Tag Archives: pool

Aboveground Swimming Pool Solar Blanket Cover Saddle Set of 5 Brackets

Aboveground Swimming Pool Solar Blanket Cover Saddle Set of 5 Brackets

Aboveground Swimming Pool Solar Blanket Cover Saddle – Set of 5 Brackets. Simply pull your solar cover into the cradles of the Solar Saddle, and it will keep your pool area neat while maintaining your solar cover when it’s not in use. The unique cradling system keep your solar cover off of your deck or lawn. Made of five smooth and rounded saddle holders, the saddle is quick to mount to your pool and quick to remove with the breakaway connection. Store your cover in the Solar Saddle by pulling it off of your pool, sliding it into the cradles, folding it accordion-style. Pull the cover back up and over your pool top to reset your solar cover. This can be done while in the pool or out of it, along the sides. When mounting the Solar Saddle, be sure to space the five cradles evenly apart, allowing for 2 1/2′-3′ of solar cover overhang on each end. All necessary isntallation hardware is included. Installtion of the Solar Saddle should take approximately 20-30 minutes. Drill with 1/4 metal drill bit. The Solar Saddle unit comes with 5 saddles, 5 mounting brackets, 10 stainless steel pan head bolts and hex nuts, and five mounting pins to attach the saddles to the brackets. Locate where you want to place the saddles. Mount the center bracket. Hold the bracket under the top rail, close to the side wall. Mark where the 1/4 holes will be drilled by holding the bracket up as a location guide. Two holes are required per bracket. Locate where to place the outside saddle brackets. Measure around the outside of the pool 10 feet (each way from the center bracket) and place the outside brackets. NOTE: If you have a large pool you just fold the solar cover back on top of the outside saddles. This allows the solar saddle to be used with the largest sizes of pools. Now mount the last two saddles between the center and outside saddles. The holders extend from the side of the pool about 18″ and down the edge of the pool about 19″. The item “Aboveground Swimming Pool Solar Blanket Cover Saddle Set of 5 Brackets” is in sale since Wednesday, January 31, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Covers & Reels”. The seller is “savemoreonpoolsupplies” and is located in Tonawanda, New York. This item can be shipped to United States.
  • Cover Function: Solar Heating
  • MPN: 841000
  • Brand: SMOPS
  • Type: Cover Roller
  • Pool Type: Above-Ground

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP

This is a 16 Sand filter with 6 way valve operation for above-ground and in-ground swimming pool. It is perfect for filtering sand and clearing the water, which brings you a clean swimming environment and a good mood to swim. 1-25 Gallon Grow Bags Green Life & Loving home. Add to Favorite Sellers. Sign up to Newsletter. 16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP. 16 Sand filter with 6 way valve operation for above-ground and in-ground swimming pool to filter sand and clear the water, brings you a clean swimming environment and a good mood to swim. 6 way valve operation for conveniently using. Filter – for filtering water. Backwash – for cleaning the filtermedia. Rinse – for flushing the filter system. Waste – for bypassing the filter bed to waste. Recirculate – for bypassing the filter bed to the swimming pool. Closed – for closing all flow to the filter. 8 Hydraulically Balanced Laterals – Speed up flow velocity of filtered water. Pressure Watch – to show the working pressure. Rugged and Durable Construction – Provides long lifespan. Easy Operation – 1 Handle for easily choosing the proper function as you like. Suggested Installation: Fits 0.35HP – 0.75HP pool pump(Not Included), above-ground or in-ground pools. XH: 15 9/16″ x 31 11/16″ (39.6 x 80.5 cm). Handle Length: 4 5/16 (11 cm). Design Flow Rate: 30 GPM, 7.9 Cubic Per Hour. Working Pressure: 50 PSI (3.5 Bar). Filter Area: 1.25 Square Feet (0.12 Square Meter). Required Filter Sand Type: 0.45 to 0.56 mm. Required Sand: 100 Lbs (45 kg). Outer Material: PP + 30% Gas Permeable. Net Weight: 17.64 Lbs (8 kg). 1 x DIY 16 Sand Filter(Assembly Required). Please note that pump is Not included. Keep Healthy & Stay Safe. We remain OPEN and are ready to serve you. During these days, the health and safety of our customers, employees and communities is the most important. We have done and will do what we can to ensure our operations are of less impacted. Once again, take care of yourself and your family. Our company was founded in 2002 and is one of the fastest growing Internet retailers-thanks to you, our customers. And the biggest compliments we have are the hundreds of thousands of repeat customers over the years. 9:00-14:00PST Sunday-Friday All emails will be responded to within 12 hours. 8:00-14:30PST Monday-Friday. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Used items will not be accepted for return. Under no condition will Yescomusa be liable for any damages, and in particular will not be liable for special, indirect, consequential, or incidental damages, or damages for lost properties, revenue or use, arising out of or related to the Yescomusa account or the information contained within it, whether such damages arose in contract, negligence, tort, under statute, in equity, at law or otherwise. Your satisfaction is our priority! If it’s economy service, you may upgrade to UPS Ground during checkout. And you may also upgrade to UPS-2 Day or UPS 3-day Selected for most of the products. Please be noted that, this service is more recommended for Monday-Thursday orders. Orders on Friday may be processed on following Monday by UPS, according to UPS’s policy. For example, if the item a. Doesn’t match listing description b. Damaged or defective when received c. Missing spare parts d. Counterfeit or imitation goods. Chose the wrong size or feel that the product is not suitable for buyers himself b. No need this product after received c. Find a more suitable price elsewhere than choose a return. The item “16 Swimming Pool Pump Sand Filter Above Inground Pond Fountain Fit 0.35-0.75HP” is in sale since Wednesday, January 13, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Filters”. The seller is “yescomusa” and is located in La Puente, California. This item can be shipped to United States, Canada, Mexico.
  • Type: Not Available
  • Brand: Yescom
  • Model: 37SFT001-16TV6W-09
  • MPN: 37SFT001-16TV6W-09
  • Compatible Brand: N/A
  • Compatible Model: N/A

