Tag Archives: hayward

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Please contact our customer service team immediately if: 1. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Tuesday, July 21, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “fansdealonline” and is located in Westbury, New York. This item can be shipped to United States.
  • Features: Easy Installation
  • Certification: UL Certification
  • MPN: YCBHBP
  • Qmax: 410 L/min
  • Item Width: 9.6″
  • Hmax: 15.5 Meter
  • Installation: Universal Installation
  • Voltage: 110-120V/220V-240V
  • Horsepower: 1.5HP
  • Item Length: 22.4″
  • Item Height: 11.4″
  • Amper: 10.8/5.4A
  • Motor Shaft Material: Stainless Steel
  • Suitable For: Above Ground Pools
  • Power Source: Corded
  • Material: ABS
  • Minimum Pump Power Requirement: 1 1/2 hp
  • Speed: Single-Speed
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1100W/1.5HP
  • Item Weight: 26lbs
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • RPM: 3450/min
  • Power Cord: 59″
  • Pool Type: In Ground &Above Ground
  • Brand: FANSDEALONLINE
  • Warranty: 5 Years
  • Color: Black
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Type: Pool Pump

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Maintain a crystal clear and sparkling pool or spa that everybody loves with the new SPPE series self-priming 1850W electric swimming pool pump. How to use 1. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight 3. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. The installation must be according to the normal power indicated on the label. The amperage must not at any time exceed the value indicated on the label It is recommended that you consult a state-registered electrician. Place the pump in a dry area with good ventilation. The ambient temperature must not exceed 40 The pumps are only suitable for counter-clockwise rotation when viewing from the pump end. Three phase motors can rotate in either direction. Interchanging any of the cables on a three-phase motor will reverse the rotation. Momentarily start, or bump the motor without water in the tank, to check the rotation of the pump shaft. Before disconnecting electrical connections, shut off electricity at its source. Newer work on pump without making certain the power is OFF. This appliance is not intended for use by persons, including children with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety Children should be supervised to ensure that they do not play with the appliance. Voltage : 110V / 60Hz. Head : Max 19m / 62.34ft. Inlet : 1.5 Internal. Outlet : 1.5 Internal. Pipe Compatibility : Fit 1.5 inch plumbing internally. Weight : 10.2 kg / 22.5 lbs. 1 x SPPE250 Swimming Pool Pump. 1 x User’s Manual. Powerful Self-Priming IP55 2.5HP Electric Motor, low noise with quiet operation and no leak. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that¡¯s why our customers keep coming back. The item “Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor” is in sale since Saturday, November 21, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “vipshopmarket” and is located in Westbury, New York. This item can be shipped to United States.
  • Amper: 16A
  • Horsepower: 2.5HP
  • Speed: Single-Speed
  • Qmax: 560 L/min
  • Hmax: 21 Meter
  • Frequency: 60HZ
  • Max. Flow: 560 L/min
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Power Cord: 59″
  • Certification: UL Certification
  • Warranty: 5 Years
  • Type: Pool Pump
  • Brand: VIPSHOPMARKET
  • Manufacturer Warranty: 5 years
  • Power: 1850w
  • Suitable For: Above Ground Pools
  • Pool Type: In Ground &Above Ground
  • Motor Shaft Material: Stainless Steel
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1850W/2.5HP
  • Color: Black
  • Voltage: 110 V

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

For more information on our products. Please send message to us. InGround Swimming Pool Pump Motor w/ Strainer Generic Hayward Replacemen 1.5HP. What Customers Have To About Us. ” Delivered as promised and item is as described “. Just what i was looking for. Had a problem-was able to successfully resolve it. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. 104 Degree Fahrenheit (40 Degree Celsius). 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). All items are dispatched from our warehouse in Azusa, CA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. 25 years Industry Experience. The item “1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground” is in sale since Tuesday, January 19, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “ftpress” and is located in Westbury, New York. This item can be shipped to United States.
  • Brand: FTPRESS
  • Type: Pool Pump
  • Voltage: 115-230V
  • Pool Type: In Ground &Above Ground
  • Motor Shaft Material: Stainless Steel
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1100W/1.5HP
  • Color: Black
  • Amper: 10.8/5.4A
  • RPM: 3450/min
  • Horsepower: 1.5HP
  • Speed: Single-Speed
  • Qmax: 410 L/min
  • Hmax: 15.5 Meter
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Power Cord: 59″
  • Certification: UL Certification
  • Warranty: 5 Years
  • Material: ABS,PVC, Stainless Steel, Copper
  • Model: 1.5HP
  • Item Height: 11.4″
  • Item Length: 22.4″
  • Item Width: 9.6″
  • Item Weight: 26lbs
  • Installation: Universal Installation
  • Features: Easy Installation
  • Suitable For: Above Ground Pools

