Above Ground Pool Solar Space Saver Heating System. (2)2.5′ x 10′ Solar Heating Panels. (2) 2.5′x10′ Panels = 4′x10′ System. Increases pool temperature up to 10 degrees for a more comfortable swim! Requires a minimum 3/4 HP pump for installations no more than 20 feet from the pool and no more than 1 story high. A 1 HP pump is required for any installation 30 feet away and 1 story up. Includes all hardware except hoses and piping to hook up to the filter. Best installed in areas that receive 6 or more hours of sun. Panels installed on an angle, should be installed at a 30 degree angle facing south for the best results. Diverter Kit (used to turn off panels) is highly recommended – Sku #6767. ABOVE-GROUND POOL SIZING CHART – 2.5′ x 20′ 12′ – 15′ Rnd. 1 collectors 40,000 BTU 18′ – 24′ Rnd. 2 collectors 80,000 BTU 27′ – 28′ Rnd. 3 collectors 120,000 BTU 12′ x 24′ Ovl. 1 collectors 40,000 BTU 15′ x 30′ Ovl. 2 collectors 80,000 BTU 16′ x 32′ Ovl. 2 collectors 80,000 BTU 18′ x 34′ Ovl. 3 collectors 120,000 BTU. All items are brand new. These rates apply to the lower 48 states only. Box & APO/FPO Addresses. If you fail to receive your order within 1 week, please notify us immediately. The free listing tool. The item “Above Ground 4×10 Space Saver Solar Panel Collector Kit” is in sale since Wednesday, April 17, 2013. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “dohenypoolsuppliesfast” and is located in Kenosha, Wisconsin. This item can be shipped to United States.
An integral part of the Pool Fence DIY pool safety system from Life Saver, this kit features a self-closing, self-latching gate that will help make your backyard pool area a safer place for children. The Pool Fence DIY Gate operates with sturdy double-truss uprights, ultra-reliable magnetic latch (designed specifically for securing gates around swimming pools), and self-closing gate hinges. The Pool Fence DIY Gate has a 4-foot height (recommended by the Consumer Product Safety Commission) with a 2-foot walk-through opening. Its aluminum, powder-coated square stock matches Life Saver’s Pool Fence DIY durable mesh fencing. The UV-resistant mesh provides years of use in all weather conditions. The gate has an adjustable swing for left- or right-handed opening. All hardware for concrete installation included. Easy-to-install, do-it-yourself gate kit for use with the Pool Fence DIY safety system; helps keep kids safe from accidental falls into your pool. 2-foot walk-through opening and recommend height of 4 feet. 4′ Tall X 36 Wide. Aluminum, powder-coated square stock; sturdy double-truss uprights; industrial-strength mesh. Ultra-reliable magnetic gate latch and self-closing gate hinges. The item “Brand New Pool Fence DIY by Life Saver Self-Closing Gate Kit, Black” is in sale since Wednesday, May 9, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Fences”. The seller is “thelittledealscom” and is located in West Palm Beach, Florida. This item can be shipped to United States.
Easily customizable to fit around your pool, the Pool Fence DIY mesh pool safety system from Life Saver helps protect against accidental falls into your pool and can be installed by yourself (no contractor required). This 12-foot long section of fence has a 4-foot height (recommended by the Consumer Product Safety Commission) to help make your backyard pool area a safer place for children. In addition to concrete and subtantial surfaces, Pool Fence DIY by Life Saver can be installed into pavers, on sand/crushed stone, on a wood deck, and into dirt, rock gardens, and other loose surfaces. The UV-resistant mesh provides years of use in all weather conditions. The stainless steel pins are easily inserted into the supp;ied sleeves (after installation) and exceeds most local safety requirements. The fence can be removed when no children are present. To determine how much fencing your pool area needs, measure around the edge of your pool and leave 24 to 36 inches of space for walking and cleaning. After determining your total footage, divide by 12 to calculate the correct number of sections needed. When installed, poles are spaced out every 36 inches. Installation requires a rotary hammer drill with a standard 5/8-inch x 14-inch (minimum) masonry bit (not included). The item “New Life Saver V110P-5 DIY Pool Fence Section 4 X 12 Section Color Black” is in sale since Sunday, February 7, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Fences”. The seller is “everything_manly” and is located in West Palm Beach, Florida. This item can be shipped to United States.