BULLDOG SQUARE SKIMMER BOX, Above Ground Swimming Pool, FREE Shipping

BULLDOG SQUARE SKIMMER BOX, Above Ground Swimming Pool, FREE Shipping

BULLDOG SQUARE SKIMMER BOX, Above Ground Swimming Pool, FREE Shipping

BULLDOG SQUARE SKIMMER BOX, Above Ground Swimming Pool, FREE Shipping

Introducing the Highest Quality, Most Durable, Strongest Square Skimmer Box on the Market! The Bulldog Square Skimmer Box and Return Kit includes the following. Gaskets for both skimmer and return. Comes with Everything You Need to get Your Pool Clean and your Filter System Running to its Full Potential! Built BULLDOG STRONG to Resist Cracks and Leaks! The item “BULLDOG SQUARE SKIMMER BOX, Above Ground Swimming Pool, FREE Shipping” is in sale since Friday, November 11, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Liners”. The seller is “poolexperts” and is located in Midlothian, Illinois. This item can be shipped to United States.
  • Type: installation aid
  • MPN: SKIM BOX
  • Brand: QUALITY POOL PRODUCTS

Ocean Blue 400650 Mighty Step 38 Wide Above Ground Swimming Pool Steps Ladder

Ocean Blue 400650 Mighty Step 38 Wide Above Ground Swimming Pool Steps Ladder

Ocean Blue 400650 Mighty Step 38 Wide Above Ground Swimming Pool Steps Ladder

Ocean Blue 400650 Mighty Step 38 Wide Above Ground Swimming Pool Steps Ladder

Ocean Blue 400650 Mighty Step 38 Wide Above Ground Swimming Pool Steps Ladder

Ocean Blue 400650 Mighty Step – 38 Wide Above Ground Swimming Pool Steps Ladder. Get the steps that make mighty good sense! The Mighty Step is made for above-ground pools 48″ to 54″ with flat bottoms. Designed with curved steps, slotted side openings for water circulation and textured risers. It has wide, flat steps with non- slip texture and two hand rails for safety and stability while exiting and entering the pool. The Mighty Step has simple, snap together assembly with minimal parts and comes with brackets to mount to pool or deck. Sturdy construction holds over 400 lbs. Dimensions: 38″ wide X 35″ deep X 45 height to the top step. You will need to add 25 lbs of play sand to each side of the step. Graceful designs with curved steps, scalloped sides and textured risers. Simple snap together assembly with minimal parts. Wide, flat steps with non-slip texture. Mounting brackets that easily attach to your deck or pool. Riser/side openings for unobstructed water circulation. Two handrails for safety and stability while entering and exiting pool. Require weight to prevent steps from floating. Meet all current ANSI/APSP standards. NOTE: Ocean Blue Steps not for use with Intex, Coleman, Bestway or any soft sided pools. The item “Ocean Blue 400650 Mighty Step 38 Wide Above Ground Swimming Pool Steps Ladder” is in sale since Thursday, February 11, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Ladders & Steps”. The seller is “savemoreonpoolsupplies” and is located in Tonawanda, New York. This item can be shipped to United States.
  • MPN: 400650
  • Brand: Ocean Blue
  • Mounting: Hook/Hanging
  • Suitable For: Above Ground Pools
  • Type: Steps