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). We have Four warehouses located in CA, NY, NJ & GA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. The item “115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Wednesday, July 22, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “homesupplies01″ and is located in Westbury, New York. This item can be shipped to United States.
  • Features: Easy Installation
  • Manufacturer Warranty: 5 years
  • Certification: UL Certification
  • MPN: 2040700300
  • Qmax: 410 L/min
  • Item Width: 9.6 in
  • Hmax: 15.5 Meter
  • Installation: Universal Installation
  • Voltage: 110-120V/220V-240V
  • Horsepower: 1.5HP
  • Item Length: 22.4 in
  • Item Height: 11.4 in
  • Amper: 10.8/5.4A
  • Motor Shaft Material: Stainless Steel
  • Suitable For: Above Ground Pools
  • Material: ABS,PVC, Stainless Steel, Copper
  • Minimum Pump Power Requirement: 1 1/2 hp
  • Speed: Single-Speed
  • Model: 1.5HP 110V-240V
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1100W/1.5HP
  • Item Weight: 26 lb
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Power: 1100 W
  • RPM: 3450/min
  • Power Cord: 59″
  • Pool Type: In Ground &Above Ground
  • Brand: HOMESUPPLIES
  • Warranty: 5 Years
  • Color: Black
  • Energy Star: A+++
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Type: Pool Pump

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement. Reliable performance with 304 grade stainless steel motor shaft. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. 2 HP In-Ground Pump also work with above. Compatible with DE, sand, and cartridge filter. Self-priming for in-ground functionality. Drain plug for easy winterizing. High durability with corrosion proof polymer. ETL Certificate, UL Certificate for motor. Kindly note:These pumps are capacitor start and not for use/sale in California. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “2HP Dual Voltage Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Friday, August 2, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States.
  • Horsepower: 2hp
  • Speed: Single-Speed
  • RPM: 3450
  • GPH: 5520
  • Type: Swimming pool pump
  • Hmax: 79ft
  • Pool Type: In-Ground
  • MPN: J15001
  • Brand: iMeshbean

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward

Always pay attention before use. Before use, please adjust to the corresponding voltage for home use, and then fill the water pump with water before using it, otherwise the motor will be damaged. When adjusting the voltage, be sure to adjust after turning off the power. Otherwise the motor will be damaged. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Durable Corrosion -Stainless Steel 2.0 HP Shaft, the shaft is constructed with a reinforced thermoplastic body for longer life and durability. The sand filter is made of PPGF30 + PC, 100% drip proof, effective insulation and protection against pool chemicals, heat-resistant double-sized seal for long motor life. POOL PUMP-This self-priming heavy-duty pump delivers outstanding performance and reliability at a fantastic price and costs less than big name brands. The mighty force of this pump makes it efficient and an economical choice. UL Certified- This Swimming Pool Pump has a UL Certification to ensure recognized Standards for Safety. Type: Swimming Pool Pump. Motor Shaft Material: Stainless Steel. Pump Housing Material: PPGF30 + PC (anti-Oxident). Rated Power: 1500W/2.0HP. Inner/Outer coupling: 1-1/2”NPT G2-1/4′. 1 x Water Pump. 2 x 1-1 / 2”NPT Inner coupling. 2 x 48.5mm Inner coupling(free gift). The item “New 2HP 110V InGround Swimming Pool Portable Pump Motor Above Ground For Hayward” is in sale since Sunday, June 21, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “magicshop26″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.
  • Brand: Unbranded
  • MPN: 2040700200M
  • Horsepower: 2hp
  • Pool Type: Above-Ground
  • Type: Swimming Pool Water Pump
  • Speed: Max Flowrate: 410L/min
  • Style: Modern
  • Custom Bundle: No
  • Modified Item: No
  • Model: 2040700200M
  • Color: Black
  • Rated Power: 1500W/2.0HP
  • Max Flow Rate: 410L/min
  • UL Approval: Yes
  • Voltage: 110-120V/220-240V 60Hz
  • Inner/Outer coupling: 1-1/2”NPT G2-1/4”
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Motor Shaft Material: Stainless Steel
  • Max Height: 12.5M

