubes, although with the addition of a Heat Exchanger, they could heat a pressurized system. I would recommend UShip. This consists of the Manifold box aprox. 12″ X 8″ X 70 and 40lbs. And the Solar Tubes 13″ X 10″ X 62 and 75 lbs. Packed twenty four to the box. The panel requires 25, so the last tube and the 3 extras are loose. The best bet is to order six manifolds and I’ll send seven boxes of tubes. That way there are none loose and more shipper friendly. The item “Sunfire Solar Vacuum Tube Hot Water / Pool Heater” is in sale since Wednesday, March 24, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “finewood69″ and is located in Shreveport, Louisiana. This item can’t be shipped, the buyer must pick up the item.
  • Power Source: Solar
  • Type: Solar Pool Heater
  • Brand: Sunfire
  • Suitable For: Above Ground Pools

1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground

1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground

1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground

1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground

1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground

1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground

1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground

1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground

1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground

1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground

1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground

Package includes: 1x electric water pump; 2x seal rings; 4x hose adaptors; 1x instruction manual Weight: 9.5kg/ 21lbs Rated voltage: 110V/ 60Hz Power: 1100W/ 1.5HP AMPS: 8.3 Flow Max: 84GPM/ 5040GPH Waterproof level: IPX5 Head Max: 17m/1418 Inlet & outlet dia: 1-1/2 NPT. 1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground. Description: This swimming pool pump has 1.5hp, 84gpm strong motor which makes it a super efficient equipment for water pumping. Its filter can prevent sewage does damage to the motor. Its suitable for swimming pool, garden, or industrial use, etc. Now high quality comes at a great price. Dont hesitate to take it home! Inner diameter of the Fitting for pool hose: 48.5MM Features: Brand new & high quality 1.5HP, 84GPM strong motor Simple assembly Ideal for home, garden, industrial use etc Specifications: Package includes: 1x electric water pump; 2x seal rings; 4x hose adaptors; 1x instruction manual Weight: 9.5kg/ 21lbs Rated voltage: 110V/ 60Hz Power: 1100W/ 1.5HP AMPS: 8.3 Flow Max: 84GPM/ 5040GPH Waterproof level: IPX5 Head Max: 17m/1418 Inlet & outlet dia: 1-1/2 NPT. The item “1.5HP Swimming Pool Electric Pump SPA DC 5040 GPH 1-1/2 NPT Water Above Ground” is in sale since Friday, February 5, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “factorydirectsale” and is located in Fontana, California. This item can be shipped to United States.
  • Brand: COSTWAY
  • Type: Electric Pump
  • Features: Save energy
  • Power Source: Electric
  • Model: Does not apply
  • Item Height: 15 in
  • Item Width: 9 in
  • Item Length: 24 in
  • MPN: ET1184-110V
  • Set Includes: 1 x electric water pump
  • Assembly Required: Yes
  • Assembly Status: Assembly Required
  • Color: Black
  • Department: Adults
  • Firmness: Firm
  • Indoor/Outdoor: Outdoor
  • Number of Items in Set: One-Piece
  • Product: Electric Pump
  • Room: Patio
  • Size: 24” x 9” x 15” (L x W x H)
  • Style: Modern
  • Weight: 21 lbs

Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa

Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa

Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa

Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa

Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa

Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa

Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa

Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa

Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa

Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa

Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa

Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa

SEA 24 heat pipe vacuum tube pressurized solar thermal collector – SRCC Certified. Why choose solar water heater? Solar water heating is clean and efficient and helps save energy and reduce greenhouse gas emissions. Using the sun’s energy to heat water can lower your utility bills and reduce your carbon footprint. Lower gas utility bills. Extend three times your water tank’s lifetime. Solar water heater will increase your house value. Green energy, benefit community and environment. Heat pipe vacuum tube collector is the best solar absorber used in today’s solar thermal system, which has the most efficiency rate transferring solar energy into heat. The collector is provided by SEA Groups Ltd. This collector is a medium sized heat pipe collector with 24 tubes, which can heat a 50 gallon normal residential water heater in sunny environment (average annual solar energy isolation around or above 5 kwh/square meter). Features of the heat pipe vacuum tube collector. Internationally certified most widely used solar thermal collector. Eliable, efficient heat absorb coating. Inside copper thermal heat pipes for quick heat gathering with easy plug-in installation. Provide system regular pressure above 8 bar/116psi. For four seasons, in all areas comparing. Flat Panel type and. Stable solar conversion throughout the four seasons. No corrosion or water scaling problems. All aluminium casing and mounting frame. Commercial solar water heating applications. Size of the 24 heat pipe vacuum tube collector. 78 x 82 x 5. Important: Applying SEA’s. Proprietary technology, Retrofitting an exiting gas or electrical water heater into solar water heater – US Patent 8,375,934 B2, one 18 heat pipe vacuum tube pressurized collector can supply solar energy for a normal residential house. Packing: three carton boxes (in) 76x12x6. We supply local customer’s installation and customer’s service. We can install the solar water heater on your roof or on your wall (depend on your house Which side face to sun). What’s the advantage of Pressurized collectors? The Pressurized collectors have no water in the vacuum tubes. Pressurized solar system which can tie into your existing pool equipment, install easily, no maintenance, etc. Can one collector heat the pool? No, one collector is not enough to heat the pool. How many collectors do I need to heat the pool? One collector has 33 square foot solar absorb area, you estimate the absorbing area 50% of your pool. For example: 15’30′ swimming pool , 2030/2/33=9 This pool need 9 collectors to heat the pool. Do I need a controller? You need a solar temperature difference controller to control the pump run and turn off. The item “Solar Water Thermal Collector SEA 24 Heat Pipe Vacuum Tube Pressurized Pool/Spa” is in sale since Saturday, April 21, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “lyvon74″ and is located in Las Vegas, Nevada. This item can be shipped to United States.
  • Model: SEA-FZ24
  • Power Source: Solar
  • Type: Solar collector
  • MPN: SEA-SOLAR COLLECTOR
  • Swimming Pool Heater: Solar collector
  • Style: Green energy saving
  • Brand: SEA
  • Heating System: Swimming pool

Salt Chlorine Generator Pool Water Complete Salt Chlorinator System for 10K Gal

Salt Chlorine Generator Pool Water Complete Salt Chlorinator System for 10K Gal

Salt Chlorine Generator Pool Water Complete Salt Chlorinator System for 10K Gal

Salt Chlorine Generator Pool Water Complete Salt Chlorinator System for 10K Gal

Salt Chlorine Generator Pool Water Complete Salt Chlorinator System for 10K Gal

Salt Chlorine Generator Pool Water Complete Salt Chlorinator System for 10K Gal

Salt Chlorine Generator Pool Water Complete Salt Chlorinator System for 10K Gal

Salt Chlorine Generator Pool Water Complete Salt Chlorinator System for 10K Gal

Salt Chlorine Generator Pool Water Complete Salt Chlorinator System for 10K Gal

An this be used with 1.5 inch pipe lines? I have an i. Nground pool that is 3. Will it affect the perform. Will the pump still work. Rinator is applicable to all swimming pools within 10,600 Gallons. I have it for my. Nd I’m super happy with it. Note that the chlorinator doesn’t really oppose the flow of water, so it shouldn’t affect the pump operation. If this part is damaged within two years, it can be replaced once for free. The product is a complete salt water system which include Salt Cell, Control Panel and an external Power Adapter. You don’t need any other power source for the salt cell. Please read the manual carefully before use and operate according to the instructions. The item “Salt Chlorine Generator Pool Water Complete Salt Chlorinator System for 10K Gal” is in sale since Friday, March 26, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Equipment Parts”. The seller is “dp4store” and is located in Rowland Heights, California. This item can be shipped to United States.
  • Brand: Unbranded
  • Type: Chlorine Generator Control Panel
  • Product Warranty: 2 Years Warranty for the Control Panel
  • Pipe Size for Install: 1.5 inches
  • MPN: Does Not Apply
  • Set Includes: Power Adapter
  • Features: Control panel & Salt Chlorinator has a one-piece design
  • Application Area: For swimming pool less than or equal to 10,600 gallons