18′ Round Above Ground Swimming Pool Solar Cover Blanket 800 Series

18' Round Above Ground Swimming Pool Solar Cover Blanket 800 Series

18′ Round Above Ground Swimming Pool Solar Cover Blanket 800 Series. Reasons to Use a Solar Cover. Increase heating & insulation efficiency. Durable resin cover helps prevent unwanted dirt and debris from entering your pool. Constructed with thousands of small air bubbles to capture and transmit heat from the sun to your swimming pool. Stops water evaporation by up to 95%, greatly cutting down on heat loss. Grommets will help in draining the water from atop the cover back into the pool. Please be sure the bubbles on the cover face DOWN into the water for the best results. A solar cover is your best investment to extend your swimming season and cut heating costs! Solar blankets are made of durable resin and have thousands of tiny air bubbles designed to capture and transmit solar heat to your pool. A solar cover will keep your pool water cleaner by blocking out dirt and debris. Save on chemicals, cut water evaporation by up to 95% and prevent heat loss. Our solar covers are no longer referred to as “MIL” but as a Series. As a result of changes in materials and manufacturing processes that have been made in the solar cover industry over the years competing solar cover products with the same Mil no longer perform equally. The item “18′ Round Above Ground Swimming Pool Solar Cover Blanket 800 Series” is in sale since Monday, May 2, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Covers & Reels”. The seller is “usapoolsuperstore” and is located in Churchville, New York. This item can be shipped to United States.
  • Cover Function: Solar Heating
  • MPN: TS3B0018
  • Brand: USA SuperStore
  • Type: Cover
  • Pool Type: Above-Ground
  • Suitable For: NA
  • Item Diameter: NA
  • Item Height: NA
  • Item Length: NA
  • Material: NA

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Please contact our customer service team immediately if: 1. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Tuesday, July 21, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “fansdealonline” and is located in Westbury, New York. This item can be shipped to United States.
  • Features: Easy Installation
  • Certification: UL Certification
  • MPN: YCBHBP
  • Qmax: 410 L/min
  • Item Width: 9.6″
  • Hmax: 15.5 Meter
  • Installation: Universal Installation
  • Voltage: 110-120V/220V-240V
  • Horsepower: 1.5HP
  • Item Length: 22.4″
  • Item Height: 11.4″
  • Amper: 10.8/5.4A
  • Motor Shaft Material: Stainless Steel
  • Suitable For: Above Ground Pools
  • Power Source: Corded
  • Material: ABS
  • Minimum Pump Power Requirement: 1 1/2 hp
  • Speed: Single-Speed
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1100W/1.5HP
  • Item Weight: 26lbs
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • RPM: 3450/min
  • Power Cord: 59″
  • Pool Type: In Ground &Above Ground
  • Brand: FANSDEALONLINE
  • Warranty: 5 Years
  • Color: Black
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Type: Pool Pump

Confer Plastics Step-1 Heavy-Duty Pool Steps For Above Ground Swimming Pools

Confer Plastics Step-1 Heavy-Duty Pool Steps For Above Ground Swimming Pools

When combined with #Step-1 it forms an economical Entry/Exit System for 48 to 54pools. Outside treads swing up into an upright position for security. 18 wide: 22high handrail, 9-1/2 span. Weight guideline: 300 lbs. For above ground pools with flat bottoms. Easy, snap together installation. Large, flat steps (each with 270 square inches) complete with two all-plastic handrails. Mounting brackets included; secures unit to pool or deck. Side openings allow water circulation behind unit to inhibit algae growth. Gray steps for high visibility in water. Economical, yet strong; holds 400 pounds. Fits Decks up to 60. Height to Top Step 47 inches. Height to Handrail 38 inches. Projection into Pool 32 inches. Riser Height 11 inches. Step Dimensions : 10 x 27. All items are brand new unless otherwise indicated. These rates apply to the lower 48 states only. Box and APO/FPO Addresses. The item “Confer Plastics Step-1 Heavy-Duty Pool Steps For Above Ground Swimming Pools” is in sale since Thursday, July 30, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Ladders & Steps”. The seller is “poolsuppliessuperstore” and is located in Kenosha, Wisconsin. This item can be shipped to United States.
  • MPN: Does Not Apply
  • Brand: Confer Plastics
  • Type: Steps

EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50t Cord V PENTAIR

EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50t Cord V PENTAIR

EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50t Cord V PENTAIR

EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50t Cord V PENTAIR

EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50t Cord V PENTAIR

EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50t Cord V PENTAIR

EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50t Cord V PENTAIR

EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50t Cord V PENTAIR

EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50t Cord V PENTAIR

EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50t Cord V PENTAIR

EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50t Cord V PENTAIR

EPISTAR LED POOL LIGHT spa size 50ft wire. EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50ft Cord V PENTAIR. True white amazing quality. Here is what you get. 50FT heavy duty thick cord connected to OEM direct fit Epistar LED pool light rated at over 70,000 hours! This is the SPA (smaller) size. We also carry the Standard large sizes, 50ft , 100ft. Our price is for a limited time. I will eventually raise the price. This is wholesale level price. The brightest and most efficient LEDs available. Custom reflector and lens eliminate glare and hot spots. Wide angle light position for greater underwater coverage or narrow angle for increased light intensity and distance. Superior lens geometry and exclusive reflector design combine to create a wider beam and more uniform light distribution. Ideal for both residential and commercial pools. Compatible with any standard stainless steel and plastic niches , COMES WITH NEW STAINLESS STEAL NICHE AS A BONUS. 12v version if you are running 120V you will need a simple step down from 120v to 12v from power box much safer than running 120v into the pool. Many states are passing the Law 12v into the pool. Epistar LabTM provides services, with our research and development team, to engineers and customers with both general information and project-specific assistance. Our team also provides support and advice regarding system design and implementation, LED component selection, product development tools, and other pertinent design issues. Besides, Epistar LabTM’s major focus is to develop and perfect the mass production of LED chips that will popularize LED general lighting. The leaders of Epistar foresaw LED’s dominance in general lighting as early as 1996. This strategic head-start has allowed us to offer superior chips for everyday illumination. Today our lighting advantage is further enhanced by our dedicated research center- the Epistar LabTM. Why Choose LED vs Traditional Pool halogen light. LEDs are one of the most energy efficient and cost effective light sources available on the market. Their low power consumption, high reliability and long lifespan allow purchasers to realize significant energy savings and maintenance reduction over the lifetime of an LED fixture. Recent advances in LED technology have prompted governments to quickly adopt the technology. With energy demand and prices rising, cities, states and countries are quickly moving to LEDs to reduce the demand on their power grid. Consumers are rapidly realizing the benefits as well. LED lights boast durations of tens of thousands of hours. With this longevity, people may not see the LEDs in their fixtures burn out in their lifetime. In fact, the life of an LED is about 50,000-100,000 hours or just over 11 years of continuous use. The long lifetime of an LED leads to fewer bulbs changed, and fewer bulbs thrown away. Because LEDs use electricity very efficiently, greenhouse gas emissions are also reduced. While traditional lighting sources such as fluorescents use chemicals like mercury, LEDs use phosphor and other safe materials without a negative ecological footprint. Fluorescents have specific instructions for disposal, but an LED can simply be recycled. It must be unused. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Here is what you get: 100FT heavy duty thick cord connected to OEM direct fit Epistar LED pool light rated at over 70,000 hours!! Features —The brightest and most efficient LEDs available —Custom reflector and lens eliminate glare and hot spots —Wide angle light position for greater underwater coverage or narrow angle for increased light intensity and distance —Superior lens geometry and exclusive reflector design combine to create a wider beam and more uniform light distribution —Ideal for both residential and commercial pools —Compatible with any standard stainless steel and plastic niches , COMES WITH NEW STAINLESS STEAL NICHE AS A BONUS. –12v version Epistar LabTM provides services, with our research and development team, to engineers and customers with both general information and project-specific assistance. Why Choose LED vs Traditional Pool halogen light: LEDs are one of the most energy efficient and cost effective light sources available on the market. EPISTAR LED POOL LIGHT. EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 100ft Cord V PENTAIR. 100FT heavy duty thick cord connected to OEM direct fit Epistar LED pool light rated at over 70,000 hours! The item “EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 50t Cord V PENTAIR” is in sale since Wednesday, March 13, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool & Spa Lights”. The seller is “savingswear4u” and is located in Las Vegas, Nevada. This item can be shipped to United States.
  • Model: LED
  • UPC: 880540591059
  • Custom Bundle: No
  • Bulb Type: Led
  • Modified Item: No
  • Type: Underwater Light
  • MPN: Does Not Apply
  • Brand: EPISTAR
  • Non-Domestic Product: No