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Maintain a crystal clear and sparkling pool or spa that everybody loves with the new SPPE series self-priming 1850W electric swimming pool pump. How to use 1. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight 3. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. The installation must be according to the normal power indicated on the label. The amperage must not at any time exceed the value indicated on the label It is recommended that you consult a state-registered electrician. Place the pump in a dry area with good ventilation. The ambient temperature must not exceed 40? The pumps are only suitable for counter-clockwise rotation when viewing from the pump end. Three phase motors can rotate in either direction. Interchanging any of the cables on a three-phase motor will reverse the rotation. Momentarily start, or bump the motor without water in the tank, to check the rotation of the pump shaft. Before disconnecting electrical connections, shut off electricity at its source. Newer work on pump without making certain the power is OFF. This appliance is not intended for use by persons, including children with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety Children should be supervised to ensure that they do not play with the appliance. Voltage : 110V / 60Hz. Head : Max 19m / 62.34ft. Inlet : 1.5 Internal. Outlet : 1.5 Internal. Pipe Compatibility : Fit 1.5 inch plumbing internally. Weight : 10.2 kg / 22.5 lbs. 1 x SPPE250 Swimming Pool Pump. 1 x User’s Manual. Powerful Self-Priming IP55 2.5HP Electric Motor, low noise with quiet operation and no leak. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. We have Four warehouses located in CA, NY, NJ & GA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. The item “Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US” is in sale since Wednesday, November 11, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “homesupplies01″ and is located in Westbury, New York. This item can be shipped to United States.
  • Features: Rust Resistant
  • Manufacturer Warranty: 5 years
  • Certification: UL Certification
  • Qmax: 560 L/min
  • Item Width: 6.9″
  • Hmax: 21 Meter
  • Installation: Universal Installation
  • Voltage: 110 V
  • Horsepower: 2.5HP
  • Item Length: 22.4″
  • Item Height: 12.2″
  • Amper: 16A
  • Motor Shaft Material: Stainless Steel
  • Suitable For: Above Ground Pools
  • Power Source: Corded
  • Material: ABS,PVC
  • Speed: Single-Speed
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1850W/2.5HP
  • Item Weight: 30 lb
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Power: 1850w
  • Power Cord: 59″
  • Pool Type: In Ground &Above Ground
  • Brand: HOMESUPPLIES
  • Warranty: 5 Years
  • Color: Black
  • Energy Star: A+++
  • Frequency: 60HZ
  • Max. Flow: 560 L/min
  • Type: Pool Pump

Lemonpool PCB Main Circuit Board&PCB Display Board Fits Hayward AquaRite System

Lemonpool PCB Main Circuit Board&PCB Display Board Fits Hayward AquaRite System

Lemonpool PCB Main Circuit Board&PCB Display Board Fits Hayward AquaRite System

Lemonpool PCB Main Circuit Board&PCB Display Board Fits Hayward AquaRite System

Lemonpool PCB Main Circuit Board&PCB Display Board Fits Hayward AquaRite System

LemonPool PCB Main Circuit Board Compatible with Hayward Goldline. Are you tired of paying excessively high prices for quality reliable products for your pool? Our mission is to deliver quality products using only the best material in the industry at an affordable price to our customers. Be sure to look at all the other great products we offer! Main and display board compatible with Hayward® AquaRite System. Compatible with Hayward® part number GLX-PCB-RITE Main PCB board and GLX-PCB-DSP display PCB. Not work with Hayward® automated systems. Fit Hayward AquaRite® T-CELL-15, T-CELL-9 and T-CELL-3. Perform with all the same features as your original. Compatible with both 110V and 220V. AquaLogic®, AquaLink®, EasyTouch®, IntelliTouch®, ProLogic® etc, which not listed above, our PCB will not be compatible. All items must be in new condition, in its original packaging with any manuals and material included. The item “Lemonpool PCB Main Circuit Board&PCB Display Board Fits Hayward AquaRite System” is in sale since Monday, March 25, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Equipment Parts”. The seller is “mocraft01″ and is located in Lexington, North Carolina. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • MPN: LPMainDSP
  • Brand: LemonPool