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

Please fill the pump body with water before energizing. If the mechanical seal is operated in a dry condition, it will Damage to the mechanical seal and impeller causing water leakage. Powerful Self-Priming IP55 2.5HP Electric Motor. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. 2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo W/ Strainer Baske. Voltage:110V / 60Hz. Head:Max 19m / 62.34ft. Inlet:1.5” Internal. Outlet:1.5” Internal. Pipe Compatibility:Fit 1.5 inch plumbing internally. Weight: 10.2 kg / 22.5 lbs. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. Max 19m / 62.34ft. 600 x 205 x 350mm/ 24 x 8.07 x 14inch (L x W x H). 10.2kgs / 22.5 lbs. B Damage caused by natural disasters, flood fire, lightning or pollution. C If item was opened, any parts removed or repaired by any unauthorized person. D If damaged parts are the TFT screen or the screen has less than 3 dead pixels. The item “2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske” is in sale since Monday, October 5, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “9hk4872″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.
  • Type: SPP250E
  • Brand: Unbranded
  • UPC: Does not apply
  • Model: SPPE 250
  • Speed: 560 L/m
  • Horsepower: 1850W/2.5HP
  • Pool Type: SPP250E
  • Voltage: 110V / 60Hz
  • IP55 INS CL.: Max. 50 C
  • Amps: 6.8
  • Head: Max 19m / 62.34ft
  • Capacitor: 25 F
  • Inlet: 1.5” Internal
  • Outlet: 1.5” Internal
  • Noise Level: <65dB
  • Package Size: 600 x 205 x 350mm/ 24 x 8.07 x 14inch (L x W x H)
  • Weight: 10.2kgs / 22.5 lbs
  • MPN: Does not apply

Bestway 58173E 18 Foot Round Above Ground Swimming Pool Solar Heat Cover, Blue

Bestway 58173E 18 Foot Round Above Ground Swimming Pool Solar Heat Cover, Blue

Bestway 58173E 18 Foot Round Above Ground Swimming Pool Solar Heat Cover, Blue

Bestway 58173E 18 Foot Round Above Ground Swimming Pool Solar Heat Cover, Blue

Bestway 58173E 18 Foot Round Above Ground Swimming Pool Solar Heat Cover, Blue

Bestway 58173E 18 Foot Round Above Ground Swimming Pool Solar Heat Cover, Blue

Tools & Home Improvement. Patio, Lawn & Garden. Beauty & Personal Care. Pro Audio & Sound. Car Audio & Electronics. Sign Up for Our. Bestway 58173E 18 Foot Round Above Ground Swimming Pool Solar Heat Cover, Blue. The Bestway 18 Foot Solar Cover is a pool cover that works hard to keep debris out of your pool and keep the heat in. Solar covers reduce evaporation and radiant heat loss by trapping the heat inside your pool and collecting the rays of the sun for additional heating. They also provide a barrier in-between the water surface and falling debris. This cover is simple to use. It fits on the inside of Steel Pro Frame Pools and stays in place. Designed for use with the 18 foot round, above-ground pools or similar pools by Intex or Summer Escapes. Keep your pool heating costs down this season with the 18 Foot Solar Cover. Contents: 1 solar pool cover. Floats on water surface to provide heat insulation. Keeps out debris and sunlight. Fits 18 Foot Steel Pro Frame Pools. Dimensions: 207 inch diameter. Weight: 3.2 pounds. Cover Size: 18 feet. Pool Size Compatibility: 18 feet. Questions about this item? Cancelling Your Order: Your order is important to us and will be processed immediately. Select the reason for the return. We welcome your inquiry! The item “Bestway 58173E 18 Foot Round Above Ground Swimming Pool Solar Heat Cover, Blue” is in sale since Tuesday, June 2, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Covers & Reels”. The seller is “vm-express” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada.
  • Cover Function: Solar Heating
  • Country/Region of Manufacture: Unknown
  • Cover Material: Mesh
  • Item Diameter: 207 in
  • Model: 18 Foot
  • Pool Type: Above-Ground
  • Brand: Bestway
  • Type: Cover
  • Material: Plastic
  • Suitable For: Solar Heating Cover
  • Shape: Round
  • MPN: 58173EBW