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US

Always pay attention before use. Before use, please adjust to the corresponding voltage for home use, and then fill the water pump with water before using it, otherwise the motor will be damaged. When adjusting the voltage, be sure to adjust after turning off the power. Otherwise the motor will be damaged. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Durable Corrosion -Stainless Steel 1.5 HP Shaft, the shaft is constructed with a reinforced thermoplastic body for longer life and durability. The sand filter is made of PPGF30 + PC, 100% drip proof, effective insulation and protection against pool chemicals, heat-resistant double-sized seal for long motor life. POOL PUMP-This self-priming heavy-duty pump delivers outstanding performance and reliability at a fantastic price and costs less than big name brands. The mighty force of this pump makes it efficient and an economical choice. UL Certified- This Swimming Pool Pump has a UL Certification to ensure recognized Standards for Safety. Type: Swimming Pool Pump. Motor Shaft Material: Stainless Steel. Pump Housing Material: PPGF30 + PC (anti-Oxident). Rated Power: 1100W/1.5HP. Temp: 104 Degree Fahrenheit (40 Degree Celsius). Inner/Outer coupling: 1-1/2”NPT G2-1/4′. 1x 1.5HP Dual voltage Swimming Pool Pump. 2 x 1-1 / 2”NPT Inner coupling. 2 x 48.5mm Inner coupling. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Used items will not be accepted for return. Welcome to my store. We will reply you ASAP. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem. The item “Hayward 1.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US” is in sale since Tuesday, August 25, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “noms_4″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.
  • Brand: Hongmotor
  • MPN: 2040700300
  • Type: Pool Pump
  • Pool Type: In Ground &Above Ground
  • Horsepower: 1.5hp
  • Speed: Single-Speed
  • Model: Swimming Pool Pump
  • Qmax: 410 L/min
  • Hmax: 15.5 Meter
  • Dual voltage: 110-120V/220-240V
  • Power: 1100W/1.5HP
  • Frequency: 60HZ
  • Color: Black
  • Certification: UL Certification

1.5/1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1.5/1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1.5/1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1.5/1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1.5/1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1.5/1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1.5/1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1.5/1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1.5/1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1.5/1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1.5/1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1HP 115v Above GROUND Swimming POOL PUMP MOTOR w/ Strainer, High-Flo, Hi-Rate Inground 1.5” pipe size. Powerful pump for above ground pools. High flow rate makes it more efficient and capable in pool cleaning. A see-thru cover with cam-lock lid quick inspect and tool-free service. The strainer basket with internal ribs assure flow when filled with leaves and debris. High-tech motor with qualified material provide with cooler running and longer life. 1 HP Above-Ground Pump also work with above Compatible with DE, sand, and cartridge filter Self-priming for Above-ground functionality Can be installed as 115V. Drain plug for easy winterizing. High durability with corrosion proof polymer. ETL Certificate, UL Certificate for motor 1.5 HP Above-Ground Pump also work with above Compatible with DE, sand, and cartridge filter Self-priming for Above-ground functionality Can be installed as 115V. ETL Certificate, UL Certificate for motor. 1 x Pool pump. 1 x Power cord with US plug. 2 x Pool pump adapters. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “1.5/1HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Wednesday, January 15, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States.
  • Power cord length: 79”/2m
  • Frequency: 60Hz
  • Pool Type: Above-Ground
  • MPN: J07503/J15002
  • Brand: iMehsbean
  • Speed: Single-Speed
  • Horse power: 1.5/1 hp
  • NPT size: 1.5”
  • RPM: 3450
  • GPH: 5280/5400